Adamat Pontiac 400 swap kit for Dodge Challenger/Charger/Hellcat ZF 8HP70/8HP90

€760,70 Incl. VAT

Adamat Pontiac 400 swap kit for Dodge Challenger/Charger/Hellcat ZF 8HP70/8HP90

Swap kit to connect a Pontiac 400 to the ZF 8HP70 or 8HP90 from the Dodge Challenger, Charger and Hellcat. The kit contains a one-piece AlZnMg+Ti flywheel (3.2 kg, up to 2000 Nm) with starter ring gear, a 24 mm AW7075-T651 adapter plate, an adapter ring for the torque converter shaft and all bolts. When ordering, you choose whether the aluminium parts are anodised. Lead time 5 to 7 weeks, approx. 2 weeks longer with anodising.

Available on back-order|Estimated delivery time: 5 to 7 weeks

Optional anodised layer on the aluminium parts. This is done externally and takes approximately 2 weeks extra lead time.

For example the year of manufacture of your 8HP (for the correct adapter ring), your chassis, a different engine tilt angle or anything else Adamat needs to take into account.

SKU: ADM-264 Category: Brand:

Description

Adamat Pontiac 400 swap kit for Dodge Challenger/Charger/Hellcat ZF 8HP70/8HP90

A classic Pontiac 400 with a modern eight-speed automatic: with this Pontiac 400 swap kit from Adamat Performance you mate the engine to the ZF 8HP70 or 8HP90 from the Dodge Challenger, Charger and Hellcat.

The kit is built around a one-piece flywheel made of AlZnMg+Ti. It weighs 3.2 kg, has an integrated starter ring gear and is designed for a maximum of 2000 Nm. This means you do not need an original automatic flywheel; according to Adamat, such a flywheel can only handle limited torque and often cracks above approximately 600 Nm.

The kit also contains a 24 mm AW7075-T651 aluminium adapter plate, an adapter ring for the torque converter shaft and all bolts for flywheel, adapter and gearbox.

Key benefits

  • Pontiac 400 on the Dodge 8HP: ZF 8HP70 and 8HP90 from the Challenger, Charger and Hellcat
  • One-piece 3.2 kg flywheel, made of AlZnMg+Ti with the strength of 42CrMo4 steel
  • Up to 2000 Nm according to Adamat’s design value
  • Integrated starter ring gear
  • 24 mm AW7075-T651 adapter plate, according to Adamat stronger than S355 and C45 steel (1.0503)
  • Adapter ring for the torque converter shaft, depending on the year of manufacture of the 8HP
  • Mounting bolts for flywheel, adapter and gearbox
  • Installation manual available as a PDF from Adamat

Suitable for

Engine: Pontiac 400 (listed by Adamat as “Chevy Pontiac 400”)

GearboxFrom
ZF 8HP70Dodge Challenger, Charger, Hellcat
ZF 8HP90Dodge Challenger, Charger, Hellcat

If you are unsure about your gearbox or engine version, please enter the code and the year of manufacture of the 8HP in the note field.

Technical specifications

  • Manufacturer: Adamat Performance (Poland)
  • Article number: ADM-PON-8HPDODGE
  • Engine: Pontiac 400
  • Gearbox: ZF 8HP70 and 8HP90 (Dodge)
  • Flywheel: one-piece, AlZnMg+Ti, 3.2 kg, designed for a maximum of 2000 Nm, with integrated starter ring gear
  • Adapter plate: AW7075-T651 aluminium, 24 mm thick
  • Adapter ring: for the torque converter shaft of the 8HP, depending on the year of manufacture
  • Included: flywheel, adapter plate, adapter ring, bolts for flywheel, adapter and gearbox
  • Manual: installation manual as a PDF

Installation and delivery

The flywheel mounts directly on the crankshaft of the Pontiac 400. The 24 mm adapter plate connects the block to the 8HP, and the adapter ring makes the torque converter shaft fit the flywheel. Which ring is needed depends on the year of manufacture of your gearbox.

When ordering, you choose whether the aluminium parts are anodised. Enter the year of manufacture of your 8HP in the note field, and optionally your chassis or a different engine tilt angle. Adamat makes the kit to order. Allow 5 to 7 weeks lead time, approximately 2 weeks longer with anodising.

Old school Pontiac power with eight gears: flywheel, adapter and adapter ring from Adamat in one kit.

Why choose this Pontiac 400 swap kit?

Adamat measures with an ATOS GOM 3D scanner and a FARO measuring arm, designs in SolidWorks and mills on DMG MORI CNC machines with a machining accuracy of 0.01 mm. As a result, engine and gearbox line up well. The adapter is made of AW7075-T651 (Fortal), according to Adamat almost three times stronger than the commonly used AW2017, and the flywheel is made of AlZnMg+Ti with added titanium.

Frequently asked questions

Which gearbox does the Pontiac 400 swap kit fit?

The Pontiac 400 swap kit is made for the ZF 8HP70 and 8HP90 from the Dodge Challenger, Charger and Hellcat.

What is the adapter ring for?

The adapter ring adapts the torque converter shaft to the flywheel. Which ring is needed depends on the year of manufacture of the 8HP. Please state that year in the note field.

What do I choose when ordering?

You choose whether the aluminium parts are anodised (externally, approximately 2 weeks extra). In the note field you enter the year of manufacture of your 8HP, and for example your chassis or a different engine tilt angle.

What is the lead time?

Adamat makes the kit to order: 5 to 7 weeks. With anodising, add approximately 2 weeks.

Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.

Additional information

Weight12 kg

Reviews

There are no reviews yet.

Be the first to review “Adamat Pontiac 400 swap kit for Dodge Challenger/Charger/Hellcat ZF 8HP70/8HP90”
EN

Your Shopping cart

Close