Adamat Nissan RB swap kit for BMW ZF 8HP70 (N63 V8) and 8HP90 (N73/N74 V12)

€675,09 Incl. VAT

Adamat Nissan RB swap kit for BMW ZF 8HP70 (N63 V8) and 8HP90 (N73/N74 V12)

Kit to connect a Nissan RB20, RB25, RB26 or RB30 to the ZF automatic gearbox from the BMW N63 V8 (8HP70) or the N73 and N74 V12 (8HP70 and 8HP90): 19.5 mm AW7075-T651 adapter plate, 4.3 kg one-piece flywheel and all bolts, designed for up to 2000 Nm. When ordering, you choose your gearbox for the correct adapter version and whether you want the aluminium parts anodised. Lead time 5 to 7 weeks.

Available on back-order|Estimated delivery time: 5 to 7 weeks

Adamat makes the adapter in two versions. Choose which car your automatic gearbox comes from.

Optional anodised coating on the aluminium parts. This is done externally and adds about 2 weeks to the lead time.

For example your chassis, engine code, a different engine tilt or anything else Adamat should take into account.

SKU: ADM-227 Category: Brand:

Description

Adamat Nissan RB swap kit for BMW ZF 8HP70 (N63 V8) and 8HP90 (N73/N74 V12)

With this RB 8HP90 swap kit from Adamat Performance, you can fit a Nissan RB20, RB25, RB26 or RB30 behind the ZF automatic gearboxes from the BMW V8 and V12: the 8HP70 from the N63 and N73 and the 8HP90 from the N74. The kit contains an adapter plate, a one-piece flywheel and the bolts for flywheel, adapter and gearbox.

The flywheel replaces the original flywheel of the Nissan automatic, so you no longer need it. Adamat designed it for very powerful cars with up to 2000 Nm, and it fits all three gearboxes.

The adapter plate comes in two versions: one for the 8HP70 from the N63 V8 and one for the 8HP90 from the N74 and the 8HP70 from the N73. When ordering, you choose your gearbox, and you can have the aluminium parts anodised.

Key advantages

  • For the 8HP70 and 8HP90 from the BMW N63 V8 and the N73 and N74 V12
  • One-piece flywheel made of AlZnMg+Ti, with the strength of 42CrMo4 steel
  • Designed for up to 2000 Nm
  • Original Nissan flywheel no longer needed
  • Adapter plate made of AW7075-T651, 19.5 mm thick and according to Adamat stronger than S355 and C45 steel
  • Two adapter versions, you choose your gearbox when ordering
  • For all RB engines: RB20, RB25, RB26 and RB30
  • Installation manual available as a PDF

Suitable for

Engine: Nissan RB20, RB25, RB26 and RB30

Gearbox: BMW ZF 8HP70 and 8HP90 (8 speeds)

Adapter versionZF gearboxCodeFrom
Type 18HP70GA8HP70ZBMW N63 V8 (F10, F11, F12, F13, F07 GT)
Type 28HP90GA8HP90ZBMW N74 V12 (F01, F02) and Rolls-Royce Ghost
Type 28HP70GA8HP70ZBMW N73 V12 (Rolls-Royce Phantom)

If you have a different 8HP gearbox, take a look at our other Adamat 8HP swap kits or enter the code of your gearbox in the note field. We will check with Adamat what is possible.

Technical specifications

  • Manufacturer: Adamat Performance (Poland)
  • Item number: ADM-RB-8HPN63-N73N74
  • Engine: Nissan RB20, RB25, RB26, RB30
  • Gearbox: BMW ZF 8HP70 (N63 and N73) and 8HP90 (N74)
  • Adapter plate: AW7075-T651 aluminium, 19.5 mm thick, in two versions
  • Flywheel: one-piece, AlZnMg+Ti, 4.3 kg, fits all three gearboxes
  • Design torque: up to 2000 Nm
  • Included: adapter plate, flywheel, bolts for flywheel, adapter and gearbox, installation manual (PDF)

Fitting and delivery

The Adamat flywheel replaces the original flywheel on the RB crankshaft. The adapter plate goes between block and gearbox, and all bolts are included in the kit. An installation manual is available as a PDF.

When ordering, choose your gearbox so that you get the correct adapter version, and indicate whether you want the aluminium parts anodised. Special requirements, such as your chassis or a different engine tilt, go in the note field. Adamat makes the kit to order. The lead time is 5 to 7 weeks; anodising adds approximately 2 weeks.

An RB behind the 8HP70 or 8HP90 from the BMW V8 and V12, with adapter and flywheel designed for up to 2000 Nm.

Why choose this RB 8HP90 swap kit?

The 8HP70 and 8HP90 sit behind the V8 and V12 engines from BMW and the V12 from Rolls-Royce. If you want to use these gearboxes behind an RB with a lot of torque, you need an adapter and flywheel made for that. Adamat supplies both in one kit, with a flywheel that fits all three gearboxes and an adapter in the version for your gearbox.

Frequently asked questions

Which adapter version do I need?

Type 1 is for the 8HP70 from the N63 V8. Type 2 is for the 8HP90 from the N74 V12 and the 8HP70 from the N73 V12. You choose your gearbox when ordering.

Do I still need the original flywheel of the Nissan automatic?

No, the Adamat flywheel replaces the original flywheel of the Nissan automatic.

How much torque can the RB 8HP90 swap kit handle?

Adamat designed the RB 8HP90 swap kit for very powerful cars with up to 2000 Nm.

What else can I choose when ordering?

You can have the aluminium parts anodised, which adds approximately 2 weeks to the lead time. In the note field you can pass on extra information, such as your chassis, engine code or engine tilt.

What is the lead time?

Adamat makes the kit to order. Allow 5 to 7 weeks, with anodising approximately 2 weeks longer.

Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.

Additional information

Weight12 kg

Reviews

There are no reviews yet.

Be the first to review “Adamat Nissan RB swap kit for BMW ZF 8HP70 (N63 V8) and 8HP90 (N73/N74 V12)”
EN

Your Shopping cart

Close