Adamat Toyota 1JZ/2JZ clutch kit 650/780 Nm for BMW gearboxes

€1.131,36 Incl. VAT

Adamat Toyota 1JZ/2JZ clutch kit 650/780 Nm for BMW gearboxes

Complete clutch set to connect a Toyota 1JZ or 2JZ to a manual BMW gearbox: adapter plate, hybrid flywheel of approx. 6.5 kg, 240 mm LUK 8090S Kevlar disc, SACHS pressure plate, release bearing and bolts. The standard set goes up to 650 Nm, with sintered disc and SACHS Racing pressure plate up to 780 Nm. When ordering, you choose your gearbox and you pass on any extra requests in the note field. Lead time 5 to 7 weeks.

Available on back-order|Estimated delivery time: 5 to 7 weeks

Adamat makes the adapter and the clutch disc to fit your gearbox. Choose the code of your gearbox.

If you have a GS6 gearbox, enter the letter code on the type plate or sticker, for example HGD, JGL or HGU. Leave this field empty for an S5D, GS5 or S6S gearbox.

For example your chassis, engine code, a different engine inclination or anything else Adamat needs to take into account.

SKU: ADM-141 Category: Brand:

Description

Adamat Toyota 1JZ/2JZ clutch kit 650/780 Nm for BMW gearboxes

This 1JZ BMW clutch kit from Adamat Performance connects a Toyota 1JZ-GE, 1JZ-GTE, 2JZ-GE or 2JZ-GTE to a manual BMW gearbox. Everything for the transition from engine to gearbox comes in one set: an adapter plate, a light hybrid flywheel, a single-plate clutch with Kevlar disc, a SACHS pressure plate, a release bearing and the bolts.

The standard set is intended for engines up to 650 Nm. Adamat can also build the same set with a sintered disc and a SACHS Racing pressure plate, which takes it up to 780 Nm. If you want that version, put it in the note field when ordering. We agree the options and the extra cost with Adamat before the set is made.

When ordering, you choose which BMW gearbox you use, so that Adamat matches the adapter and the spline of the clutch disc to it. If your JZ will later make much more torque, Adamat also supplies multi-plate clutches up to 2400 Nm.

Main advantages

  • Everything in one box: adapter plate, flywheel, clutch disc, pressure plate, release bearing and the bolts for flywheel, adapter and gearbox
  • Hybrid flywheel of approx. 6.5 kg, CNC-machined from an aerospace-grade aluminium alloy with a cast iron friction surface
  • Twice as strong as dural 2017A (PA6): in terms of strength, the alloy comes close to S355 structural steel
  • Good heat dissipation thanks to the cast iron friction surface, which is wear-resistant and does not develop hard spots from overheating like a steel flywheel
  • Starter ring gear already fitted on the flywheel, single-mass design
  • 240 mm clutch disc with LUK 8090S Kevlar lining
  • SACHS pressure plate with SAC mechanism (self-adjusting)
  • Dynamically balanced as a complete clutch
  • Matched to your gearbox: adapter, spline and bearing design to suit the gearbox you choose

Suitable for

Engine: Toyota 1JZ-GE, 1JZ-GTE, 2JZ-GE and 2JZ-GTE

Gearbox: manual BMW gearboxes

BMW gearboxFrom chassisOriginal engineInput shaft
S5D-320Z, S5D-310Z, S5D-260Z (5-speed)E30, E36, E34, E39, E38, E46M50, M52, M54, S50, S5223×29-10N
GS5-39DZ (5-speed)E46, E39M5728×35-10N
S6S-420G (6-speed)E46 M3S5428×35-10N
GS6-53DZ (6-speed)E60, E61M57N, M57N232,5×35-26N, disc with torsion dampers

For the GS6-53DZ, choose the correct version when ordering, because the bell housing differs per version. If your gearbox is not listed, choose “Other gearbox” and put the code in the note field. We will then check with Adamat what is possible.

Technical specifications

  • Manufacturer: Adamat Performance (Poland)
  • Part number: 1-2-JZ-SMCK-2018
  • Engine: Toyota 1JZ-GE, 1JZ-GTE, 2JZ-GE, 2JZ-GTE
  • Type: single-plate clutch (one disc)
  • Maximum torque: 650 Nm standard, 780 Nm with sintered disc and SACHS Racing pressure plate
  • Flywheel: hybrid single-mass flywheel, approx. 6.5 kg, aerospace-grade aluminium alloy with cast iron friction surface and starter ring gear
  • Clutch disc: 240 mm with LUK 8090S Kevlar lining
  • Pressure plate: SACHS with SAC mechanism
  • Release bearing: included
  • Balancing: complete clutch dynamically balanced
  • Included: adapter plate, flywheel with starter ring gear, clutch disc, pressure plate, release bearing, flywheel bolts and bolts for adapter and gearbox

Installation and delivery

Depending on your gearbox, the pilot bearing sits in the flywheel or the flywheel gets a centring pin that locates in the bearing of the input shaft. Adamat chooses that design based on the gearbox you specify, so choose the correct code when ordering.

If you have a special request, such as the 780 Nm version, a different engine inclination or something about your chassis, put it in the note field. Adamat makes the set to order. The lead time is 5 to 7 weeks.

A JZ clutch with adapter for your BMW gearbox, with a light flywheel that sheds heat well and a disc that holds up to 650 Nm.

Why choose this 1JZ BMW clutch kit?

Adamat Performance develops and manufactures its swap parts in Poland and has used them for years in drift, race and drag cars. Because adapter, flywheel and clutch come from one manufacturer, the dimensions match each other and you do not have to hunt for separate parts. For a JZ up to 650 Nm, a single-plate clutch is a straightforward choice, and if your engine grows further, Adamat has heavier clutches in the same system.

Frequently asked questions

Which gearbox can I choose?

When ordering, you choose your gearbox: the S5D-320Z, S5D-310Z or S5D-260Z, the GS5-39DZ, one of the GS6-53DZ versions or the S6S-420G from the E46 M3. If your gearbox is not listed, choose “Other gearbox” and state the code in the note field.

Does this 1JZ BMW clutch kit also fit a 2JZ?

Yes, this 1JZ BMW clutch kit is made for the 1JZ-GE, 1JZ-GTE, 2JZ-GE and 2JZ-GTE.

How much torque can the clutch handle?

The standard set is for engines up to 650 Nm. With a sintered disc and a SACHS Racing pressure plate it goes up to 780 Nm; ask about this via the note field. For even more torque, Adamat makes multi-plate clutches up to 2400 Nm.

What is the lead time?

Adamat makes the set to order for your gearbox. Allow 5 to 7 weeks.

Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.

Additional information

Weight17 kg

Reviews

There are no reviews yet.

Be the first to review “Adamat Toyota 1JZ/2JZ clutch kit 650/780 Nm for BMW gearboxes”
EN

Your Shopping cart

Close