Description
BMW E30 Hidden Hydraulic Handbrake in Original Location
This E30 hidden hydraulic handbrake goes exactly where the original handbrake sits in your BMW E30. It fits the existing holes in the centre tunnel, so the interior looks almost standard. Yet you have a hydraulic handbrake that locks the rear wheels through the brake system.
Intended for drifting, rally and club sport. Please note: the original handbrake comes out and this handbrake has no ratchet, so after fitting the car no longer has a parking brake. A removable extension turns the short lever into a vertical handbrake.
Contents
Key benefits of this E30 hidden hydraulic handbrake
- In the original location: the interior stays virtually standard
- Fits the existing holes in the centre tunnel
- Removable extension for a vertical lever, quick to fit and remove
- No ratchet: the lever does not lock in place and therefore does not work as a parking brake
- Fits the type of gaiter shown in the photos
- Suitable for building a separate additional brake circuit
Suitable for
BMW 3 Series E30
- BMW E30, in place of the original handbrake
- Drift, rally and club sport cars
Technical specifications
- Item number: 0101
- Type: hidden hydraulic handbrake in the original location
- Mounting: in the original holes of the centre tunnel
- Lever: short, with removable extension
- Ratchet: no
- Brake line fittings required: 3/8″ UNF and 7/16″ UNF (not included)
- Weight: 1.94 kg
Installation and delivery
First remove the original handbrake. You bolt the new handbrake into the existing holes in the tunnel. To connect it you need brake line fittings with 3/8″ UNF and 7/16″ UNF thread; these are not included. You get the best result with a separate brake circuit and extra calipers at the rear, with adapters that are available separately.
Because the lever is short, it takes more force than a vertical handbrake with a long lever. That is what the extension is for: put it on when you go drifting and take it off again afterwards. Bleed the system after fitting and test it on a closed-off site first.
You will find more handbrakes and parts in the hydraulic handbrake category. If you would rather have a vertical handbrake, take a look at the ultra-light hydraulic drift handbrake.
A hydraulic handbrake in the place of the original: no eye-catching vertical lever in your E30.
Why choose this E30 hidden hydraulic handbrake?
A vertical handbrake on the tunnel stands out straight away. This E30 hidden hydraulic handbrake sits in the place of the original, in the existing holes and under a normal gaiter. With the removable extension you still have the leverage of a drift handbrake when you need it.
Frequently asked questions
Does the original handbrake have to come out?
Yes, the E30 hidden hydraulic handbrake goes in the place of the original handbrake, which is therefore removed. Because this handbrake has no ratchet, the car no longer has a parking brake after fitting. Keep this in mind if the car is also used on public roads.
Does this handbrake have a ratchet?
No, it has no ratchet. So the lever does not lock in any position.
Which fittings do I need?
Brake line fittings with 3/8″ UNF and 7/16″ UNF thread. These are not included.
What is the extension for?
The short lever takes more force. With the removable extension it becomes a vertical lever with more leverage.
Do I have to drill into the tunnel?
No, the handbrake has mounting holes that match the original holes in the centre tunnel.
Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.









Reviews
There are no reviews yet.