Adamat Mercedes M103/M104 basic adapter kit for Dodge ZF 8HP70/8HP90

€723,67 Incl. VAT

Adamat Mercedes M103/M104 basic adapter kit for Dodge ZF 8HP70/8HP90

Basic kit to connect a Mercedes M103 or M104 to the ZF 8HP70 or 8HP90 from the Dodge Challenger, Charger and Hellcat, using the original Mercedes flexplate. The set includes an AlZnMg+Ti converter adapter with centring shaft, a reducing ring for the converter shaft, a 15 mm AW7075-T651 adapter plate and the bolts; Adamat recommends a maximum of 700 Nm. When ordering, you choose whether the aluminium parts are anodised. Lead time 5 to 7 weeks, approx. 2 weeks longer with anodising.

Available on back-order|Estimated delivery time: 5 to 7 weeks

Optional anodised coating on the aluminium parts. This is done externally and adds about 2 weeks of lead time.

For example the model year or code of your 8HP, your chassis, a different engine tilt or anything else Adamat needs to take into account.

SKU: ADM-265 Category: Brand:

Description

Adamat Mercedes M103/M104 basic adapter kit for Dodge ZF 8HP70/8HP90

The M104 Dodge 8HP adapter kit from Adamat Performance connects a Mercedes M103 or M104 six-cylinder to the ZF 8HP70 or 8HP90 automatic from the Dodge Challenger, Charger and Hellcat. It is a basic kit that works with the original flexplate of the Mercedes engine. That flexplate is not included in the set.

The heart of the kit is a converter adapter made of AlZnMg+Ti, a light alloy with the strength of 42CrMo4 steel. The adapter weighs 2.4 kg and has a centring shaft that centres the torque converter of the 8HP directly in the crankshaft. A reducing ring for the torque converter shaft is included, because that dimension differs per model year of the 8HP.

Because the original Mercedes flexplate has limited strength, Adamat recommends staying below 700 Nm of engine torque.

Key advantages

  • Mercedes M103 or M104 on the Dodge 8HP: for the 8HP70 and 8HP90 from Challenger, Charger and Hellcat
  • Works with the original Mercedes flexplate, no special flywheel needed
  • 2.4 kg converter adapter made of AlZnMg+Ti, with the strength of 42CrMo4 steel
  • Centring shaft that seats the 8HP torque converter straight in the crankshaft
  • Reducing ring included for the converter shaft, depending on the model year of the gearbox
  • 15 mm AW7075-T651 adapter plate, according to Adamat stronger than S355 and C45 steel (1.0503)
  • Mounting bolts for flywheel, adapter and gearbox in the set
  • Installation manual as a PDF from Adamat

Suitable for

Engine: Mercedes M103 and M104

Gearbox: ZF 8HP70 and 8HP90 from the Dodge Challenger, Charger and Hellcat

Recommended maximum engine torque according to Adamat: 700 Nm, due to the original Mercedes flexplate.

Technical specifications

  • Manufacturer: Adamat Performance (Poland)
  • Article number: ADM-M104-8HPDODGE
  • Engine: Mercedes M103 and M104
  • Gearbox: ZF 8HP70 and 8HP90 (Dodge Challenger, Charger, Hellcat)
  • Converter adapter: AlZnMg+Ti, 2.4 kg, with centring shaft for the torque converter
  • Reducing ring: for the shaft of the 8HP torque converter, depending on the model year
  • Adapter plate: AW7075-T651 aluminium, 15 mm thick
  • Recommended maximum torque: 700 Nm (limitation of the original Mercedes flexplate)
  • Included: converter adapter, reducing ring, adapter plate and bolts for flywheel, adapter and gearbox
  • Not included: original Mercedes flexplate
  • Manual: installation manual as a PDF

Installation and delivery

The converter adapter is mounted on the crankshaft together with the original Mercedes flexplate, and the centring shaft ensures the 8HP torque converter sits exactly in the centre. The adapter plate connects the block to the bell housing. Use the reducing ring if the model year of your 8HP requires it; Adamat’s PDF manual describes the installation.

When ordering, you choose whether the aluminium parts are anodised. In the note field you can pass on, for example, the model year or code of your 8HP, your chassis or a different engine tilt. Adamat makes the kit to order. The lead time is 5 to 7 weeks, about 2 weeks longer with anodising.

A Mercedes six-cylinder paired with the eight-speed automatic of a Challenger or Charger, with the original flexplate and a converter adapter from Adamat.

Why choose this M104 Dodge 8HP adapter kit?

With this kit you put the ZF 8HP70 or 8HP90 from the Dodge models behind an M103 or M104. You reuse the original flexplate; Adamat supplies the adapter plate, the converter adapter with centring shaft and the reducing ring for the different model years. For projects up to 700 Nm this is a compact solution.

Frequently asked questions

Does the M104 Dodge 8HP adapter kit include a flexplate?

No, the M104 Dodge 8HP adapter kit is a basic kit for the original flexplate of the Mercedes engine. The set contains the adapter plate, the converter adapter, a reducing ring and the bolts.

How much torque can the kit handle?

Adamat recommends staying below 700 Nm. This is not due to the adapter itself, but to the limited strength of the original Mercedes flexplate.

What is the reducing ring for?

The shaft of the 8HP torque converter differs per model year. With the included reducing ring, the converter adapter fits your version.

What do I choose when ordering?

You choose whether the aluminium parts are anodised. In the note field you pass on, for example, the model year or code of your 8HP.

What is the lead time?

Adamat makes the kit to order: 5 to 7 weeks, about 2 weeks extra with anodising.

Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.

Additional information

Weight6 kg

Reviews

There are no reviews yet.

Be the first to review “Adamat Mercedes M103/M104 basic adapter kit for Dodge ZF 8HP70/8HP90”
EN

Your Shopping cart

Close