Description
Adamat alignment tool for clutch discs of BMW gearboxes
With this BMW clutch alignment tool from Adamat Performance you align the clutch discs precisely before the gearbox goes onto the engine. Adamat recommends the tool especially when fitting multi-disc clutches, where several discs have to be neatly in line at the same time.
The tool sits in the hub with a 0.05 mm fit, so the discs do not shift while you tighten the pressure plate. It works with original and replacement clutch discs and with the sports discs that Adamat makes itself.
Adamat supplies the tool in three splines. When ordering, you choose the profile of your gearbox’s input shaft.
Key benefits
- 0.05 mm fit for accurate alignment of the discs
- Recommended for multi-disc clutches, such as a twin-disc clutch
- Discs stay in place while you tighten the pressure plate
- Works with original and replacement discs and with Adamat sports discs
- Three splines: 23×29-10N, 28×35-10N and 29,5×35-26N
- For BMW gearboxes behind straight-six, V8 and diesel engines
Suitable for
Application: clutch discs of manual BMW gearboxes
| Spline | Gearboxes according to Adamat |
|---|---|
| 23×29-10N (10 teeth) | Gearboxes behind the straight-six M50, M52, M54, S50 and S52 and the V8 M60 and M62 |
| 28×35-10N (10 teeth) | Gearboxes of the E46 M3 with S54 and of the E46 and E39 with M57 |
| 29,5×35-26N (26 teeth) | Including GS6 series gearboxes of the E60 and E61 with M57N and M57N2 |
The tool fits all clutch discs with the chosen spline. If you are unsure which profile your gearbox has, check the hub of your current clutch disc or contact us.
Technical specifications
- Manufacturer: Adamat Performance (Poland)
- Item number: ADM-ALIGN-BMW
- Fit: 0.05 mm
- Splines: 23×29-10N, 28×35-10N or 29,5×35-26N
- Application: centring clutch discs during fitting, especially with multi-disc clutches
- Suitable for: original and replacement clutch discs and Adamat sports discs
Fitting and delivery
You insert the tool through the hubs of the clutch discs so that they sit exactly in the centre while you tighten the pressure plate. You then remove the tool, and the input shaft of the gearbox slides through the discs without searching.
Choose the spline of your gearbox when ordering. Adamat Performance ships the tool from Poland. The lead time is 1 to 2 weeks.
Clutch discs aligned to within 0.05 mm before the gearbox goes on, in the profile of your BMW gearbox.
Why choose this BMW clutch alignment tool?
With a clutch with two or more discs, every disc must sit exactly in the centre, otherwise it is difficult to get the gearbox onto the engine. Because Adamat makes sports clutches for BMW gearboxes itself, this tool is matched to their own discs and also fits original and replacement discs. With splines that match the shaft of your gearbox exactly, you fit the clutch correctly the first time.
Frequently asked questions
Which spline do I need?
That depends on your gearbox. The table above shows which gearboxes belong to which profile. You choose the spline when ordering.
Does the BMW clutch alignment tool also work with a single-disc clutch?
Yes, the BMW clutch alignment tool works with original and replacement clutch discs. Adamat recommends it especially for multi-disc clutches, where alignment is the most difficult.
Does the tool fit Adamat clutch discs?
Yes, the tool is made for Adamat’s sports discs and also fits original discs with the same spline.
What is the lead time?
Allow 1 to 2 weeks.
Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.











Reviews
There are no reviews yet.