Adamat Honda S2000 F20/F22 swap kit for BMW ZF 8HP45/50/70/75

€634,54 Incl. VAT

Adamat Honda S2000 F20/F22 swap kit for BMW ZF 8HP45/50/70/75

Swap kit to connect a Honda S2000 F20 or F22 to a BMW ZF 8HP automatic: main flywheel made of AlZnMg+Ti (3.6 kg, up to 2000 Nm) with steel starter ring gear and direct centring of the converter, a 24.5 mm adapter plate made of AW7075-T651 aluminium and all bolts. When ordering, you choose whether the aluminium parts are anodised. Lead time 5 to 7 weeks.

Available on back-order|Estimated delivery time: 5 to 7 weeks

Optional anodised coating on the aluminium parts. This is done externally and adds about 2 weeks of lead time.

For example your chassis, engine code, a different engine tilt or anything else Adamat needs to take into account.

SKU: ADM-269 Category: Brand:

Description

Adamat Honda S2000 F20/F22 swap kit for BMW ZF 8HP45/50/70/75

The four-cylinder from the Honda S2000 behind an eight-speed automatic from BMW: with this S2000 8HP swap kit from Adamat Performance you connect an F20 or F22 to the ZF 8HP. The set contains a main flywheel, a 24.5 mm adapter plate and the bolts for flywheel, adapter and gearbox.

The flywheel is made of AlZnMg+Ti and weighs 3.6 kg in total. It has a steel starter ring gear for the starter motor, and the torque converter of the 8HP is centred directly in the flywheel. Adamat designed it for a torque of up to 2000 Nm.

When ordering, you choose whether the aluminium parts are anodised. Via the note field you can give Adamat further information about your swap.

Key advantages

  • Everything to connect engine and gearbox: main flywheel, adapter plate and bolts for flywheel, adapter and gearbox
  • Light 3.6 kg flywheel made of AlZnMg+Ti, with the strength of 42CrMo4 steel
  • Designed for 2000 Nm, with room for an F20 or F22 with more horsepower than stock
  • Converter centred directly in the flywheel
  • Steel starter ring gear on the main flywheel
  • 24.5 mm adapter plate made of AW7075-T651 aluminium, stronger than S355 and C45 steel
  • Six ZF 8HP gearboxes from the table below
  • Installation manual available as a PDF from Adamat

Suitable for

Engine: Honda S2000 F20 and F22

Gearbox: BMW ZF 8HP automatic

ZF 8HP gearboxCodeOriginal BMW engine
8HP70GA8HP70N57, N57N
8HP75GA8HP75XN57, N57N
8HP50, 8HP50ZGA8HP50ZB58 (B58B30)
8HP75Z, 8HP75GA8HP75ZB57 (B57B30)
8HP51Z, 8HP51GA8HP51ZB48 (B48B20), B46 (B46B20)
8HP45ZGA8HP45XB47C/D20

If you are unsure whether your 8HP fits, enter your gearbox code in the note field when ordering. We will check it with Adamat.

Technical specifications

  • Manufacturer: Adamat Performance (Poland)
  • Article number: ADM-S2000-8HP4575
  • Engine: Honda S2000 F20, F22
  • Gearbox: BMW ZF 8HP45, 8HP50, 8HP51, 8HP70, 8HP75
  • Flywheel: AlZnMg+Ti with the strength of 42CrMo4 steel, steel starter ring gear, converter centred directly
  • Maximum flywheel torque: 2000 Nm
  • Flywheel weight: 3.6 kg (total)
  • Adapter plate: AW7075-T651 aluminium, 24.5 mm thick, stronger than S355 and C45 (1.0503) steel
  • Included: main flywheel with starter ring gear, adapter plate, bolts for flywheel, adapter and gearbox
  • Installation manual: as a PDF from Adamat

Installation and delivery

The main flywheel mounts on the crankshaft of the F20 or F22, the 8HP torque converter centres directly in the flywheel and the adapter plate connects the block to the bell housing. All bolts are included in the set and the installation manual is available as a PDF.

When ordering, choose whether you want the aluminium parts anodised. If you have a different engine tilt or want to pass on your chassis or gearbox code, fill in the note field. Adamat makes the set to order, with a lead time of 5 to 7 weeks. Anodising takes about 2 weeks extra.

Honda F20 or F22 with a BMW 8HP behind it: a light 3.6 kg flywheel and a 24.5 mm adapter complete the combination.

Why choose this S2000 8HP swap kit?

Anyone who wants to combine an F20 or F22 with an 8HP automatic needs an adapter and a flywheel that fit each other exactly. Adamat designed and made the adapter and flywheel itself, so the 8HP converter centres directly in the flywheel and you do not have to combine separate parts from different brands. Adamat Performance has more than 15 years of experience in motorsport.

Frequently asked questions

Does the S2000 8HP swap kit fit the F20 and the F22?

Yes, the S2000 8HP swap kit is made for both the F20 and the F22 from the Honda S2000.

Which 8HP gearboxes can I use?

The 8HP70 and 8HP75 from the N57, the 8HP50Z from the B58, the 8HP75Z from the B57, the 8HP51Z from the B48 and B46 and the 8HP45 from the B47.

How heavy is the flywheel?

The flywheel weighs 3.6 kg in total, including the steel starter ring gear, and is designed for a maximum of 2000 Nm.

What do I choose when ordering?

You choose whether the aluminium parts are anodised; this is done externally and takes about 2 weeks extra. In the note field you can pass on your chassis, gearbox code or a different engine tilt.

What is the lead time?

Adamat makes the set to order. Allow 5 to 7 weeks, about 2 weeks longer with anodising.

Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.

Additional information

Weight12 kg

Reviews

There are no reviews yet.

Be the first to review “Adamat Honda S2000 F20/F22 swap kit for BMW ZF 8HP45/50/70/75”
EN

Your Shopping cart

Close