Description
Harness bar BMW E46 Coupé Compact harness mount
With this harness bar BMW E46 you mount the shoulder straps of racing harnesses at the correct angle behind the front seats of an E46 coupé or Compact. The crossbar is fixed in the car’s original factory holes and is supported by two adjustable diagonal stays that end in uniballs.
If you fit a bucket seat and multi-point harnesses in your E46, you need a solid anchor point for the shoulder straps. This bar gives you that anchor point without having to get a complete roll cage built straight away, ideal for club racing, drift days and track work.
Contents
Key benefits of this harness bar BMW E46
- Mounts in the original factory holes, no welding
- Adjustable support stays with uniballs at the ends
- Harness angle designed according to the FIA recommendations
- Stops prevent the harnesses from sliding along the entire length of the bar
- MIG/MAG-welded in jigs by a certified welder
- Black textured powder coating
Suitable for
BMW 3 Series E46 with two doors
- BMW 3 Series E46 coupé
- BMW 3 Series E46 Compact
Technical specifications
- Item number: 0135
- Application: mount for the shoulder straps of racing harnesses
- Support stays: adjustable, with uniballs
- Harness angle: designed according to the FIA recommendations
- Harness stops: yes, to prevent sliding along the bar
- Welding: MIG/MAG, in welding jigs, by a certified welder
- Finish: black textured powder coating
- Mounting: original factory holes
- Weight: 7.9 kg
Installation and delivery
The harness bar BMW E46 is fixed in the car’s original factory holes, so no drilling or welding in the body is needed. For fitting, you do need to carefully trim the B-pillar trim cover so that the bar can pass it neatly. Take your time and measure a few times before you cut.
Then adjust the diagonal support stays until they sit in place without tension and tighten all bolts to the correct torque. Route the shoulder straps between the stops and check the harness angle relative to your shoulders according to the instructions of your harness manufacturer.
You will find racing harnesses and other parts for a safe seating position in our harnesses and harness bars category.
A good harness is only as strong as the point it is attached to. This bar gives your E46 that anchor point in the factory holes.
Why choose this harness bar BMW E46?
The bar is made for the E46 coupé and Compact and is fixed to points that BMW itself already put in the body. The harness angle follows the FIA recommendations, the stops keep the straps in place and the welding is done in jigs by a certified welder. With adjustable stays, you tailor the bar to your car.
A harness bar is often the first step towards a serious club racing or drift E46. You can use racing harnesses without having a full roll cage made straight away, and the bar combines well later with bucket seats and seat mounts.
Frequently asked questions
Do I need to weld or drill to fit the bar?
No. The harness bar BMW E46 goes in the original factory holes. The B-pillar trim cover does have to be carefully trimmed.
Does the bar fit an E46 saloon or Touring?
The bar is designed for the E46 coupé and Compact. No fitment is stated for other body styles.
Why are there stops on the bar?
They prevent the shoulder straps from sliding along the entire length of the bar.
How heavy is the harness bar?
The bar weighs 7.9 kg.
Is the bar FIA-homologated?
The harness angle is designed according to the FIA recommendations. An FIA homologation of the bar itself is not stated.
Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.





Reviews
There are no reviews yet.