Shop

Description

Opel Corsa E V-Maxx Big Brake Kit 330 mm 4-piston (PCD 4×100)

This big brake kit Corsa E is a V-Maxx brake kit for the front axle of the Opel Corsa E with PCD 4×100. The kit contains 4-piston calipers made of forged aluminium, 330 mm two-piece brake discs with ultralight floating aluminium bells, V-Maxx sport brake pads and the vehicle-specific adapters.

The kit fits the Corsa E from 51 to 152 kW and the Corsa E Van from 51 to 70 kW. If you use the Corsa E for track days or drive it in a sporty way on the road, the braking performance stays stable under repeated hard braking, because the aluminium parts and the directional cooling channels in the discs dissipate heat quickly. The Dutch manufacturer V-Maxx Autosport gives a 2-year warranty, and thanks to the TÜV certificate according to §19.3, the kit is approved for use on public roads.

Key benefits

• Suitable up to 152 kW: all Corsa E versions with PCD 4×100
• Also for the Corsa E Van from 51 to 70 kW
• Two-piece 330 mm discs, grooved, with directional cooling channels
• Calipers made of forged aluminium, four pistons per caliper, red (RAL 3020) as standard
• Fast cooling: aluminium conducts heat about 5 times better than steel
• TÜV §19.3 for public roads
• V-Maxx sport brake pads with TÜV approval and adapters included in the delivery

Suitable for

Opel Corsa E and Corsa E Van from 09-2014, PCD 4×100

• Opel Corsa E (S-D), from 09-2014: all versions from 51 to 152 kW
• Opel Corsa E Van (S-D), from 09-2014: all versions from 51 to 70 kW
• Only for cars with PCD 4×100

Minimum wheel size: 17 inch. Always check with the fitment template (WFC) whether your wheel has enough clearance; a wheel spacer is sometimes required.

Technical specifications

• Manufacturer: V-Maxx Autosport (Netherlands)
• Part number: 20 OP330 07
• Brake discs: 330 mm, two-piece, grooved, high-carbon steel on a floating aluminium bell
• Calipers: 4-piston, forged aluminium, red (RAL 3020) as standard
• Brake pads: V-Maxx sport brake pads with TÜV approval
• Minimum wheel size: 17 inch
• Approval: TÜV §19.3
• Axle: front axle
• Included: calipers, brake discs with bells, brake pads, vehicle-specific adapters, fitting hardware and fitting instructions

Fitting and delivery

Follow the V-Maxx fitting instructions supplied with the kit, and use the tightening torques stated in them. The kit is only suitable for a Corsa E with original steering knuckles. Clean the brake kit with a mild soap, as wheel cleaner attacks the aluminium. If you drive a lot and hard on the track, remove the dust seals from the calipers as V-Maxx advises.

You can extend the kit with a different caliper colour (black, blue or yellow, at extra cost), V-Maxx Steelflex steel braided brake hoses for the front axle (460 mm, set of 2, PTFE inner hose and TÜV approval), 500 ml of Ferodo brake fluid, a V-Maxx wear indicator set and an extra set of Ferodo FDSR216 DS Performance brake pads; these have no TÜV approval. Delivery time: 4 to 7 days.

A Corsa E with 330 mm discs not only brakes harder, but above all stays consistent for longer: that is where this V-Maxx kit makes the difference.

Why choose this big brake kit Corsa E?

Under repeated hard braking, cooling determines how long a brake system stays consistent. The big brake kit Corsa E is designed for exactly that: the caliper, bracket and bell are made of aluminium and the discs have directional cooling channels, so the kit cools down much faster. The kit comes complete, connects to the original brake hoses via the adapters and, with TÜV §19.3, is approved for use on public roads.

Frequently asked questions

Which version do I need for my Corsa E?

That is determined by the PCD of your car. This kit (20 OP330 07) is for the Corsa E with PCD 4×100. If your Corsa E has PCD 5×110, choose V-Maxx kit 20 OP330 04, also with 330 mm discs.

Is the big brake kit Corsa E suitable for a car with more power than standard?

Yes, definitely. A Corsa E with more power than standard benefits most from this kit: 330 mm discs and 4-piston calipers give more braking power and much less fade. The kW limits in the application list refer to the original factory output, and with an officially approved power upgrade the TÜV approval remains valid.

Does the big brake kit Corsa E fit behind my wheels?

The big brake kit Corsa E requires wheels of at least 17 inch. Check with the fitment template (WFC) whether the wheel clears the caliper; in some cases a wheel spacer is required.

Is there a V-Maxx kit for the rear axle of the Corsa E?

No. V-Maxx only makes kits for the front axle, which delivers around 90% of the braking power.

What is the delivery time?

The delivery time is 4 to 7 days.

Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.