Adamat Honda K20/K24 swap kit for Dodge ZF 8HP70/8HP90

€802,24 Incl. VAT

Adamat Honda K20/K24 swap kit for Dodge ZF 8HP70/8HP90

Swap kit to connect a Honda K20 or K24 to the ZF 8HP70 or 8HP90 from the Dodge Challenger, Charger or Hellcat: a one-piece AlZnMg+Ti flywheel (4.3 kg, for up to 2000 Nm) with ring gear, a reduction ring for the torque converter shaft, a 24 mm adapter plate and all bolts. When ordering, you choose whether the aluminium parts are anodised. Lead time 5 to 7 weeks.

Available on back-order|Estimated delivery time: 5 to 7 weeks

Optional anodised coating on the aluminium parts. This is done externally and adds about 2 weeks to the lead time.

For example the year of manufacture of your 8HP, your chassis, engine code, a different engine tilt or anything else Adamat should take into account.

SKU: ADM-278 Category: Brand:

Description

Adamat Honda K20/K24 swap kit for Dodge ZF 8HP70/8HP90

This K20 swap kit Dodge 8HP from Adamat Performance is made for anyone who wants to combine a Honda K20 or K24 with the ZF 8HP70 or 8HP90 from the Dodge Challenger, Charger or Hellcat. Adamat supplies everything to connect the engine and the automatic gearbox: a one-piece flywheel, a 24 mm adapter plate, a reduction ring for the torque converter shaft and the bolts for the flywheel, adapter and gearbox.

The AlZnMg+Ti flywheel weighs 4.3 kg and has an integrated ring gear. Adamat designed it for torque of up to 2000 Nm. The reduction ring is intended for the torque converter shaft of the 8HP and, according to Adamat, depends on the year of manufacture of the gearbox.

When ordering, you choose whether the aluminium parts are anodised. In the note field you can pass on additional information, such as the year of manufacture of your gearbox.

Key advantages

  • Complete kit: flywheel, adapter plate, reduction ring for the torque converter shaft and bolts for the flywheel, adapter and gearbox
  • One-piece flywheel for up to 2000 Nm, made of AlZnMg+Ti with the strength of 42CrMo4 steel
  • Integrated ring gear on the flywheel
  • Flywheel weight 4.3 kg
  • Reduction ring for the torque converter shaft of the 8HP, depending on the year of manufacture
  • 24 mm adapter plate made of AW7075-T651 aluminium, stronger than S355 and C45 steel
  • For the Dodge automatic: ZF 8HP70 and 8HP90 from the Challenger, Charger and Hellcat
  • Installation manual available as a PDF from Adamat

Suitable for

Engine: Honda K20 and K24

Gearbox: ZF 8HP70 and 8HP90 (8-speed)

ZF gearboxFrom
8HP70 / 8HP90Dodge Challenger, Dodge Charger, Dodge Hellcat

If you have an 8HP from another make or model, state the code in the note field. We will check with Adamat what is possible.

Technical specifications

  • Manufacturer: Adamat Performance (Poland)
  • Item number: ADM-K2024-8HPDODGE
  • Engine: Honda K20, K24
  • Gearbox: ZF 8HP70, 8HP90 from Dodge Challenger, Charger, Hellcat
  • Flywheel: one piece, AlZnMg+Ti with the strength of 42CrMo4 steel, with integrated ring gear
  • Maximum flywheel torque: 2000 Nm
  • Flywheel weight: 4.3 kg
  • Reduction ring: for the torque converter shaft of the 8HP, depending on the year of manufacture
  • Adapter plate: AW7075-T651 aluminium, 24 mm thick, stronger than S355 and C45 (1.0503) steel
  • Included: flywheel with ring gear, reduction ring, adapter plate, bolts for flywheel, adapter and gearbox
  • Installation manual: as a PDF from Adamat

Fitting and delivery

The flywheel goes on the crankshaft of the K engine, the reduction ring belongs to the torque converter shaft of the 8HP and the 24 mm adapter plate connects the block to the bell housing. The bolts are included in the kit and Adamat has an installation manual as a PDF.

When ordering, you choose whether the aluminium parts are anodised. Enter the year of manufacture of your 8HP, your chassis or a different engine tilt in the note field, so that Adamat can take it into account. The kit is made to order and the lead time is 5 to 7 weeks. With anodising, it takes approximately 2 weeks longer.

A Honda K engine with the eight-speed ZF from the Dodge: flywheel, adapter and reduction ring from Adamat in one kit.

Why choose this K20 swap kit Dodge 8HP?

With this kit you mount a Honda K20 or K24 in front of the ZF 8HP70 or 8HP90 from the Dodge Challenger, Charger or Hellcat, without having an adapter or flywheel made yourself. The reduction ring for the torque converter shaft is already included, so you do not have to look for it separately. Adamat Performance has more than 15 years of experience in motorsport and makes the adapter and flywheel itself.

Frequently asked questions

Does the K20 swap kit Dodge 8HP also fit a K24?

Yes, the K20 swap kit Dodge 8HP is made for both the Honda K20 and the K24.

What is the reduction ring for?

The reduction ring is for the torque converter shaft of the 8HP. Which version you need depends on the year of manufacture of your gearbox, so please state the year of manufacture in the note field.

How much torque can the flywheel handle?

The one-piece flywheel is designed for up to 2000 Nm. It weighs 4.3 kg and has an integrated ring gear.

What do I choose when ordering?

You choose whether the aluminium parts are anodised; this is done externally and takes approximately 2 weeks extra. In the note field you can pass on the year of manufacture of your gearbox, your chassis or a different engine tilt.

What is the lead time?

Adamat makes the kit to order. Allow 5 to 7 weeks, with anodising approximately 2 weeks longer.

Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.

Additional information

Weight12 kg

Reviews

There are no reviews yet.

Be the first to review “Adamat Honda K20/K24 swap kit for Dodge ZF 8HP70/8HP90”
EN

Your Shopping cart

Close