Description
Adamat BMW N62/N62N V8 complete swap kit for BMW ZF 8HP45/50/51/70/75
With this N62 swap kit BMW 8HP from Adamat Performance you mate a BMW V8 N62 or N62N to the eight-speed ZF 8HP automatic from the newer BMW generations. The set contains a 50 mm thick adapter plate, a one-piece flywheel and the bolts for flywheel, adapter and gearbox.
This gives the older V8 a modern gearbox with eight gears, which BMW uses behind the B48, B57, B58 and N57, among others. The AlZnMg+Ti flywheel weighs 4.2 kg in total, has a steel starter ring gear and is designed for a torque of up to 2000 Nm.
When ordering you choose whether you want the aluminium parts anodised. In the note field you can give Adamat additional information about your swap.
Key benefits
- Everything for the engine-to-gearbox connection: adapter plate, flywheel and bolts for flywheel, adapter and gearbox
- One-piece flywheel made of AlZnMg+Ti, a light alloy with the strength of 42CrMo4 steel
- Designed for a maximum of 2000 Nm, also of interest if your N62 is getting more horsepower than stock
- Only 4.2 kg flywheel weight
- Steel starter ring gear on the flywheel for the starter motor
- 50 mm adapter plate made of AW7075-T651 aluminium
- Six ZF 8HP gearboxes: 8HP45Z, 8HP50Z, 8HP51Z, 8HP70, 8HP75 and 8HP75Z
- Fitting instructions available as a PDF from Adamat
Suitable for
Engine: BMW V8 N62 and N62N
Gearbox: BMW ZF 8HP automatic
| ZF 8HP gearbox | Code | Original BMW engine |
|---|---|---|
| 8HP70 | GA8HP70 | N57, N57N |
| 8HP75 | GA8HP75X | N57, N57N |
| 8HP50Z | GA8HP50Z | B58 (B58B30) |
| 8HP75Z | GA8HP75Z | B57 (B57B30) |
| 8HP51Z | GA8HP51Z | B48 (B48B20) |
| 8HP51Z | GA8HP51Z | B46 (B46B20) |
| 8HP45Z | GA8HP45X | B47C/D20 |
If you are unsure whether your gearbox is on this list, state the code in the note field. We will then check it with Adamat.
Technical specifications
- Manufacturer: Adamat Performance (Poland)
- Part number: ADM-N62-8HP45-75
- Engine: BMW V8 N62, N62N
- Gearbox: BMW ZF 8HP45Z, 8HP50Z, 8HP51Z, 8HP70, 8HP75, 8HP75Z
- Flywheel: one-piece, AlZnMg+Ti with the strength of 42CrMo4 steel
- Maximum flywheel torque: 2000 Nm
- Flywheel weight: 4.2 kg (total)
- Starter ring gear: steel
- Adapter plate: AW7075-T651 aluminium, 50 mm thick
- Included: adapter plate, flywheel with starter ring gear, bolts for flywheel, adapter and gearbox
- Fitting instructions: as a PDF from Adamat
Fitting and delivery
The flywheel goes on the crankshaft of the N62, and the 50 mm adapter plate fills the space between the V8 block and the bell housing of the 8HP. Adamat supplies the bolts for all connections, and the fitting instructions are available as a PDF.
When ordering you choose whether the aluminium parts are anodised. Other requests, such as your chassis, your gearbox code or a different engine tilt, go in the note field. Adamat makes the set to order and the lead time is 5 to 7 weeks. If you have the parts anodised, allow about 2 weeks extra.
The N62 V8 behind an eight-speed ZF 8HP: one set with a 50 mm adapter, a 4.2 kg flywheel and all bolts.
Why choose this N62 swap kit BMW 8HP?
Combining an N62 with an 8HP requires an adapter and a flywheel that are precisely matched to each other. Adamat makes both itself, so the parts fit together without you having to fit and measure yourself. With 2000 Nm the flywheel has plenty of headroom for heavier engine builds, and the 8HP can be found in many BMWs, which makes finding a gearbox easier. Adamat Performance has been working in motorsport for more than 15 years.
Frequently asked questions
Is this set also suitable for the N62N?
Yes, the set is made for both the N62 and the N62N.
Which 8HP gearboxes does the N62 swap kit BMW 8HP fit?
The N62 swap kit BMW 8HP fits the 8HP70 and 8HP75 from the N57, the 8HP50Z from the B58, the 8HP75Z from the B57, the 8HP51Z from the B48 and B46 and the 8HP45Z from the B47.
What does the flywheel weigh?
The one-piece flywheel weighs 4.2 kg in total, including the steel starter ring gear. It is designed for a maximum of 2000 Nm.
Which choices do I make when ordering?
You choose whether the aluminium parts are anodised; this is done externally and adds about 2 weeks. There is also a note field for your chassis, your gearbox code or a different engine tilt.
What is the lead time?
Adamat makes the set to order. Allow 5 to 7 weeks, about 2 weeks longer with anodising.
Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.












Reviews
There are no reviews yet.