Audi A4 B5 quattro (94-02) MTS Technik Stance coilover kit Gold (front axle load up to 1080 kg)

€536,36 Incl. VAT

The MTS Stance A4 B5 quattro Gold is a height-adjustable coilover kit with zinc-plated damper bodies for the Audi A4 B5 with four-wheel drive (quattro), not with electronically controlled damping.

  • Lowers 40 to 100 mm at the front and 20 to 80 mm at the rear
  • Eibach springs, TÜV certificate and 2 years warranty with no mileage limit
  • Delivery time 4 to 7 working days while manufacturer stock lasts

Also available in another versionClick a kit to view it.

●Goldzinc-plated steelComfortcomfortableStreetall-roundStancelower and stiffer
MTS Comfort A4 B5 quattro Gold coilover kitMTS Street A4 B5 quattro Gold coilover kitMTS Stance A4 B5 quattro Gold coilover kit
Lowering F/R (mm)40‑90 / 20‑8040‑100 / 20‑8040‑100 / 20‑80
Springs F/R (N/mm)102 / 40‑80122 / 40‑80150 / 40‑80
Price€649,00View ›€599,00View ›€649,00this kit
●Inoxstainless steelComfortcomfortableStreetall-roundStancelower and stiffer
MTS Comfort A4 B5 quattro Inox coilover kitMTS Street A4 B5 quattro Inox coilover kitMTS Stance A4 B5 quattro Inox coilover kit
Lowering F/R (mm)40‑90 / 20‑8040‑100 / 20‑8040‑100 / 20‑80
Springs F/R (N/mm)102 / 40‑80122 / 40‑80150 / 40‑80
Price€849,00View ›€799,00View ›€849,00View ›

Available on back-order|Estimated delivery time: 4 to 7 working days

SKU: MTSGWAU40-S Category: Brand:

Description

The MTS Stance A4 B5 quattro Gold is a height-adjustable coilover kit from MTS Technik for the Audi A4 B5 with four-wheel drive (quattro), model years 1994 to 2002. Stance is the lowest and firmest setup from MTS Technik, for those who want the wheel tight under the wheel arch.

On the Gold version, the steel parts have a yellow zinc coating and the aluminium parts are black anodised.

Key benefits

  • Zinc-plated damper bodies with a yellow zinc coating to protect against rust
  • Lower by 40 to 100 mm, front and rear independently adjustable
  • Eibach springs of 150 N/mm front and 40 to 80 N/mm rear
  • Gas-oil twin-tube dampers that stay stable even under intensive use
  • hexaCOIL spring perch: the adjusting nut does not seize up during adjustment
  • TÜV certificate and 2 year warranty with no mileage limit

Suitable for

The MTS Stance A4 B5 quattro Gold fits the following versions:

  • Audi A4 B5 (also Avant, type 8D2/8D5, 11/1994 to 12/2002): 1.8 quattro, 1.8 T quattro, 1.9 TDI quattro, 2.4 quattro, 2.5 TDI quattro, 2.6 quattro, 2.8 quattro, S4 quattro, RS4 quattro

Note for the MTS Stance A4 B5 quattro Gold: only for cars without electronically controlled damping. Axle load: maximum 1080 kg front and maximum 1140 kg rear; check your car’s vehicle type plate.

Technical specifications

  • Product: MTS Stance A4 B5 quattro Gold
  • Manufacturer: MTS Technik
  • Article number: MTSGWAU40-S
  • EAN: 5903855601871
  • Version: Stance, Gold (zinc-plated steel)
  • Lowering: front 40 to 100 mm, rear 20 to 80 mm
  • Springs (Eibach): GWFE24VA with 150 N/mm front, GWFE20HA with 40 to 80 N/mm rear
  • Helper springs: GWHE02 (20 N/mm)
  • Height adjustment: front and rear via threaded damper body
  • Camber plates: not included
  • Included: complete front and rear set with springs and height adjustment
  • TÜV certificate: yes
  • Weight: 24.9 kg
  • Warranty: 2 years with no mileage limit

Fitting and delivery

The MTS Stance A4 B5 quattro Gold replaces the original dampers and springs and fits on the original mounting points.

  • The stated lowering applies relative to the standard suspension. If the car has a factory sport suspension, the lowering will be smaller.
  • When fitting, check the clearance between tyre or wheel and the strut: at least 5 mm. If it is less, use approved wheel spacers.
  • After lowering, have the wheel alignment checked, because camber and toe change as well.

Delivery: 4 to 7 working days while manufacturer stock lasts.

The MTS Stance A4 B5 quattro Gold combines zinc-plated damper bodies, Eibach springs of 150 and 40-80 N/mm and up to 100 mm of lowering for the Audi A4 B5 with four-wheel drive (quattro).

Why choose the MTS Stance A4 B5 quattro Gold?

With the MTS Stance A4 B5 quattro Gold you choose the lowest possible car with direct, firm handling; the stiffer springs keep the body steady, even with a large lowering. The Gold version is the most affordable way to get an MTS Technik coilover kit, with a zinc coating that protects well against rust. If you also drive in winter, take a look at the Inox version with stainless steel damper bodies.

Frequently asked questions

Does this kit also fit a version without four-wheel drive?

No. The MTS Stance A4 B5 quattro Gold is made for the four-wheel-drive (quattro) versions. MTS Technik has separate kits for the front-wheel drive versions.

What is the difference between Comfort, Street and Stance?

All versions use the same dampers; the difference lies in the Eibach springs and the lowering range: Comfort (102 and 40-80 N/mm), Street (122 and 40-80 N/mm) and Stance (150 and 40-80 N/mm). Comfort is the softest. Street is the standard. Stance is the firmest and the lowest.

What is the difference between Gold and Inox?

Gold has steel damper bodies with a yellow zinc coating, Inox has stainless steel damper bodies. Inox is more resistant to road salt and moisture and therefore costs more. Otherwise, the kits are identical.

How long does delivery take?

The MTS Stance A4 B5 quattro Gold is delivered within 4 to 7 working days as long as the manufacturer has stock.

Other MTS Technik sets for the A4 B5

Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.

Additional information

Weight25 kg
Car make

Audi

Model

A4

Reviews

There are no reviews yet.

Be the first to review “Audi A4 B5 quattro (94-02) MTS Technik Stance coilover kit Gold (front axle load up to 1080 kg)”
EN

Your Shopping cart

Close