Shop

Description

BMW E30 Front Subframe Reinforcement, Weld-in Kit

With this E30 front subframe reinforcement you repair and strengthen the front engine crossmember of the BMW E30. The kit is intended to repair existing damage to the crossmember and to prevent new damage. Because the E30 is a popular base for all kinds of motorsport projects, this is a part that is on the list for many builds.

Especially in drifting, circuit work or with a heavier engine, the engine crossmember has a hard time. It carries the weight of the engine and absorbs the forces of the front suspension. With this weld-in kit you give it extra strength where it is needed, so you can keep driving with peace of mind.

Key benefits of this E30 front subframe reinforcement

• Repairs a damaged front engine crossmember
• Prevents new damage to the crossmember
• Made of 3 mm thick S355 steel
• Laser-cut for an accurate fit
• Intended to be welded in, preferably before the crossmember goes into the car
• Light: 0.4 kg

Suitable for

BMW 3 Series E30

• BMW E30, front engine crossmember

Technical specifications

• Item number: 0056
• Application: repair and reinforcement of the front engine crossmember
• Material: S355 steel
• Thickness: 3 mm
• Production: laser-cut
• Fitting: weld in
• Weight: 0.4 kg

Installation and delivery

The E30 front subframe reinforcement is welded onto the crossmember. The manufacturer recommends doing this before the engine crossmember is fitted in the car. During a build, the E30 is usually stripped down completely anyway, so that is the ideal moment to reinforce the crossmember loose on the workbench.

Clean the crossmember back to bare metal and degrease it beforehand, so that the welds bond properly. Weld in short sections to limit distortion from the heat. After welding, treat the crossmember against rust, for example with primer and paint or by having it powder-coated. Welding on a suspension component is a job for an experienced welder.

You will find more parts to make your chassis stronger in our chassis and subframe reinforcements category. For the rear axle of the E30 there is also a reinforcement for the rear shock absorber mount.

A repaired and reinforced engine crossmember is the foundation of every serious E30 build.

Why choose this E30 front subframe reinforcement?

An E30 is getting on in years by now, and the front engine crossmember has often been through a lot. With these laser-cut parts made of 3 mm steel, you do not have to cut and fit plates yourself. You repair the crossmember, make it stronger and are ready for drifting, circuit use or a heavier engine.

Frequently asked questions

Does the reinforcement have to be welded?

Yes, it is a weld-in kit. The parts are welded onto the engine crossmember.

When do I weld on the E30 front subframe reinforcement?

Preferably before the engine crossmember is fitted in the car, for example during a build.

Can I also repair a damaged crossmember with it?

Yes. The kit is intended to repair the crossmember and to prevent damage.

What material are the parts made of?

3 mm thick S355 steel, laser-cut.

Is the kit also useful without an engine swap?

Yes. Even with the original engine, the engine crossmember is heavily loaded during drifting and circuit work. If the crossmember is out anyway during a build, it is worth reinforcing it straight away.

Which car does this kit fit?

The front engine crossmember of the BMW E30.

Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.