Description
AST Multipoint Weld-in Roll Cage Nissan Silvia PS13 Coupé V4 NASCAR door
The AST Multipoint Weld-in Roll Cage Nissan Silvia PS13 Coupé V4 NASCAR Door Bars is the heaviest roll cage AST designs for the two-door Nissan Silvia PS13. This Multipoint PS13 V4 NASCAR combines ten welded mounting points with the full V4 tubing and several curved tubes in the door, and is designated by the manufacturer as a drift version.
It has everything: the wider load distribution of a multipoint cage, the extra diagonal brace and harness bar of the V4, and the side protection of NASCAR door bars. At 72 kg, it is also the heaviest package in the range.
Key benefits
- Ten welded mounting points: the widest load distribution AST offers for this model.
- NASCAR door bars: several curved tubes reaching deep into the door for maximum side protection.
- Specification level V4: door bars plus an extra diagonal brace and harness bar.
- Designated by AST as a drift version: designed specifically for drift use.
- E355 steel: main hoop with a diameter of 45 mm, the rest of the structure 40 mm.
- Custom reinforcement plates: 3 mm thick steel, designed for each specific car rather than as a universal part.
- Exact fit: the bodyshell is digitised with laser scanners before the cage is designed in 3D.
- Complete weld-in kit: includes gussets, mounting hardware, documentation, fitting instructions, a sticker set and a T-joint weld sample.
Suitable for
Nissan Silvia PS13, 2-door coupé
- Nissan Silvia PS13 Coupé, also known as the 240SX coupé
- Type: full roll cage, multipoint weld-in, version V4 with NASCAR door bars
- Drifting first and foremost, as well as track and competition
This is a cage for a car that does nothing but compete. AST designs separate cages for the two-door PS13 coupé and the three-door S13 hatchback; this one fits the coupé.
Technical specifications
- Manufacturer: AST Roll Cages
- Manufacturer part number: CMBN03633
- Sunroof: for roofs without a sunroof
- Headlining: for roofs without headlining
- Rear anchorage: in the rear suspension area
- Rear structure layout: V design
- Type: full roll cage, permanently welded in, multipoint, with NASCAR door bars
- Main hoop: E355 steel, 45 mm diameter
- Secondary structure: E355 steel, 40 mm diameter
- Reinforcement plates: 3 mm steel, custom-designed for each car
- Mounting: 10 welded mounting points on the bodyshell
- Weight: 210 kg (manufacturer’s figure)
- Finish: supplied as a weld-in kit, unpainted
- Included: weld-in kit, gussets, reinforcement plates, bolts, washers and nuts, documentation, fitting instructions, sticker set and a T-joint weld sample
Fitting and delivery
The cage is built to order; the standard delivery time is 15 to 35 working days. This is the most labour-intensive installation in the entire PS13 range: ten welded mounting points, the full V4 tubework and door bars that have to be fitted into the door. The interior must be completely stripped and the doors opened up before anything will fit. Measure beforehand to check that there is still enough room for your seating position and helmet. Have the welding done by someone with roll cage experience. This cage is intended for track and competition use; check the regulations of your own sporting body beforehand, as not every class allows NASCAR door bars.
Ten welded mounting points, the full V4 tubework and NASCAR door bars: AST goes no further than this for the PS13 coupé.
Why choose this Multipoint PS13 V4 NASCAR?
If the car is purely for competition, there is little point in saving money on the cage. This version leaves nothing out: the loads are spread over ten points, the structure is carried through completely and the side is closed off with multiple tubes. You won’t need to weld anything on later, and in the end that saves more than the price difference with a lighter version.
Frequently asked questions
What is the difference from the multipoint V3 NASCAR?
The Multipoint PS13 V4 NASCAR has an extra diagonal brace and harness bar. The weight rises from 65 to 72 kg. The number of welded mounting points remains ten.
What is the difference from the weld-in V5 NASCAR?
The number of welded mounting points: ten instead of eight. The tubework also differs, as the V5 has the complete set of bars, whereas this one has door bars plus an extra diagonal brace and harness bar.
Does this cage also fit the three-door S13 hatchback?
No. AST designs a separate range for the hatchback. This cage is made for the two-door coupé.
Can this cage be removed later?
No, it is permanently welded to the bodyshell. For a removable solution, look at the half cage or the bolt-in range.
What is the delivery time?
The standard delivery time for this roll cage is 15 to 35 working days, as AST builds every cage to order.
Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.








Reviews
There are no reviews yet.