Shop

Description

Front strut brace BMW F23 F87 M2 F20 F21 F22

With this BMW F20 strut brace you link the two front strut towers of your 1 Series or 2 Series together. The brace fits the F20 and F21 hatchback, the F22 coupé, the F23 convertible and the BMW M2 F87. The result is a front end that gives less when you turn hard into a corner.

Owners of an M2, M135i or M235i who use their car on the circuit or at a drift event in particular will notice the difference. But a daily-driven 1 Series also gets a tighter steering feel from it. A BMW F20 strut brace is therefore a simple first step for anyone who wants to tackle the suspension seriously.

Key benefits of this BMW F20 strut brace

• Less movement between the strut towers under lateral load
• More direct steering response, noticeable when turning in
• Flat oval steel profile 40 x 20 mm, wall thickness 3 mm
• Expertly welded with MIG/MAG in special welding jigs by a certified welder
• Powder-coated black, blends in nicely in any engine bay
• Fits on the original holes in the body
• Suitable for the F20, F21, F22, F23 and the M2 F87

Suitable for

BMW 1 Series, 2 Series and M2 of the F generation

• BMW 1 Series F20 (5-door)
• BMW 1 Series F21 (3-door)
• BMW 2 Series F22 coupé
• BMW 2 Series F23 convertible
• BMW M2 F87

Technical specifications

• Item number: 0011
• Position: front, between the strut towers
• Colour: black
• Main profile: flat oval steel of 40 x 20 mm
• Wall thickness: 3 mm
• Production: MIG/MAG-welded in special welding jigs
• Finish: powder coating
• Weight: 2.84 kg

Installation and delivery

According to the manufacturer, the brace is fitted to the original mounting holes in the body. So no drill or welder is involved. A socket set, a ratchet and a torque wrench are all you need. First clean the contact surfaces on the towers, so that the feet of the BMW F20 strut brace sit flat with no dirt underneath.

Put the car with its wheels on the ground before you tighten the bolts. That way the suspension is in its normal position. Looking for more reinforcements for your project? Take a look in our strut braces for front and rear category. If you have a 3 Series or 4 Series, our strut brace for the BMW F30 up to and including F82 fits.

A compact car with plenty of power needs a front end that does not flex.

Why choose a BMW F20 strut brace?

The 1 Series and 2 Series are short, light and rear-wheel drive, which makes them popular with drifters and trackday drivers. With stiffer springs or coilovers, more force goes into the strut towers. A BMW F20 strut brace absorbs those forces with a strong 3 mm steel profile and makes sure the front axle keeps doing exactly what you want.

Frequently asked questions

Does this brace fit the BMW M2 F87?

Yes. The M2 F87 is explicitly on the list of fitting models, just like the F20, F21, F22 and F23.

How much does the BMW F20 strut brace weigh?

It weighs 2.84 kg.

Do I need to modify anything on the body?

No. The brace is fixed to the original mounting holes; you do not have to drill or weld.

Can the BMW F20 strut brace be used together with coilovers?

Yes. The brace sits on top of the strut towers and changes nothing about the ride height or the setup. With stiffer suspension it is actually more useful, because the towers are then loaded harder.

What material is the brace made of?

Steel: a flat oval profile of 40 x 20 mm with a 3 mm wall, finished with black powder coating.

Will I notice the difference on public roads?

Most drivers notice a calmer, more direct steering feel, especially on twisty roads. On the circuit or when drifting, the difference is clearest.

Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.