Shop

The MTS Street E24 E28 Gold is a height-adjustable weld-in insert kit (coilover) from MTS Technik for the BMW 5 Series (E28) and 6 Series (E24), model years 1981 to 1989. Street is the standard setup from MTS Technik: a good balance between comfort and firmness.

On the Gold version, the steel parts have a yellow zinc coating and the aluminium parts are black anodised. This is a weld-in insert kit: the original front struts are shortened and welded.

Key benefits

• Zinc-plated damper bodies with a yellow zinc coating to protect against rust
• Lower by 25 to 110 mm, front and rear independently adjustable
• Eibach springs of 70 N/mm front and 60 N/mm rear
• Gas-oil twin-tube dampers that stay stable even under intensive use
• hexaCOIL spring perch: the adjusting nut does not seize up during adjustment
• Front camber plates included, so you can adjust the camber
• 2 year warranty with no mileage limit

Suitable for

The MTS Street E24 E28 Gold fits the following versions:

• 5 Series E28 Sedan (05/1981 to 12/1987): 518, 518i, 520i, 524d, 524td, 525e, 525i, 528i, 535i
• 6 Series E24 (05/1982 to 04/1989): 628 CSi, 633 CSi, 635 CSi, M635 CSi

Note for the MTS Street E24 E28 Gold: axle load: maximum 980 kg front and maximum 1030 kg rear; check your car’s vehicle type plate.

Also suitable for versions with M-Technik (M package).

Technical specifications

• Product: MTS Street E24 E28 Gold
• Manufacturer: MTS Technik
• Article number: MTSGWBM32
• EAN: 5903357796792
• Version: Street, Gold (zinc-plated steel)
• Type of kit: weld-in insert kit, the original front struts are shortened and welded
• Lowering: front 25 to 110 mm, rear 25 to 90 mm
• Springs (Eibach): GWFE93 with 70 N/mm front, GWFE97 with 60 N/mm rear
• Helper springs: GWHE02 (20 N/mm)
• Height adjustment: front and rear via threaded damper body
• Front ride height: adjustable independently via the lower damper mounts
• Damper body for: diameter 52 mm
• Camber plates: included at the front
• Included: complete front and rear set with springs and height adjustment, plus front camber plates
• TÜV certificate: no
• Weight: 29.9 kg
• Warranty: 2 years with no mileage limit

Fitting and delivery

To fit the MTS Street E24 E28 Gold, the original front struts are shortened and welded as described in the manual. Have this done by an experienced mechanic or welder.

• The stated lowering applies relative to the standard suspension. If the car has a factory sport suspension, the lowering will be smaller.
• When fitting, check the clearance between tyre or wheel and the strut: at least 5 mm. If it is less, use approved wheel spacers.
• Sometimes extra original parts are needed for fitting; these are not included in the set.
• Only fits with a rear top mount with an inner diameter of 78 mm (OE 33521117657 or 33521126987). If the car has different top mounts, original top mounts with one of these numbers are required.
• On cars with level control (NIVO), the rear top mounts must be replaced with OE 33521117657 or 33521126987.
• After fitting the MTS Street E24 E28 Gold, have the wheel alignment checked, because camber and toe change as well.

Delivery: 4 to 7 working days while manufacturer stock lasts.

The MTS Street E24 E28 Gold combines zinc-plated damper bodies, Eibach springs of 70 and 60 N/mm and up to 110 mm of lowering for the BMW 5 Series (E28) and 6 Series (E24).

Why choose the MTS Street E24 E28 Gold?

With the MTS Street E24 E28 Gold you choose the setup MTS Technik itself recommends as standard: enough lowering for a tight stance, and a character that doesn’t become tiring on the road. The Gold version is the most affordable way to get an MTS Technik coilover kit, with a zinc coating that protects well against rust. If you also drive in winter, take a look at the Inox version with stainless steel damper bodies. With the included camber plates you set the camber, which with a large lowering means less tyre wear and more grip.

Frequently asked questions

What is the difference between Street and Stance?

All versions use the same dampers; the difference lies in the Eibach springs and the lowering range: Street (70 and 60 N/mm) and Stance (80 and 70 N/mm). Street is the standard. Stance is the firmest and the lowest.

What is the difference between Gold and Inox?

Gold has steel damper bodies with a yellow zinc coating, Inox has stainless steel damper bodies. Inox is more resistant to road salt and moisture and therefore costs more. Otherwise, the kits are identical.

Do the struts really have to be welded?

Yes. With this weld-in insert kit, your original struts are shortened and welded as described in the manual. If you don’t want to weld yourself, check whether a send-in kit exists for your car: with that, MTS Technik does the welding.

How long does delivery take?

The MTS Street E24 E28 Gold is delivered within 4 to 7 working days as long as the manufacturer has stock.

Other MTS Technik sets for the E24/E28

• BMW E24/E28 (81-89) MTS Technik coilover kit (55 mm strut, front camber plates, weld-in insert kit)
• BMW E24 (75-82) MTS Technik coilover kit (front camber plates, weld-in insert kit)
• BMW E24/E28 (81-89) MTS Technik coilover kit (55 mm strut, front camber plates, send-in kit)
• BMW E24/E28 (81-89) MTS Technik coilover kit (52 mm strut, front camber plates, send-in kit)
• BMW E24 (75-82) MTS Technik coilover kit (front camber plates, send-in kit)