Shop

Description

BMW E36 Rear Axle Carrier Reinforcement, Weld-in Kit

This E36 rear axle carrier reinforcement is a repair and reinforcement kit for the rear subframe of the BMW E36. Corrosion of the rear axle carrier is a well-known problem on the E36. With this weld-in kit, you reinforce the critical areas of the carrier, or you repair them and reinforce them in the same job.

The parts are deliberately not flat plates. They are shaped and bent to follow the curves and contours of the carrier. As a result, they fit closely, which makes welding a lot easier and stronger. A separate version is available for the E36 Compact.

Key benefits of the E36 rear axle carrier reinforcement

• Reinforces or repairs the critical zones of the rear axle carrier
• Aimed at the rust problem of the E36 carrier
• Parts shaped to the contours of the carrier
• 3 mm thick S355 steel
• Laser-cut and then bent on CNC press brakes
• Tested on several carriers in different conditions
• Photos with areas marked in red for the correct position

Suitable for

Rear axle carrier of the BMW E36

• BMW 3 Series E36
• Not for the E36 Compact: a separate version is available for it

Technical specifications

• Item number: 0217
• Application: repair and reinforcement of the rear axle carrier
• Material: S355 steel
• Thickness: 3 mm
• Production: laser-cut, bent on CNC press brakes
• Installation: welded onto the carrier
• Weight: 2.90 kg

Installation and delivery

The parts of the E36 rear axle carrier reinforcement are welded onto the carrier. Depending on the condition of your carrier, it may be necessary to tap the curved parts lightly into shape with a hammer so that they sit properly. The photos show in red where each part goes.

Preferably work with the carrier out of the car. Clean the steel around the weld areas down to bare metal, test-fit everything first and then weld. Afterwards, protect the carrier well against new rust. You will find more parts under chassis and subframe reinforcements. If you also want to make the rear of the body stiffer, take a look at the 4-point X-brace for the E36.

A rusty E36 carrier does not always have to go: with this weld-in kit, you repair and reinforce it.

Why choose this E36 rear axle carrier reinforcement?

You do not want a corroded carrier under a car that is driven hard. With this E36 rear axle carrier reinforcement made of 3 mm S355 steel, you tackle the critical areas in one go. The parts follow the shape of the carrier, so you lay tight, strong welds. Not only does that save you searching for a replacement carrier, you also know exactly what condition the part your rear axle hangs on is in. Especially on an E36 that is drifted or gets more power, that is reassuring.

Frequently asked questions

Does the kit have to be welded?

Yes, the E36 rear axle carrier reinforcement is welded onto the carrier. Have this done by an experienced welder.

Does everything fit straight away?

Depending on the condition of your carrier, you sometimes have to tap the curved parts lightly into shape with a hammer.

Does the kit fit the E36 Compact?

No, there is a separate version for the Compact.

How thick is the steel?

The parts are made of 3 mm thick S355 steel.

Can I also use the kit as a precaution?

Yes. You can reinforce a carrier that is still sound as a precaution, or repair a corroded carrier and reinforce it at the same time.

Does the carrier have to come out of the car?

We strongly recommend it. That way you can remove the rust thoroughly, test-fit the parts and reach everywhere properly for welding.

Where exactly do the parts go?

The locations are marked in red on the product photos of the E36 rear axle carrier reinforcement.

Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.