Shop

The MTS Street i20 GB Gold is a height-adjustable coilover kit from MTS Technik for the Hyundai i20 GB, model years 2014 to 2021. Street is the standard setup from MTS Technik: a good balance between comfort and firmness, for daily use and the occasional track day or drift day.

On the Gold version, the steel parts have a yellow zinc coating and the aluminium parts are black anodised.

Key benefits

• Zinc-plated damper bodies with a yellow zinc coating to protect against rust
• Lower by 20 to 55 mm, front and rear independently adjustable
• Eibach springs of 40 N/mm front and 30 to 84 N/mm rear
• Gas-oil twin-tube dampers that stay stable even under intensive use
• hexaCOIL spring perch: the adjusting nut does not seize up during adjustment
• 2 year warranty with no mileage limit

Suitable for

The MTS Street i20 GB Gold fits the following versions:

• Hyundai i20 GB (type GB/IB, 11/2014 to 08/2021): 1.0 T-GDI, 1.1 CRDi, 1.2, 1.2 LPG, 1.4, 1.4 CRDi

Note: axle load: maximum 920 kg front and maximum 840 kg rear; check your car’s vehicle type plate.

Technical specifications

• Product: MTS Street i20 GB Gold
• Manufacturer: MTS Technik
• Article number: MTSGWHY01
• EAN: 5903855618398
• Version: Street, Gold (zinc-plated steel)
• Lowering: front 20 to 55 mm, rear 25 to 50 mm
• Springs (Eibach): GWFE187 with 40 N/mm front, GWFE37HA with 30 to 84 N/mm rear
• Helper springs: GWHE24 (5.66 N/mm)
• Height adjustment: front via threaded damper body, rear via separate adjuster element
• Thread block rear: at the bottom
• Camber plates: not included
• Included: complete front and rear set with springs and height adjustment
• TÜV certificate: no
• Weight: 24.9 kg
• Warranty: 2 years with no mileage limit

Fitting and delivery

The MTS Street i20 GB Gold replaces the original dampers and springs and fits on the original mounting points.

• The stated lowering applies relative to the standard suspension. If the car has a factory sport suspension, the lowering will be smaller.
• When fitting, check the clearance between tyre or wheel and the strut: at least 5 mm. If it is less, use approved wheel spacers.
• Tip for adjusting the rear: remove the height adjuster, set the spring seat to the new position and refit the adjuster.
• After lowering, have the wheel alignment checked, because camber and toe change as well.

Delivery: 4 to 7 working days while manufacturer stock lasts.

The MTS Street i20 GB Gold combines zinc-plated damper bodies, Eibach springs of 40 and 30-84 N/mm and up to 55 mm of lowering for the Hyundai i20 GB.

Why choose the MTS Street i20 GB Gold?

Street is the setup that MTS Technik itself recommends as the standard: enough lowering for a tight stance, and a character that doesn’t become tiring on the road. The Gold version is the most affordable way to get an MTS Technik coilover kit, with a zinc coating that protects well against rust. If you also drive in winter, take a look at the Inox version with stainless steel damper bodies.

Frequently asked questions

What is the difference between Gold and Inox?

Gold has steel damper bodies with a yellow zinc coating, Inox has stainless steel damper bodies. Inox is more resistant to road salt and moisture and therefore costs more. Otherwise, the kits are identical.

How long does delivery take?

The MTS Street i20 GB Gold is delivered within 4 to 7 working days as long as the manufacturer has stock.