AST Weld-in Roll Cage Nissan Silvia S15 Coupé V2

€970,21 Incl. VAT

AST Weld-in Roll Cage Nissan Silvia S15 Coupé V2

This Weld-in S15 Coupé V2 is a full roll cage from AST Roll Cages for the two-door Nissan Silvia S15, welded in at eight points and extended with front reinforcement bars to the bulkhead.

X design rear structure. E355 steel, 45 mm main hoop, 40 mm for the other tubes, supplied as an unpainted weld-in kit.

Delivery time 15 to 35 working days.

Available on back-order|Estimated delivery time: 15 tot 35 werkdagen

SKU: CMBN04650 Category: Brand:

Description

AST Weld-in Roll Cage Nissan Silvia S15 Coupé V2

The Weld-in S15 Coupé V2 is a full roll cage from AST Roll Cages for the two-door Nissan Silvia S15, permanently welded to the bodyshell at eight points.

Compared with the V1, two front reinforcement bars are added, running from the A-pillar to the bulkhead. In a welded-in construction this addition works especially well, because there is no bolted joint anywhere in between that first has to absorb the forces. The front end and the rear axle are thus connected by one continuous steel structure.

The rear structure has an X design. The cage is supplied unpainted.

Key benefits

  • Front reinforcement bars to the bulkhead, the difference from the V1
  • X design rear structure
  • Eight welded mounting points, permanently joined to the bodyshell
  • Continuous structure from the front axle to the rear suspension
  • E355 steel, 45 mm main hoop and 40 mm for the remaining tubes
  • Gussets made from 3 mm steel at the welded mounting points
  • Custom-made via laser scan of the original bodyshell

Suitable for

Nissan Silvia S15, two-door Coupé

  • S15 Spec-R and Spec-S, rear-wheel drive
  • Roofs without a sunroof
  • Roofs without headlining
  • Circuit driving, drifting and track days

Technical specifications

  • Manufacturer: AST Roll Cages
  • Part number: CMBN04650
  • Material: E355 steel
  • Main hoop tube diameter: 45 mm
  • Secondary structure tube diameter: 40 mm
  • Foot and reinforcement plates: 3 mm steel, custom-made for each car
  • Mounting: 8 welded mounting points on the bodyshell
  • Weight: 210 kg
  • Finish: unpainted
  • Sunroof: for roofs without a sunroof
  • Headlining: for roofs without headlining
  • Rear anchorage: in the rear suspension area
  • Rear structure layout: X design
  • Included: weld-in kit, gussets, reinforcement plates, bolts, washers, nuts, documentation, fitting instructions and sticker set

Fitting and delivery

The car is stripped before any welding takes place. Take the welded mounting points back to bare steel and, with the front bars, watch the space along the dashboard, where the wiring loom and heater box are located. Plan that routing before you start welding, because corrections here take the most time.

Every cage is custom-built after you order, with a delivery time of 15 to 35 working days.

From bulkhead to rear axle in one continuous, welded-in structure.

Why choose this Weld-in S15 Coupé V2?

A cage anchored only at the rear still leaves the front of the car to do its own thing. By extending the bars to the bulkhead and welding everything in place, you get an S15 that responds to steering corrections as a single unit. On a circuit with fast changes of direction you notice this immediately, and in the long run it reduces fatigue in the panelwork around the strut towers.

Frequently asked questions

Is this a half or a full roll cage?

A full roll cage, welded at eight points and extending into the front compartment.

What does V2 add compared with V1?

The Weld-in S15 Coupé V2 has two front reinforcement bars that run to the bulkhead. The V1 does not have these.

Can I remove this cage later?

Not without grinding. A weld-in cage is permanent.

How much does this roll cage weigh?

According to AST Roll Cages, this item weighs 45 kg.

Is this roll cage homologated?

AST does not list an FIA homologation number for this item. Assume track and competition use, and check the regulations of your own organiser.

Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.

Additional information

Weight210 kg
Car make

Nissan

Model

Reviews

There are no reviews yet.

Be the first to review “AST Weld-in Roll Cage Nissan Silvia S15 Coupé V2”
EN

Your Shopping cart

Close