Adamat Ford Barra 4.0 swap kit for BMW ZF 8HP45/50/70/75

€822,02 Incl. VAT

Adamat Ford Barra 4.0 swap kit for BMW ZF 8HP45/50/70/75

Swap kit to mate a Ford Barra 4.0 from the Falcon or Territory to a BMW ZF 8HP. The kit includes an AlZnMg+Ti flywheel (5.1 kg, up to 2000 Nm) with a steel ring gear, in which the torque converter centres directly, a 40 mm AW7075-T651 adapter plate and all bolts. When ordering, you choose whether the aluminium parts are anodised. Lead time 5 to 7 weeks, approx. 2 weeks longer with anodising.

Available on back-order|Estimated delivery time: 5 to 7 weeks

Optional anodised coating on the aluminium parts. This is done externally and adds approximately 2 weeks to the lead time.

For example the gearbox code of your 8HP, your chassis, a different engine tilt or anything else Adamat needs to take into account.

SKU: ADM-268 Category: Brand:

Description

Adamat Ford Barra 4.0 swap kit for BMW ZF 8HP45/50/70/75

The Ford Barra 4.0 from the Falcon and Territory behind a BMW eight-speed automatic: that is what this Barra 8HP swap kit from Adamat Performance makes possible. The kit fits the ZF 8HP45, 8HP50, 8HP51, 8HP70 and 8HP75 from BMWs with, among others, the N57, B57 and B58 engine.

The kit contains a main flywheel made of AlZnMg+Ti, a light alloy with the strength of 42CrMo4 steel. The flywheel weighs 5.1 kg, is designed for a maximum of 2000 Nm and has a steel ring gear for the starter motor. The torque converter of the 8HP centres directly in the flywheel.

A 40 mm AW7075-T651 aluminium adapter plate connects the block to the gearbox. The bolts for flywheel, adapter and gearbox are included.

Key benefits

  • Barra 4.0 with ZF 8HP: for the engine from the Ford Falcon and Territory
  • Flywheel up to 2000 Nm, made of AlZnMg+Ti with the strength of 42CrMo4 steel
  • Torque converter centres directly in the flywheel
  • Steel ring gear for the starter motor
  • Adapter plate of 40 mm AW7075-T651, according to Adamat stronger than S355 and C45 steel (1.0503)
  • Six 8HP versions according to Adamat, from the 8HP45Z to the 8HP75Z
  • Bolts for flywheel, adapter and gearbox included
  • Installation manual available as a PDF from Adamat

Suitable for

Engine: Ford Barra 4.0 from the Falcon and Territory

ZF 8HPGearbox codeFrom BMW with engine
8HP70GA8HP70N57, N57N
8HP75GA8HP75XN57, N57N
8HP50ZGA8HP50ZB58B30
8HP75ZGA8HP75ZB57B30
8HP51ZGA8HP51ZB48B20, B46B20
8HP45ZGA8HP45XB47C20, B47D20

If your 8HP is not in the table, enter the gearbox code in the note field and we will check with Adamat.

Technical specifications

  • Manufacturer: Adamat Performance (Poland)
  • Article number: ADM-BARRA-8HP4575
  • Engine: Ford Barra 4.0 (Falcon, Territory)
  • Gearbox: BMW ZF 8HP45, 8HP50, 8HP51, 8HP70 and 8HP75 (see table)
  • Flywheel: AlZnMg+Ti, 5.1 kg, designed for a maximum of 2000 Nm, with steel ring gear
  • Torque converter: centres directly in the flywheel
  • Adapter plate: AW7075-T651 aluminium, 40 mm thick
  • Included: flywheel, adapter plate, bolts for flywheel, adapter and gearbox
  • Manual: installation manual as a PDF

Installation and delivery

The Adamat flywheel goes on the crankshaft of the Barra, after which the adapter plate is fitted to the block. You slide the 8HP with the torque converter into the flywheel and bolt it to the adapter. All the bolts for this are included in the kit.

When ordering, you choose whether the aluminium parts are anodised. Use the note field for the gearbox code of your 8HP, your chassis or a different engine tilt. Adamat makes the kit to order. The lead time is 5 to 7 weeks, approximately 2 weeks longer with anodising.

Ford Barra up front, BMW 8HP behind it: Adamat supplies the flywheel and adapter to put the Barra on the 8HP.

Why choose this Barra 8HP swap kit?

If you are building a Barra with far more horsepower than stock, the connection to the gearbox has to handle that torque. With a flywheel designed for up to 2000 Nm and a torque converter that centres directly in the flywheel, this kit meets that need. You get the flywheel, adapter and bolts from one manufacturer in Poland, so we can check questions about your project directly with Adamat.

Frequently asked questions

Which cars does the Barra 4.0 for this kit come from?

Adamat lists the Barra 4.0 from the Ford Falcon and the Ford Territory.

How much torque can the Barra 8HP swap kit handle?

According to Adamat, the flywheel of the Barra 8HP swap kit is designed for a maximum of 2000 Nm.

What do I choose when ordering?

You choose whether the aluminium parts are anodised (externally, approximately 2 weeks extra). In the note field you can provide your gearbox code, chassis or a different engine tilt.

What is the lead time?

Adamat makes the kit to order: allow 5 to 7 weeks. Anodising adds approximately 2 weeks.

Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.

Additional information

Weight12 kg

Reviews

There are no reviews yet.

Be the first to review “Adamat Ford Barra 4.0 swap kit for BMW ZF 8HP45/50/70/75”
EN

Your Shopping cart

Close