Description
AST Weld-in Roll Cage BMW E46 Sedan V4
The AST Weld-in Roll Cage BMW E46 Saloon V4 is a full roll cage for the BMW E46 with 4-door saloon bodywork. This Weld-in E46 Saloon V4 has everything the V3 offers, plus an additional diagonal brace and a separate harness bar, so that your harnesses can be mounted to a fixed point in the structure.
The cage is designed and built by AST Roll Cages in Spain, for drivers who are often out on track and want a cage that is prepared for virtually any set of regulations.
Key benefits
- Extra diagonal brace that protects the rear section of the cage against deformation.
- Harness bar as a fixed mounting point for your shoulder straps.
- Door bars in both doors for side protection.
- FIA homologation: AST lists the numbers N-5658 and A-5658 for this model.
- 8 welded mounting points that permanently join the cage to the bodyshell.
- E355 steel, 45 mm main hoop and 40 mm for the remaining tubes.
- Weight 71 kg according to the manufacturer.
Suitable for
BMW E46, 4-door saloon
- BMW E46 4-door saloon
- Type: weld-in roll cage, version V4
- Drifting, track use and rallying
Technical specifications
- Manufacturer: AST Roll Cages
- Manufacturer part number: CMBN03833
- Sunroof: for roofs without a sunroof
- Headlining: for roofs without headlining
- Rear anchorage: in the rear suspension area
- Rear structure layout: V design
- Type: full roll cage, weld-in (permanent)
- Main hoop: E355 steel, 45 mm diameter
- Secondary structure: E355 steel, 40 mm diameter
- Foot plates: 3 mm steel, custom-designed for each car
- Mounting: 8 welded mounting points on the bodyshell
- FIA homologation number: N-5658 / A-5658 (as stated by AST Roll Cages, for the BMW 320i)
- Weight: 71 kg (manufacturer’s figure)
- Finish: unpainted weld-in kit
- Included: weld-in kit, gussets, reinforcement plates, bolts, washers and nuts, documentation, fitting instructions and sticker set
Fitting and delivery
The cage is built to order; the standard delivery time is 15 to 35 working days. Plan the fitting of the harness bar together with your seats and harnesses, as its height determines the angle of your shoulder straps. Have the welding done by a professional. AST digitises the bodyshell with laser scanners and designs the cage in 3D, so that it fits your car exactly.
The harness bar turns the V4 into a cage that not only reinforces the car but also keeps the driver in place.
Why choose this Weld-in E46 Saloon V4 roll cage?
As soon as you use a four-point or six-point harness, it needs to be attached to an approved mounting point rather than to the original bodyshell. This version solves that with its own bar behind the seats. The extra diagonal also keeps the rear section in shape, which makes the whole structure more stable under load.
Frequently asked questions
Where do I attach my harness?
The Weld-in E46 Saloon V4 has a separate harness bar behind the seats. That is where you attach the shoulder straps, which is safer than using the original mounting points in the bodyshell.
What does the extra diagonal brace add?
This bar runs diagonally across the rear section of the cage and prevents that section from distorting in a collision or under high lateral loads. The result is a structure that holds its shape better.
What is the delivery time?
The standard delivery time for this roll cage is 15 to 35 working days.
Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.








Reviews
There are no reviews yet.