BMW E30 E36 Top Mounts Raised by 90MM

€72,69 Incl. VAT

BMW E30 E36 Top Mounts Raised by 90MM

Set of two raised rear top mounts with a 90 mm raise, for the BMW E30, E36, E36 Compact, Z3 and Z4. Ideal for extremely lowered cars or shock absorbers from another model. Housing and flange made of 8 mm S355 steel, zinc-plated bush and nuts and 80 Shore A rubber that handles heat and wear better than polyurethane.

Available on back-order|Estimated delivery time: 4 to 7 working days

SKU: 0223-90 Category:

Description

BMW E30 E36 Top Mounts Raised by 90MM

These top mounts raised by 90mm are the highest version of our raised rear top mounts for the BMW E30, E36, Z3 and Z4. The shock absorber mounting point sits no less than 90 mm higher. This means the shock absorber keeps enough working room even on an extremely lowered car or with shock absorbers from another model. The set consists of two pieces.

This version is intended for those who really want to go low without the rear riding on the shock absorber bump stop. Think of drift and rally sprint cars, stance projects and powerful road cars on short coilovers.

Key benefits of these top mounts raised by 90mm

  • 90 mm raise of the shock absorber mounting point, for very low cars
  • Lets the shock absorber work properly even with extreme lowering
  • Usable with shock absorbers from other models
  • Housing and flange made of 8 mm S355 steel
  • Zinc-plated bush and nuts
  • 80 Shore A rubber with higher temperature and wear resistance than polyurethane
  • Significantly longer service life than original parts, according to the manufacturer
  • Set of two for left and right

Suitable for

BMW 3 Series E30 and E36, Z3 and Z4

  • BMW 3 Series E30
  • BMW 3 Series E36 and E36 Compact
  • BMW Z3
  • BMW Z4 E85 and E86

If you need less of a raise, there is also a 60 mm version. A separate version is available for the E46.

Technical specifications

  • Item number: 0223-90
  • Type: raised rear top mounts (shock absorber mount)
  • Raise: 90 mm
  • Housing and mounting flange: S355 steel, 8 mm
  • Bush and nuts: zinc-plated
  • Rubber hardness: 80 Shore A
  • Contents: 2 pieces
  • Weight: 1.50 kg

Installation and delivery

You fit the E36 top mounts raised by 90mm in place of the original upper rear shock absorber mounts. Put the car securely on axle stands, support the rear axle and remove the shock absorbers. Fit the new top mounts on the shock absorbers and reinstall everything. Stick to the correct tightening torques and check the connections after a short test drive.

With a 90 mm raise, the position of the shock absorber changes considerably. So after fitting the top mounts raised by 90mm, check that there is enough clearance all round and that the shock absorber does not bind at full compression and full extension. Then have the wheel alignment checked.

You will find all versions in our top mounts category. If 90 mm is too much, choose the 60 mm raised top mounts for the E30 and E36.

As low as you want, with a shock absorber that simply keeps doing its job.

Why choose these top mounts raised by 90mm?

On an extremely lowered E30 or E36, a standard top mount falls short: the shock absorber then has hardly any travel left. These top mounts raised by 90mm solve that with a much higher mounting point, sturdy 8 mm steel and rubber that can handle heat and wear. A robust base for a car that sits low and is driven hard.

Frequently asked questions

When do I need 90 mm instead of 60 mm?

When the car sits so low that the shock absorber still has too little travel with a 60 mm raise, or when you use shock absorbers from another model that need more room.

How many top mounts are in the set?

The top mounts raised by 90mm come as a set of two, one for each side of the car.

Which models do they fit?

The BMW E30, E36, E36 Compact, Z3 and Z4 E85/E86.

What kind of rubber is used?

80 Shore A rubber that is more resistant to heat and wear than polyurethane.

Do the top mounts raised by 90mm fit an E46?

No, there is a separate E46 version for that.

Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.

Additional information

Weight1,50 kg
Car make

BMW

Model

E30, E36

Reviews

There are no reviews yet.

Be the first to review “BMW E30 E36 Top Mounts Raised by 90MM”
EN

Your Shopping cart

Close