Description
BMW E46 X-Brace 6-Point Saloon and Coupé
This BMW E46 X brace is an extended reinforcement with six mounting points for the rear of the E46. The tubular structure connects the mounting points of the rear subframe to each other and so reinforces the whole area where the rear axle is attached to the body. The result is a stiffer rear end that flexes less under load.
The BMW E46 X brace is made for builders who use the car for drifting, track days or the quarter mile, but also for anyone who simply wants a stiffer and tighter rear end. It fits the coupé and the saloon.
Contents
Key benefits of this BMW E46 X brace
- Six mounting points that reinforce the entire mounting area of the rear subframe
- Made of 40 x 2 mm tube, the same type of tube as used for roll cages
- MIG/MAG-welded in dedicated jigs by a certified welder
- Mounting cups laser-cut and bent on CNC press brakes, with pressed mounting holes
- Finished with a black powder coating
- Mounting bolts included
- Fits the coupé and saloon
Suitable for
BMW 3 Series E46
- BMW E46 coupé
- BMW E46 saloon
Technical specifications
- Item number: 0244
- Type: extended rear X-brace with 6 mounting points
- Tube: 40 x 2 mm
- Welding: MIG/MAG, in jigs, by a certified welder
- Mounting cups: laser-cut, CNC-bent, pressed holes
- Finish: black powder coating
- Included: mounting bolts
- Mounting: drill holes in the body according to the installation photos
Installation and delivery
To fit the BMW E46 X brace, you have to drill mounting holes in the body. To help with positioning, installation photos are available that show where the brace goes. First place the brace loosely in position, mark the holes and check that lines, cables and the tank stay clear before you start drilling.
Tighten the bolts to the correct torque and check them again after the first drives. The BMW E46 X brace belongs to our strut braces and braces category. If you also drive an E36, take a look at the 6-point rear X brace for the BMW E36.
Six points, roll cage tube and a clean finish: this is how you make the rear of an E46 truly stiff.
Why choose this BMW E46 X brace?
A simple strut brace connects only two points. This BMW E46 X brace tackles the entire rear subframe mounting, at all mounting points at once. Thanks to the thick-walled tube, the welding in jigs and the neat powder coating, it is a part that is both strong and looks tidy in the boot. If you want to reinforce the rear of an E46 seriously, this is a good choice.
On the E46 in particular, the rear subframe mounting is a well-known weak spot. A stiff connection between the mounting points helps to spread the forces from the rear axle better, especially with a limited-slip differential, high-grip tyres and a lot of power. Feel free to combine the BMW E46 X brace with floor reinforcements for a complete approach.
Frequently asked questions
Does the E46 X brace also fit a Touring?
The BMW E46 X brace is made for the E46 coupé and saloon. The fit for the Touring has not been confirmed.
Do I have to drill anything for the installation?
Yes. You have to drill mounting holes in the body. Installation photos help you determine the right position.
Are the bolts included?
Yes, the mounting bolts come with the BMW E46 X brace.
What material is the brace made of?
40 x 2 mm tube, the same type as used for roll cages, MIG/MAG-welded and black powder-coated.
What exactly does an X-brace do?
It connects the mounting points of the rear subframe and so reinforces the area where the rear axle is attached to the body.
Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.














Reviews
There are no reviews yet.