Description
AST Weld-in Roll Cage BMW E30 Sedan V4
The AST Weld-in Roll Cage BMW E30 Saloon V4 is a full roll cage for the BMW E30 with 4-door saloon bodywork, intended exclusively for the rear-wheel drive E30. This Weld-in E30 Saloon V4 supplements the door bar set of the V3 with an extra diagonal brace in the main hoop and a harness bar behind the seats.
The cage is designed and built by AST Roll Cages in Spain, for drivers who race with a proper harness and want a structure that distributes the forces of a crash instead of absorbing them at a single point.
Key benefits
- Harness bar providing a fixed, correctly positioned mounting point for the shoulder straps of a four-point or six-point harness.
- Extra diagonal brace distributes torsional and impact forces across the entire main hoop instead of just one side.
- Door bars from the V3 are retained for side protection.
- Front bars to the bulkhead keep the front axle settled, just as on the V2 and V3.
- Eight welded mounting points permanently anchored in the bodyshell, with gussets at the load points.
- E355 structural steel: main hoop with a diameter of 45 mm, other tubes with a diameter of 40 mm.
- Complete weld-in kit including reinforcement plates, mounting hardware, instructions and sticker set.
Suitable for
BMW E30 3 Series, 4-door saloon, rear-wheel drive
- BMW E30 3 Series 4-door Saloon
- Exclusively for the rear-wheel drive E30; the all-wheel drive 325iX has its own AWD version
- Type: weld-in roll cage, version V4
- Drifting, track use and rallying
Technical specifications
- Manufacturer: AST Roll Cages
- Manufacturer part number: CMBN00276
- Sunroof: for roofs without a sunroof
- Headlining: for roofs without headlining
- Rear anchorage: in the rear suspension area
- Rear structure layout: X design
- Type: full roll cage, weld-in (permanent)
- Main hoop: E355 steel, 45 mm diameter
- Secondary structure: E355 steel, 40 mm diameter
- Foot plates: 3 mm steel, custom-designed for each car
- Mounting: 8 welded mounting points on the bodyshell
- Weight: 71 kg (manufacturer’s figure)
- Finish: unpainted weld-in kit
- Included: weld-in kit, gussets, reinforcement plates, bolts, washers and nuts, documentation, fitting instructions and sticker set
Fitting and delivery
The cage is built to order; the standard delivery time is 15 to 35 working days. Fix your seat position before having the harness bar welded in permanently: the angle of the shoulder straps relative to your shoulders determines whether the harness can do its job. Fitting is permanent and should be carried out by a professional.
The V4 adds the harness bar, so your harness system is finally attached to the cage instead of the bodyshell.
Why choose this Weld-in E30 Saloon V4 roll cage?
If you drive with a harness, you need a bar running behind the seat at the right height; without that point, any harness is a compromise. AST digitises the bodyshell with laser scanners and designs the cage in 3D, so that the harness bar and the extra diagonal sit exactly in place without needlessly blocking the rear seat area.
Frequently asked questions
Can I attach my harness directly to this cage?
Yes, that is exactly what the harness bar of the Weld-in E30 Saloon V4 is for. However, always check your organiser’s regulations regarding the permitted mounting method and the angle of the shoulder straps.
What is the difference from V3?
The V3 already has door bars and the front bars to the bulkhead. The V4 adds an extra diagonal brace and the harness bar, making the structure more rigid and giving your harness a correct mounting point.
What is the delivery time?
The standard delivery time for this roll cage is 15 to 35 working days.
Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.








Reviews
There are no reviews yet.