BMW E36 E46 Rear Shock Absorber Mount Reinforcement

€18,14 Incl. VAT

BMW E36 E46 Rear Shock Absorber Mount Reinforcement

Reinforcement for the rear shock absorber mount of the BMW E30, E36, E36 Compact, E46, Z3 and Z4. Made of 3 mm S355 steel, laser-cut and CNC-bent. Use it as a reinforcement plate to prevent cracks in the strut tower, or weld it in if there is already damage.

5 in stock (can be backordered)|Estimated delivery time: 1 to 2 working days

Description

BMW E36 E46 Rear Shock Absorber Mount Reinforcement

This reinforcement for the rear shock absorber mount is intended for the BMW 3 Series E30, E36, E36 Compact and E46, and for the Z3 and the Z4 (E85/E86). On cars with high mileage, the rear strut tower can start to crack around the upper shock absorber mount. This steel plate prevents that damage, or repairs the area if there are already small cracks.

Especially in drifting, track work and on cars with stiffer suspension, the rear shock absorber mount is put under heavy load. A reinforcement made of 3 mm thick steel absorbs those forces and spreads them over a larger area of the body.

Key benefits of this rear shock absorber mount reinforcement

  • Prevents cracks in the rear strut tower on older cars with high mileage
  • Repairs existing damage: with advanced wear, you weld the plate in
  • 3 mm S355 steel, a strong structural steel grade
  • Laser-cut and then bent on a CNC press brake, so accurately shaped
  • Two ways of fitting: as a reinforcement plate or welded in
  • Fits several models: E30, E36, E36 Compact, E46, Z3 and Z4
  • Light: approximately 0.12 kg

Suitable for

BMW 3 Series and Z models with the same rear strut tower

  • BMW 3 Series E30
  • BMW 3 Series E36, including E36 Compact
  • BMW 3 Series E46
  • BMW Z3 (E36)
  • BMW Z4 E85 and E86

Technical specifications

  • Item number: 0075
  • Application: reinforcement of the rear shock absorber mount (strut tower)
  • Material: S355 steel
  • Thickness: 3 mm
  • Production: laser-cut, bent on a CNC press brake
  • Fitting: as a reinforcement plate or welded in, depending on the condition of the tower
  • Weight: 0.12 kg

Installation and delivery

How you fit the reinforcement depends on the condition of the strut tower. If the rear shock absorber mount is still intact, you use the plate as an extra reinforcement ring under the mount, so that no cracks form. If there are already cracks in the panel, you weld the plate in so that the tower regains its strength.

Welding it in is a job for an experienced mechanic. Remove the trim and the sound insulation around the tower beforehand, clean the panel and treat it against rust after welding. On a car with cracks, also check the rest of the mount and the shock absorbers themselves.

You will find more parts for a stiffer body in our chassis and subframe reinforcements category. If the panel around the rear subframe is also cracking on an E46, take a look at our reinforcement for the E46 rear subframe.

A small steel plate that can prevent an expensive repair to the rear strut tower.

Why choose this rear shock absorber mount reinforcement?

Cracks in the rear strut tower are a well-known weak spot on these BMW generations, especially after years of use or with intensive track and drift work. With this plate you tackle the problem before the panel cracks further. It is simple in design, made of strong S355 steel and suitable for both preventive use and repair.

Frequently asked questions

Does the reinforcement always have to be welded in?

No. If the rear shock absorber mount is still in good condition, you use the plate as a reinforcement ring. Welding it in is only needed if the panel is already cracked.

Which models does this plate fit?

It fits the BMW E30, E36, E36 Compact, E46, the Z3 and the Z4 E85/E86.

What material is the plate made of?

3 mm thick S355 steel. The plate is laser-cut and then bent on a CNC press brake.

Do I need one or two per car?

The car has a rear shock absorber mount on the left and on the right. If you want to reinforce both sides, you need one plate for each side. If you are unsure about the quantity supplied, please contact us before you order.

Does this reinforcement also make sense for a road car?

Yes. The cracks mainly develop through age and mileage, not just through motorsport. On an E36 or E46 that is driven every day, the rear shock absorber mount is also a spot to keep an eye on.

How do I recognise damage to the rear strut tower?

Look in the boot or behind the trim at the top of the shock absorber. Hairline cracks in the panel around the mounting holes are the first sign.

Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.

Additional information

Weight0,12 kg
Car make

BMW

Model

E30, E36, E46, Z3, Z4

Reviews

There are no reviews yet.

Be the first to review “BMW E36 E46 Rear Shock Absorber Mount Reinforcement”
EN

Your Shopping cart

Close