Description
Seat Toledo 1L V-Maxx Big Brake Kit 290 mm 4-piston including knuckles
This big brake kit Toledo 1L with knuckles from V-Maxx is a complete performance brake kit for the front axle of the Seat Toledo 1L, supplied including new steering knuckles, wheel bearings and wheel hubs.
This version, recognisable by +AD in the part number, is intended for cars on which the original steering knuckle is not suitable. In addition to the new steering knuckles, wheel bearings and wheel hubs, the kit consists of 290 mm two-piece brake discs and 4-piston calipers made of forged aluminium. The caliper, the bracket and the disc bell are made of aluminium, which conducts heat about five times better than steel. As a result, the kit cools down much faster and keeps braking consistently under repeated hard braking.
V-Maxx Autosport from the Netherlands supplies the kit ready to fit with sport brake pads with TÜV approval and vehicle-specific adapters for the original rubber brake hoses. With the TÜV certificate according to §19.3, the kit is approved for use on public roads.
Key benefits
- Including new steering knuckles, wheel bearings and wheel hubs
- 290 mm brake discs: two-piece, grooved, made of high-carbon steel
- 4-piston calipers made of forged aluminium
- Floating aluminium disc bells that are ultra-light
- Much less fade thanks to the fast heat dissipation of aluminium
- Ready to fit with V-Maxx sport brake pads with TÜV approval and adapters
- TÜV §19.3: approved for use on public roads
- 2-year warranty from V-Maxx Autosport in the Netherlands
Suitable for
Seat Toledo 1L (January 1991 to October 1999), 47 to 110 kW, including steering knuckles
- Seat Toledo (1L), January 1991 to October 1999: all versions from 47 to 110 kW with original rear disc brakes. PCD 4×100 only, not for cars with ESP. This kit is supplied including new steering knuckles, wheel bearings and wheel hubs.
- Seat Toledo (1L), January 1991 to October 1999: all versions from 47 to 110 kW with original rear drum brakes. PCD 4×100 only, not for cars with ESP. This kit is supplied including new steering knuckles, wheel bearings and wheel hubs.
Minimum wheel size: 15 inch. Check with the fitment template (WFC, Wheel Fitment Chart) whether the caliper runs freely inside the wheel; a wheel spacer is sometimes required.
Technical specifications
- Manufacturer: V-Maxx Autosport (Netherlands)
- Part number: 20 SE290 03+AD
- Brake discs: 290 mm, two-piece, grooved, high-carbon steel with floating aluminium bell
- Calipers: 4-piston, forged aluminium
- Brake pads: V-Maxx sport brake pads with TÜV approval
- Minimum wheel size: 15 inch
- Approval: TÜV §19.3
- Axle: front axle
- Included: calipers, brake discs with bells, brake pads, new steering knuckles, wheel bearings and wheel hubs, vehicle-specific adapters and fitting hardware
Fitting and delivery
Fit the big brake kit Toledo 1L with knuckles according to the V-Maxx fitting instructions supplied. This version is supplied including new steering knuckles, wheel bearings and wheel hubs, so it also fits cars on which the original knuckle is not suitable. Check beforehand which knuckle is fitted to the car: if the original knuckle is suitable, kit 20 SE290 03 without knuckles is sufficient. Do not use wheel cleaner, as it attacks the aluminium; mild soap is sufficient. For heavy track use, V-Maxx recommends removing the dust seals from the calipers.
As an option, we supply V-Maxx Steelflex steel braided brake hoses for the front axle (370 mm, set of 2) with PTFE inner hose and TÜV approval, Ferodo Super Formula brake fluid (500 ml) and a V-Maxx wear indicator set. Delivery time: 2 to 4 working days.
Steering knuckles, wheel bearings, wheel hubs and a complete brake kit in one delivery: with this V-Maxx version you renew everything around the front brakes of the Toledo 1L in one go.
Why choose this big brake kit Toledo 1L with knuckles?
Because this kit also replaces the steering knuckles, wheel bearings and wheel hubs, you do not depend on the version of the original knuckle. You get 290 mm two-piece discs on floating aluminium bells and 4-piston calipers made of forged aluminium, which dissipate heat quickly and keep working consistently under repeated hard braking. The kit is TÜV approved, is supplied complete with sport brake pads and adapters and comes with a 2-year warranty.
Frequently asked questions
What is the difference from the kit without knuckles?
Kit 20 SE290 03 is for cars with a suitable original steering knuckle. This version with +AD in the part number is supplied including new steering knuckles, wheel bearings and wheel hubs, for cars on which the original knuckle is not suitable. In both cases, the brake discs and calipers are 290 mm and 4-piston.
Does the big brake kit Toledo 1L with knuckles fit behind my wheels?
The big brake kit Toledo 1L with knuckles requires wheels of at least 15 inch. Check beforehand with the fitment template (WFC) whether there is enough clearance; a wheel spacer is sometimes required.
Is it normal for the brake pads to click?
Yes. V-Maxx deliberately gives the pads 1 to 1.5 mm of play so they do not seize at high temperatures. As a result, you hear a short click when you change between driving forwards and reversing.
Can I use this kit on public roads?
Yes. The kit has a TÜV certificate according to §19.3 and is therefore approved for use on public roads, also with an officially approved power upgrade. The kW limits in the application list refer to the original output.
What is the delivery time?
The delivery time is 2 to 4 working days.
Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.





Reviews
There are no reviews yet.