Description
AST Weld-in Roll Cage BMW E30 Coupé AWD V5
The AST Weld-in Roll Cage BMW E30 Coupé AWD V5 is a full roll cage for the BMW E30 with 2-door coupé bodywork. This Weld-in E30 Coupé AWD V5 is intended exclusively for the all-wheel-drive E30, the 325iX, and does not fit the rear-wheel-drive E30; the bodyshell of the AWD version is genuinely different. The V5 is the complete set of bars and therefore the most comprehensive specification in this range.
The cage is designed and built by AST Roll Cages in Spain, for 325iX drivers who compete and are not willing to compromise on the structure of their car.
Key benefits
- Complete set of bars with all the diagonals, door bars, front bars and the harness bar in the range.
- Maximum rigidity: the cabin becomes a single unit from the bulkhead to the rear shock towers.
- Harness bar included, so the harness straps are anchored at the correct angle behind the seat.
- Eight welded mounting points, E355 steel, 45 mm main hoop and 40 mm for the rest of the structure.
- For the 325iX only, with welded mounting points and reinforcement plates positioned on the AWD floor.
- Gussets and 3 mm plates spread the forces through the bodyshell.
- 71 kg (manufacturer’s figure), supplied unpainted so you can finish it yourself.
Suitable for
BMW E30 3 Series, 2-door coupé with all-wheel drive (325iX)
- BMW E30 3 Series 2-door Coupé
- Only the all-wheel-drive E30 (325iX); this cage does not fit the rear-wheel-drive E30
- Type: weld-in roll cage, version V5
- Drifting, track use and rallying
Technical specifications
- Manufacturer: AST Roll Cages
- Manufacturer part number: CMBN00473
- Sunroof: for roofs without a sunroof
- Headlining: for roofs without headlining
- Rear anchorage: in the rear suspension area
- Rear structure layout: X design
- Type: full roll cage, weld-in (permanent)
- Main hoop: E355 steel, 45 mm diameter
- Secondary structure: E355 steel, 40 mm diameter
- Foot plates: 3 mm steel, custom-designed for each car
- Mounting: 8 welded mounting points on the bodyshell
- Weight: 71 kg (manufacturer’s figure)
- Finish: unpainted weld-in kit
- Included: weld-in kit, gussets, reinforcement plates, bolts, washers and nuts, documentation, fitting instructions and sticker set
Fitting and delivery
The cage is built to order; the standard delivery time is 15 to 35 working days. Plan for a stripped-out cabin and an experienced welder, because with the complete set of bars the welding sequence is critical. AST digitises the bodyshell with laser scanners and designs the cage in 3D, so that it fits your car exactly.
The V5 leaves nothing out: if you want to get the most out of a 325iX, this set of bars is where you start.
Why choose this Weld-in E30 Coupé AWD V5 roll cage?
In competition use, the cage is not just about safety but also about set-up. A fully equipped structure holds the geometry of the bodyshell in place, so your suspension does what you expect of it instead of fighting against a flexing body. The V5 gives you that foundation right first time, without having to cut into a welded-in cage later on.
Frequently asked questions
What makes the V5 more comprehensively equipped than the V3?
The Weld-in E30 Coupé AWD V5 has the complete set of bars, so alongside the door bars and front bars it also gets the extra diagonals and the harness bar. That makes it the highest specification in the range for this car.
Why does this cage not fit a rear-wheel-drive E30?
This version has been measured on the all-wheel-drive E30 (325iX). That car has a different floor and tunnel from the rear-wheel-drive E30, so the welded mounting points and reinforcement plates would not line up.
What is the delivery time?
The standard delivery time for this roll cage is 15 to 35 working days.
Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.








Reviews
There are no reviews yet.