Description
The MTS Street A4 B8 Avant Gold is a height-adjustable coilover kit from MTS Technik for the Audi A4 B8 Avant / A6 C7 / Q5 8R / A4 Allroad B8, model years 2007 to 2019. Street is the standard setup from MTS Technik: a good balance between comfort and firmness, for daily use and the occasional track day or drift day.
On the Gold version, the steel parts have a yellow zinc coating and the aluminium parts are black anodised.
Key benefits of the MTS Street A4 B8 Avant Gold
- Zinc-plated damper bodies with a yellow zinc coating to protect against rust
- Lower by 5 to 80 mm, front and rear independently adjustable
- Eibach springs of 90 N/mm front and 28 to 55 N/mm rear
- Gas-oil twin-tube dampers that stay stable even under intensive use
- hexaCOIL spring perch: the adjusting nut does not seize up during adjustment
- TÜV certificate and 2 year warranty with no mileage limit
Suitable for
The MTS Street A4 B8 Avant Gold fits the following versions:
- Audi A4 B8 Avant (type 8K5, 11/2007 to 06/2017): 1.8 TFSI, 2.0 TDI, 2.0 TFSI, 2.0 TFSI flexible fuel, 2.7 TDI, 3.0 TDI, 3.2 FSI, 1.8 TFSI quattro, 2.0 TDI quattro, 2.0 TFSI flexible fuel quattro, 2.0 TFSI quattro, 3.0 TDI quattro, 3.0 TFSI quattro, 3.2 FSI quattro, S4 quattro
- Audi A6 C7 (also Avant, type 4G2/4GC/4G5/4GD, 11/2010 to 11/2019): 1.8 TFSI, 2.0 TDI, 2.0 TFSI, 2.0 TFSI Hybrid, 2.8 FSI, 3.0 TDI, 2.0 TDI quattro, 2.0 TFSI quattro, 2.8 FSI quattro, 3.0 TDI quattro, 3.0 TFSI quattro, 1.8 35 TFSI, 2.0 40 TFSI quattro
- Audi Q5 8R (type 8RB, 11/2008 to 04/2019): 2.0 TDI quattro, 2.0 TFSI Hybrid quattro, 2.0 TFSI quattro, 3.0 TDI quattro, 3.0 TFSI quattro, 3.2 FSI quattro, 2.0 TDI, SQ5 TDI quattro, SQ5 TFSI quattro
- Audi A4 Allroad B8 (type 8KH, 04/2009 to 06/2017): 2.0 TDI quattro, 2.0 TFSI quattro, 3.0 TDI quattro
Note for the MTS Street A4 B8 Avant Gold: only for cars without electronically controlled damping. Axle load: maximum 1220 kg front and maximum 1425 kg rear; check your car’s vehicle type plate.
Technical specifications
- Product: MTS Street A4 B8 Avant Gold
- Manufacturer: MTS Technik
- Article number: MTSGWAU21
- EAN: 5903357784430
- Version: Street, Gold (zinc-plated steel)
- Lowering: front 5 to 80 mm, rear 10 to 85 mm (depending on the model)
- Springs (Eibach): GWFE29VA with 90 N/mm front, GWFE55HA with 28 to 55 N/mm rear
- Helper springs: GWHE01 (20 N/mm)
- Height adjustment: front via threaded damper body, rear via separate adjuster element
- Thread block rear: at the top
- Camber plates: not included
- Included: complete front and rear set with springs and height adjustment
- TÜV certificate: yes
- Weight: 36.9 kg
- Warranty: 2 years with no mileage limit
Fitting and delivery
The MTS Street A4 B8 Avant Gold replaces the original dampers and springs and fits on the original mounting points.
- The stated lowering applies relative to the standard suspension. If the car has a factory sport suspension, the lowering will be smaller.
- When fitting, check the clearance between tyre or wheel and the strut: at least 5 mm. If it is less, use approved wheel spacers.
- Tip for adjusting the rear: remove the height adjuster, set the spring seat to the new position and refit the adjuster.
- After fitting the MTS Street A4 B8 Avant Gold, have the wheel alignment checked, because camber and toe change as well.
Delivery: 4 to 7 working days while manufacturer stock lasts.
The MTS Street A4 B8 Avant Gold combines zinc-plated damper bodies, Eibach springs of 90 and 28-55 N/mm and up to 80 mm of lowering for the Audi A4 B8 Avant / A6 C7 / Q5 8R / A4 Allroad B8.
Why choose the MTS Street A4 B8 Avant Gold?
With the MTS Street A4 B8 Avant Gold you choose the setup MTS Technik itself recommends as standard: enough lowering for a tight stance, and a character that doesn’t become tiring on the road. The Gold version is the most affordable way to get an MTS Technik coilover kit, with a zinc coating that protects well against rust. If you also drive in winter, take a look at the Inox version with stainless steel damper bodies.
Frequently asked questions
What is the difference between Gold and Inox?
Gold has steel damper bodies with a yellow zinc coating, Inox has stainless steel damper bodies. Inox is more resistant to road salt and moisture and therefore costs more. Otherwise, the kits are identical.
How long does delivery take?
The MTS Street A4 B8 Avant Gold is delivered within 4 to 7 working days as long as the manufacturer has stock.
Other MTS Technik sets for the A4 B8 Avant
Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.
EN
NL
FR
DE
Reviews
There are no reviews yet.