Shop

The MTS Street Vectra C Inox is a height-adjustable coilover kit from MTS Technik for the Opel Vectra C / Signum and Fiat Croma, model years 2002 to 2011. Street is the standard setup from MTS Technik: a good balance between comfort and firmness, for daily use and the occasional track day or drift day.

On the Inox version, the damper bodies are made of stainless steel, so road salt and moisture don’t stand a chance.

Key benefits

• Stainless steel damper bodies, resistant to road salt and moisture
• Lower by 30 to 65 mm, front and rear independently adjustable
• Eibach springs of 40.2 to 74.8 N/mm front
• Gas-oil twin-tube dampers that stay stable even under intensive use
• hexaCOIL spring perch: the adjusting nut does not seize up during adjustment
• TÜV certificate and 2 year warranty with no mileage limit

Suitable for

The MTS Street Vectra C Inox fits the following versions:

• Opel Vectra C (also GTS and Estate, type Z02, 04/2002 to 12/2010): 1.6 16V, 1.6, 1.8 16V, 1.8, 1.9 CDTI, 2.0 16V Turbo, 2.0 DTI 16V, 2.2 16V, 2.2 DGi, 2.2 DTI 16V, 2.8 V6 Turbo, 2.8 V6 Turbo OPC, 3.0 CDTi, 3.2 V6, 2.0 DTI, 2.0 Turbo, 2.2 direct, 2.2 DTI, 3.0 V6 CDTI
• Opel Signum Hatchback (type Z03, 05/2003 to 12/2008): 1.8, 1.9 CDTI, 2.0 DTI, 2.0 Turbo, 2.2 direct, 2.2 DTI, 2.8 V6 Turbo, 3.0 V6 CDTI, 3.2 V6
• Fiat Croma (type 194, 06/2005 to 12/2011): 1.8 16V, 1.9 D Multijet, 2.2 16V, 2.4 D Multijet

Note for the MTS Street Vectra C Inox: only for cars without electronically controlled damping. Axle load: maximum 1230 kg front and maximum 1165 kg rear; check your car’s vehicle type plate.

Technical specifications

• Product: MTS Street Vectra C Inox
• Manufacturer: MTS Technik
• Article number: XMTSGWOP18
• EAN: 5903855652552
• Version: Street, Inox (stainless steel)
• Lowering: front 30 to 65 mm, rear 35 to 70 mm (depending on the model)
• Springs (Eibach): GWFE04HA with 40.2 to 74.8 N/mm front
• Height adjustment: front via threaded damper body, rear via separate adjuster element
• Thread block rear: at the top
• Camber plates: not included
• Included: complete front and rear set with springs and height adjustment
• TÜV certificate: yes
• Weight: 24.9 kg
• Warranty: 2 years with no mileage limit

Fitting and delivery

The MTS Street Vectra C Inox replaces the original dampers and springs and fits on the original mounting points.

• The stated lowering applies relative to the standard suspension. If the car has a factory sport suspension, the lowering will be smaller.
• When fitting, check the clearance between tyre or wheel and the strut: at least 5 mm. If it is less, use approved wheel spacers.
• Tip for adjusting the rear: remove the height adjuster, set the spring seat to the new position and refit the adjuster.
• After lowering, have the wheel alignment checked, because camber and toe change as well.

Delivery: 4 to 7 working days while manufacturer stock lasts.

The MTS Street Vectra C Inox combines stainless steel damper bodies, Eibach springs of 40.2-74.8 N/mm and up to 65 mm of lowering for the Opel Vectra C / Signum and Fiat Croma.

Why choose the MTS Street Vectra C Inox?

With the MTS Street Vectra C Inox you choose the setup MTS Technik itself recommends as standard: enough lowering for a tight stance, and a character that doesn’t become tiring on the road. If you also drive in winter or the car is parked outside, the Inox version pays for itself: stainless steel doesn’t rust, so the thread of the height adjustment doesn’t seize up. If you mainly drive in summer, the Gold version is a more affordable alternative.

Frequently asked questions

What is the difference between Gold and Inox?

Gold has steel damper bodies with a yellow zinc coating, Inox has stainless steel damper bodies. Inox is more resistant to road salt and moisture and therefore costs more. Otherwise, the kits are identical.

How long does delivery take?

The MTS Street Vectra C Inox is delivered within 4 to 7 working days as long as the manufacturer has stock.