Volkswagen Scirocco 3 / Beetle 5C (08-19) MTS Technik Street coilover kit Gold (multilink rear axle)

€495,04 Incl. VAT

The MTS Street Scirocco 3 Gold is a height-adjustable coilover kit with zinc-plated damper bodies for the Volkswagen Scirocco 3 / Beetle 5C.

  • Lowers 25 to 50 mm at the front and 25 to 50 mm at the rear
  • Eibach springs, TÜV certificate and 2 years warranty with no mileage limit
  • Delivery time 4 to 7 working days while manufacturer stock lasts

Also available in another versionClick a kit to view it.

●Goldzinc-plated steelStreetall-roundStancelower and stiffer
MTS Street Scirocco 3 Gold coilover kitMTS Stance Scirocco 3 Gold coilover kit
Lowering F/R (mm)25‑50 / 25‑5025‑50 / 25‑50
Springs F/R (N/mm)32 / 27‑4580 / ‑
Price€599,00this kit€599,00View ›
●Inoxstainless steelStreetall-roundStancelower and stiffer
MTS Street Scirocco 3 Inox coilover kitMTS Stance Scirocco 3 Inox coilover kit
Lowering F/R (mm)25‑50 / 25‑5025‑50 / 25‑50
Springs F/R (N/mm)32 / 27‑4580 / ‑
Price€699,00View ›€699,00View ›

Available on back-order|Estimated delivery time: 4 to 7 working days

SKU: MTSGWVW36 Category: Brand:

Description

The MTS Street Scirocco 3 Gold is a height-adjustable coilover kit from MTS Technik for the Volkswagen Scirocco 3 / Beetle 5C, model years 2008 to 2019. Street is the standard setup from MTS Technik: a good balance between comfort and firmness, for daily use and the occasional track day or drift day.

On the Gold version, the steel parts have a yellow zinc coating and the aluminium parts are black anodised.

Key benefits

  • Zinc-plated damper bodies with a yellow zinc coating to protect against rust
  • Lower by 25 to 50 mm, front and rear independently adjustable
  • Eibach springs of 32 N/mm front and 27 to 45 N/mm rear
  • Gas-oil twin-tube dampers that stay stable even under intensive use
  • hexaCOIL spring perch: the adjusting nut does not seize up during adjustment
  • TÜV certificate and 2 year warranty with no mileage limit

Suitable for

The MTS Street Scirocco 3 Gold fits the following versions:

  • Volkswagen Scirocco 3 (type 137/138, 05/2008 to 12/2018): 1.4 TSI, 2.0 R, 2.0 TDI, 2.0 TFSI, 2.0 TSI
  • Volkswagen Beetle 5C (also Cabrio, type 5C1/5C2/5C7/5C8, 04/2011 to 07/2019): 1.2 TSI, 1.2 TSI 16V, 1.4 TSI, 1.6 TDI, 2.0 TDI, 2.0 TFSI, 2.0 TSI, 2.5

Note for the MTS Street Scirocco 3 Gold: only for cars with a multilink rear axle. Axle load: maximum 1090 kg front and maximum 880 kg rear; check your car’s vehicle type plate.

If the car has Audi Magnetic Ride (AMR), that system must be disabled. A suitable module for this is only available on request.

Technical specifications

  • Product: MTS Street Scirocco 3 Gold
  • Manufacturer: MTS Technik
  • Article number: MTSGWVW36
  • EAN: 5903357786502
  • Version: Street, Gold (zinc-plated steel)
  • Lowering: front 25 to 50 mm, rear 25 to 50 mm
  • Springs (Eibach): GWFE22VA with 32 N/mm front, GWFE38HA with 27 to 45 N/mm rear
  • Height adjustment: front via threaded damper body, rear via separate adjuster element
  • Thread block rear: at the top
  • Rear axle: multilink
  • Camber plates: not included
  • Included: complete front and rear set with springs and height adjustment
  • TÜV certificate: yes
  • Weight: 24.9 kg
  • Warranty: 2 years with no mileage limit

Fitting and delivery

The MTS Street Scirocco 3 Gold replaces the original dampers and springs and fits on the original mounting points.

  • The stated lowering applies relative to the standard suspension. If the car has a factory sport suspension, the lowering will be smaller.
  • When fitting, check the clearance between tyre or wheel and the strut: at least 5 mm. If it is less, use approved wheel spacers.
  • Sometimes the rear height adjuster has to be removed to achieve the maximum lowering.
  • Tip for adjusting the rear: remove the height adjuster, set the spring seat to the new position and refit the adjuster.
  • After fitting the MTS Street Scirocco 3 Gold, have the wheel alignment checked, because camber and toe change as well.

Delivery: 4 to 7 working days while manufacturer stock lasts.

The MTS Street Scirocco 3 Gold combines zinc-plated damper bodies, Eibach springs of 32 and 27-45 N/mm and up to 50 mm of lowering for the Volkswagen Scirocco 3 / Beetle 5C.

Why choose the MTS Street Scirocco 3 Gold?

With the MTS Street Scirocco 3 Gold you choose the setup MTS Technik itself recommends as standard: enough lowering for a tight stance, and a character that doesn’t become tiring on the road. The Gold version is the most affordable way to get an MTS Technik coilover kit, with a zinc coating that protects well against rust. If you also drive in winter, take a look at the Inox version with stainless steel damper bodies.

Frequently asked questions

What is the difference between Street and Stance?

All versions use the same dampers; the difference lies in the Eibach springs and the lowering range: Street (32 and 27-45 N/mm) and Stance (80 N/mm). Street is the standard. Stance is the firmest and the lowest.

What is the difference between Gold and Inox?

Gold has steel damper bodies with a yellow zinc coating, Inox has stainless steel damper bodies. Inox is more resistant to road salt and moisture and therefore costs more. Otherwise, the kits are identical.

How long does delivery take?

The MTS Street Scirocco 3 Gold is delivered within 4 to 7 working days as long as the manufacturer has stock.

Other MTS Technik sets for the Scirocco 3

Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.

Additional information

Weight25 kg
Car make

Volkswagen

Model

Beetle, Scirocco

Reviews

There are no reviews yet.

Be the first to review “Volkswagen Scirocco 3 / Beetle 5C (08-19) MTS Technik Street coilover kit Gold (multilink rear axle)”
EN

Your Shopping cart

Close