Adamat Datsun L24/L26/L28 swap kit for BMW ZF 8HP45 from N55 and 8HP45R (M235i Racing)

€691,15 Incl. VAT

Adamat Datsun L24/L26/L28 swap kit for BMW ZF 8HP45 from N55 and 8HP45R (M235i Racing)

Swap kit for connecting a Datsun L24, L26 or L28 to the BMW ZF 8HP45 from the N55 or the 8HP45R from the M235i Racing. The kit includes a complete AlZnMg+Ti flywheel (3.1 kg, up to 1200 Nm) with ring gear for the original Datsun starter motor, a 24.5 mm AW7075-T651 adapter plate and all bolts. When ordering, you choose whether the parts are anodised. Lead time 5 to 7 weeks, approx. 2 weeks longer with anodising.

Available on back-order|Estimated delivery time: 5 to 7 weeks

Optional anodised layer on the aluminium parts. This is done externally and adds approximately 2 weeks to the lead time.

For example your chassis, engine code, a different engine tilt or anything else Adamat should take into account.

SKU: ADM-302 Category: Brand:

Description

Adamat Datsun L24/L26/L28 swap kit for BMW ZF 8HP45 from N55 and 8HP45R (M235i Racing)

With this Datsun L28 swap kit 8HP45 from Adamat Performance, a classic Datsun L-series six-cylinder, the L24, L26 or L28, is paired with the ZF 8HP45 automatic from the BMW N55. The 8HP45R from the M235i Racing with S55 is also on Adamat’s list.

The kit revolves around two parts: a complete flywheel made of the high-strength alloy AlZnMg+Ti with a ring gear for the original Datsun starter motor, and a 24.5 mm AW7075-T651 Fortal adapter plate between the L block and the 8HP. The bolts for the flywheel, adapter plate and gearbox are included.

The flywheel weighs 3.1 kg in total and is designed by Adamat for torque up to 1200 Nm.

Key benefits

  • Complete flywheel in the kit: no separate flexplate needed, the Adamat flywheel takes over that role
  • AlZnMg+Ti alloy with a strength comparable to 42CrMo4 steel
  • Up to 1200 Nm according to Adamat’s design value
  • Only 3.1 kg for the complete flywheel
  • Ring gear for the original Datsun starter motor, so no other starter needed
  • 24.5 mm AW7075-T651 Fortal adapter plate, according to Adamat stronger than S355 and C45 steel (1.0503)
  • Mounting bolts for flywheel, adapter and gearbox included
  • Fitting instructions available as a PDF

Suitable for

Engine: Datsun L24, L26 and L28

Gearbox: BMW ZF 8HP45 automatic

ZF 8HP typeCodeFrom BMW engine
8HP45GA8HP45ZN55
8HP45R–S55 (M235i Racing)

If you have a different 8HP or are unsure about your gearbox code, enter it in the note field. We will check with Adamat whether the kit fits.

Technical specifications

  • Manufacturer: Adamat Performance (Poland)
  • Item number: ADM-DATL2X-8HPN55
  • Engine: Datsun L24, L26, L28
  • Gearbox: BMW ZF 8HP45 (GA8HP45Z, N55) and 8HP45R (S55, M235i Racing)
  • Flywheel: complete, AlZnMg+Ti, 3.1 kg, designed for up to 1200 Nm, ring gear for the original Datsun starter motor
  • Adapter plate: Fortal AW7075-T651 aluminium, 24.5 mm thick
  • Included: flywheel, adapter plate, bolts for flywheel, adapter and gearbox
  • Instructions: fitting instructions as a PDF

Fitting and delivery

The flywheel goes on the crankshaft of the L engine and the adapter plate connects the block to the bellhousing of the 8HP45. Because the ring gear is matched to the original Datsun starter, you can keep using your existing starter motor.

When ordering, you choose whether the aluminium parts get an anodised layer. If you have information for Adamat, such as your chassis, the exact gearbox code or a different engine tilt, enter it in the note field. Adamat makes the kit to order. Allow a lead time of 5 to 7 weeks, approximately 2 weeks longer with anodising.

A Datsun L six-cylinder with a modern BMW eight-speed automatic, connected by a light flywheel and a sturdy Adamat adapter plate.

Why choose this Datsun L28 swap kit 8HP45?

To pair an L engine with an 8HP you need a flywheel, a ring gear and a matching adapter. Adamat supplies these as one kit in which everything is matched, so you do not have to combine parts from different brands. With more than 15 years of motorsport experience, Adamat Performance designs its swap kits in Poland, and we take questions about your build directly to them.

Frequently asked questions

Which Datsun engines fit this kit?

The kit is made for the Datsun L24, L26 and L28.

Do I still need a flexplate with the Datsun L28 swap kit 8HP45?

No, the Datsun L28 swap kit 8HP45 includes a complete flywheel with ring gear. That flywheel fits the original Datsun starter motor.

How much torque can the flywheel handle?

Adamat has designed the flywheel for 1200 Nm.

What do I choose when ordering?

You choose whether the aluminium parts are anodised; this is done externally and takes approximately 2 weeks extra. There is also a note field for things like your chassis or your gearbox code.

What is the lead time?

Adamat makes the kit to order; the lead time is 5 to 7 weeks. With anodising it takes approximately 2 weeks longer.

Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.

Additional information

Weight12 kg

Reviews

There are no reviews yet.

Be the first to review “Adamat Datsun L24/L26/L28 swap kit for BMW ZF 8HP45 from N55 and 8HP45R (M235i Racing)”
EN

Your Shopping cart

Close