Description
AST Bolt-in Roll Cage BMW Z3 Roadster V3
The AST Bolt-in Roll Cage BMW Z3 Roadster V3 is a full roll cage for the BMW Z3 with 2-door Roadster bodywork. This Bolt-in Z3 Roadster V3 has everything the V2 offers and adds door bars.
The cage is designed and built by AST Roll Cages in Spain, for drivers who want side protection as well as protection from above in a car without a fixed roof.
Key benefits
- Door bars in the door that absorb energy in a side impact before it reaches the seat.
- Front reinforcement bars to the bulkhead are retained, so the structure extends right to the front of the car.
- Six bolting points on six 3 mm steel foot plates welded to the bodyshell.
- Fully fledged competition build without having to go straight to the heaviest specification.
- E355 steel with a 45 mm main hoop and remaining tubes of 40 mm.
- Scanned for each car and designed in 3D, so that the door bars do not touch the door card.
- Supplied unpainted in sections, to be joined with the connecting sleeves provided.
Suitable for
BMW Z3 (E37), 2-door Roadster
- BMW Z3 Roadster, the open two-seater built from 1995 to 2002
- Type: full roll cage, version V3
- Drifting, track use and rallying
- Not suitable for the BMW Z3 Coupé. AST does not offer a roll cage for the closed Z3 Coupé; this cage is designed around the open body of the Roadster and does not fit the coupé.
Technical specifications
- Manufacturer: AST Roll Cages
- Manufacturer part number: CMBN05121
- Rear anchorage: in the rear suspension area
- Rear structure layout: V design
- Roof compatibility: suitable for the original hardtop
- Type: full roll cage, bolted to foot plates welded to the bodyshell
- Main hoop: E355 steel, 45 mm diameter
- Secondary structure: E355 steel, 40 mm diameter
- Foot plates: 3 mm steel, custom-designed for each car
- Mounting: 6 bolting points on 6 foot plates welded to the bodyshell
- Weight: 210 kg (manufacturer’s figure)
- Finish: welded and unpainted, split into sections via connecting sleeves
- Included: welded structure, connecting sleeves, reinforcement plates, bolts, washers and nuts, documentation, fitting instructions and sticker set
Fitting and delivery
The cage is built to order; the standard delivery time is 15 to 35 working days. The foot plates are welded to the bodyshell and the cage is bolted onto them. The door bars noticeably change how you get in and out, so adjust your seating position and harness mounts accordingly.
With the addition of door bars, the V3 is the first Z3 version that also gives you genuine protection from the side.
Why choose this Bolt-in Z3 Roadster V3 roll cage?
In an open two-seater you sit low and close to the door, so side protection matters more than in a saloon. AST digitises the bodyshell with laser scanners and designs the cage in 3D, so the door bars make the most of the available space without leaving you boxed in. The cage is intended for track and competition use; always check the regulations of your own organiser.
Frequently asked questions
Can I still get in and out normally with door bars?
Getting in is different from getting into a car with a standard interior, but remains perfectly manageable. The Bolt-in Z3 Roadster V3 has door bars that run close alongside the door; in an open roadster you can usually just step over the bar, as there is no roof edge in the way.
Does this roll cage also fit a BMW Z3 Coupé?
No. AST does not offer a roll cage for the Z3 Coupé. This cage is designed around the open body of the Roadster and does not fit the closed coupé.
What is the delivery time?
The standard delivery time for this roll cage is 15 to 35 working days.
Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.








Reviews
There are no reviews yet.