Shop

The MTS Stance A4 B5 quattro Inox is a height-adjustable coilover kit from MTS Technik for the Audi A4 B5 with four-wheel drive (quattro), model years 1994 to 2002. Stance is the lowest and firmest setup from MTS Technik, for those who want the wheel tight under the wheel arch.

On the Inox version, the damper bodies are made of stainless steel, so road salt and moisture don’t stand a chance.

Key benefits

• Stainless steel damper bodies, resistant to road salt and moisture
• Lower by 40 to 100 mm, front and rear independently adjustable
• Eibach springs of 200 N/mm front and 40 to 80 N/mm rear
• Gas-oil twin-tube dampers that stay stable even under intensive use
• hexaCOIL spring perch: the adjusting nut does not seize up during adjustment
• TÜV certificate and 2 year warranty with no mileage limit

Suitable for

The MTS Stance A4 B5 quattro Inox fits the following versions:

• Audi A4 B5 (also Avant, type 8D2/8D5, 11/1994 to 12/2002): 1.8 quattro, 1.8 T quattro, 1.9 TDI quattro, 2.4 quattro, 2.5 TDI quattro, 2.6 quattro, 2.8 quattro, S4 quattro, RS4 quattro

Note: only for cars without electronically controlled damping. Axle load: 1081 to 1150 kg front and maximum 1140 kg rear; check your car’s vehicle type plate.

Technical specifications

• Product: MTS Stance A4 B5 quattro Inox
• Manufacturer: MTS Technik
• Article number: XMTSGWAU41-S
• EAN: 5903855654914
• Version: Stance, Inox (stainless steel)
• Lowering: front 40 to 100 mm, rear 20 to 80 mm
• Springs (Eibach): GWFE275VA with 200 N/mm front, GWFE20HA with 40 to 80 N/mm rear
• Helper springs: GWHE02 (20 N/mm)
• Height adjustment: front and rear via threaded damper body
• Camber plates: not included
• Included: complete front and rear set with springs and height adjustment
• TÜV certificate: yes
• Weight: 24.9 kg
• Warranty: 2 years with no mileage limit

Fitting and delivery

The MTS Stance A4 B5 quattro Inox replaces the original dampers and springs and fits on the original mounting points.

• The stated lowering applies relative to the standard suspension. If the car has a factory sport suspension, the lowering will be smaller.
• When fitting, check the clearance between tyre or wheel and the strut: at least 5 mm. If it is less, use approved wheel spacers.
• After lowering, have the wheel alignment checked, because camber and toe change as well.

Delivery: 4 to 7 working days while manufacturer stock lasts.

The MTS Stance A4 B5 quattro Inox combines stainless steel damper bodies, Eibach springs of 200 and 40-80 N/mm and up to 100 mm of lowering for the Audi A4 B5 with four-wheel drive (quattro).

Why choose the MTS Stance A4 B5 quattro Inox?

With the MTS Stance A4 B5 quattro Inox you choose the lowest possible car with direct, firm handling; the stiffer springs keep the body steady, even with a large lowering. If you also drive in winter or the car is parked outside, the Inox version pays for itself: stainless steel doesn’t rust, so the thread of the height adjustment doesn’t seize up.

Frequently asked questions

Does this kit also fit a version without four-wheel drive?

No. The MTS Stance A4 B5 quattro Inox is made for the four-wheel-drive (quattro) versions. MTS Technik has separate kits for the front-wheel drive versions.

What is the difference between Comfort, Street and Stance?

All versions use the same dampers; the difference lies in the Eibach springs and the lowering range: Comfort (122 and 40-80 N/mm), Street (150 and 40-80 N/mm) and Stance (200 and 40-80 N/mm). Comfort is the softest. Street is the standard. Stance is the firmest and the lowest.

How long does delivery take?

The MTS Stance A4 B5 quattro Inox is delivered within 4 to 7 working days as long as the manufacturer has stock.

Other MTS Technik sets for the A4 B5

• Audi A4 B5 quattro (94-02) MTS Technik coilover kit (front axle up to 1080 kg)
• Audi A4 B5 (94-02) MTS Technik coilover kit (without quattro, front axle up to 1080 kg)
• Audi A4 B5 (94-02) MTS Technik coilover kit (without quattro, front axle 1081 to 1150 kg)