Audi A4 B6/B7 (00-10) MTS Technik Street coilover kit Inox (also Avant and Cabrio)

The MTS Street A4 B6 Inox is a height-adjustable coilover kit with stainless steel damper bodies for the Audi A4 B6/B7 (not with self-levelling or air suspension).

  • Lowers 15 to 65 mm at the front and 10 to 65 mm at the rear, depending on the model
  • Eibach springs, TÜV certificate and 2 years warranty with no mileage limit
  • Delivery time 4 to 7 working days while manufacturer stock lasts

Also available in another versionClick a kit to view it.

●Goldzinc-plated steelStreetall-round
MTS Street A4 B6 Gold coilover kit
Lowering F/R (mm)15‑65 / 10‑65
Springs F/R (N/mm)122 / 81
Price€599,00View ›
●Inoxstainless steelStreetall-round
MTS Street A4 B6 Inox coilover kit
Lowering F/R (mm)15‑65 / 10‑65
Springs F/R (N/mm)122 / 81
Price€749,00this kit
SKU: XMTSGWAU04 Category: Brand:

Description

The MTS Street A4 B6 Inox is a height-adjustable coilover kit from MTS Technik for the Audi A4 B6/B7, model years 2000 to 2010. Street is the standard setup from MTS Technik: a good balance between comfort and firmness, for daily use and the occasional track day or drift day.

On the Inox version, the damper bodies are made of stainless steel, so road salt and moisture don’t stand a chance.

Key benefits

  • Stainless steel damper bodies, resistant to road salt and moisture
  • Lower by 15 to 65 mm, front and rear independently adjustable
  • Eibach springs of 122 N/mm front and 81 N/mm rear
  • Gas-oil twin-tube dampers that stay stable even under intensive use
  • hexaCOIL spring perch: the adjusting nut does not seize up during adjustment
  • TÜV certificate and 2 year warranty with no mileage limit

Suitable for

The MTS Street A4 B6 Inox fits the following versions:

  • Audi A4 B6 (also Avant and Cabrio, type 8E5/8E2/8H7, 02/2000 to 12/2009): 1.6, 1.8 T, 1.9 TDI, 2.0, 2.0 FSI, 2.4, 2.5 TDI, 3.0, 1.8 T quattro, 1.9 TDI quattro, 2.5 TDI quattro, 3.0 quattro, S4 Quattro
  • Audi A4 B7 (also Cabrio and Avant, type 8HE/8EC/8ED, 01/2002 to 01/2010): 1.8 T, 2.0 TDI, 2.0 TFSI 16V, 2.7 TDI, 3.2 FSI, 2.0 TFSI quattro, 3.0 TDI quattro, 3.2 FSI quattro, RS4 quattro, 1.8 T quattro, 2.0 TDI quattro, 3.0 quattro, 1.6, 1.9 TDI, 2.0, 2.0 TDI 16V, 2.0 TFSI, 2.5 TDI, 3.0, S4 quattro

Note for the MTS Street A4 B6 Inox: only for cars without level control (NIVO) or factory air suspension. Axle load: 1081 to 1250 kg front and maximum 1165 kg rear; check your car’s vehicle type plate.

Technical specifications

  • Product: MTS Street A4 B6 Inox
  • Manufacturer: MTS Technik
  • Article number: XMTSGWAU04
  • EAN: 5903855630369
  • Version: Street, Inox (stainless steel)
  • Lowering: front 15 to 65 mm, rear 10 to 65 mm (depending on the model)
  • Springs (Eibach): GWFE10VA with 122 N/mm front, GWFE17HA with 81 N/mm rear
  • Helper springs: GWHE02 (20 N/mm)
  • Height adjustment: front via threaded damper body, rear via separate adjuster element
  • Camber plates: not included
  • Included: complete front and rear set with springs and height adjustment
  • TÜV certificate: yes
  • Weight: 24.9 kg
  • Warranty: 2 years with no mileage limit

Fitting and delivery

The MTS Street A4 B6 Inox replaces the original dampers and springs and fits on the original mounting points.

  • The stated lowering applies relative to the standard suspension. If the car has a factory sport suspension, the lowering will be smaller.
  • When fitting, check the clearance between tyre or wheel and the strut: at least 5 mm. If it is less, use approved wheel spacers.
  • Tip for adjusting the rear: remove the height adjuster, set the spring seat to the new position and refit the adjuster.
  • After lowering, have the wheel alignment checked, because camber and toe change as well.

Delivery: 4 to 7 working days while manufacturer stock lasts.

The MTS Street A4 B6 Inox combines stainless steel damper bodies, Eibach springs of 122 and 81 N/mm and up to 65 mm of lowering for the Audi A4 B6/B7.

Why choose the MTS Street A4 B6 Inox?

With the MTS Street A4 B6 Inox you choose the setup MTS Technik itself recommends as standard: enough lowering for a tight stance, and a character that doesn’t become tiring on the road. If you also drive in winter or the car is parked outside, the Inox version pays for itself: stainless steel doesn’t rust, so the thread of the height adjustment doesn’t seize up. If you mainly drive in summer, the Gold version is a more affordable alternative.

Frequently asked questions

What is the difference between Gold and Inox?

Gold has steel damper bodies with a yellow zinc coating, Inox has stainless steel damper bodies. Inox is more resistant to road salt and moisture and therefore costs more. Otherwise, the kits are identical.

How long does delivery take?

The MTS Street A4 B6 Inox is delivered within 4 to 7 working days as long as the manufacturer has stock.

Other MTS Technik sets for the A4 B6

Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.

Additional information

Weight25 kg
Car make

Audi

Model

A4

Reviews

There are no reviews yet.

Be the first to review “Audi A4 B6/B7 (00-10) MTS Technik Street coilover kit Inox (also Avant and Cabrio)”
EN

Your Shopping cart

Close