BMW E30 E36 E46 E92 E82 Reinforced Gearbox Mounts

€53,71 Incl. VAT

BMW E30 E36 E46 E92 E82 Reinforced Gearbox Mounts

Set of 2 reinforced gearbox mounts for rear-wheel-drive BMWs: E21, E30, E36, E46, E81 to E88, E90 to E93, E34 and E39. S355 steel with zinc-plated base and 80 Shore A rubber that copes better with heat and wear than polyurethane. Replaces four OE numbers and keeps the gearbox firmly in place during drifting and track work.

4 in stock (can be backordered)|Estimated delivery time: 1 to 2 working days

SKU: 0155 Category:

Description

BMW E30 E36 E46 E92 E82 Reinforced Gearbox Mounts

These reinforced gearbox mounts are a set of two gearbox rubbers for a long list of rear-wheel-drive BMWs, from the E21 and E30 to the E46, E90 to E93, E82 and the 5 Series E34 and E39. They replace the original rubbers with OE numbers 23701141614, 22316799331, 23711175424 and 23711175939 and hold the gearbox firmly in place.

Original gearbox mounts become soft and sag over time. During drifting, clutch kicks and hard launches the gearbox then moves around, which you notice as vague shifting and knocks in the driveline. With these mounts the gearbox gets a firm base again.

Key benefits of these reinforced gearbox mounts

  • Set of 2 gearbox mounts, the price is for the set
  • S355 steel with zinc-plated base, thread and nuts
  • 80 Shore A rubber, produced with technology that is also used in tanks and military vehicles
  • Better resistance to heat and wear than polyurethane mounts
  • Considerably longer service life than the original rubbers
  • Replaces four OE numbers and fits many BMW models

Suitable for

Rear-wheel-drive BMW

  • 1 Series E81, E82, E87, E88 and the 1M (E82)
  • 3 Series E21 and E30 (not the M3)
  • 3 Series E36 and E36 M3
  • 3 Series E46 (not the X models) and E46 M3
  • 3 Series E90, E91, E92, E93 (not xi or xd) and E9X M3
  • 5 Series E34 and E39

Technical specifications

  • Item number: 0155
  • Application: gearbox mounts (gearbox rubbers)
  • Contents: set of 2
  • Material: S355 steel, base, thread and nuts zinc-plated
  • Rubber hardness: 80 Shore A
  • Colour: black and zinc-plated
  • Replaces OE numbers: 23701141614, 22316799331, 23711175424, 23711175939
  • Weight: 0.44 kg

Installation and delivery

The reinforced gearbox mounts go in place of the original gearbox rubbers, in the crossmember under the gearbox. Support the gearbox with a jack, undo the crossmember and lower it slightly. Then swap both rubbers and refit everything to the specified tightening torque.

Do not lower the gearbox further than necessary, so that the shift linkage and cables are not put under strain. A good moment to also look at the engine mounts and the flex disc: worn rubbers rarely come alone. After the first few drives, check that the nuts of the reinforced gearbox mounts are still tight.

You will find more driveline parts in our gearbox mounts category. If you also want to hold the engine more firmly in an E90 or E82, take a look at our reinforced engine mounts for the E9X and E8X.

A gearbox that stays put shifts faster and more crisply.

Why choose these reinforced gearbox mounts?

Original gearbox mounts are often too soft for sporty use, and polyurethane can suffer from the heat around the exhaust and the gearbox. This set uses an 80 Shore A rubber that, according to the manufacturer, copes better with temperature and wear than polyurethane, on a zinc-plated steel base. One set fits a large share of the classic and more modern rear-wheel-drive BMWs.

Frequently asked questions

Is the price per piece or per set?

Per set of 2 reinforced gearbox mounts. So you replace both rubbers in one go.

Do they fit an xDrive or E46 X model?

No. The E46 X models and the E90 to E93 xi and xd are excluded.

Do they fit an E30 M3?

No, the E30 M3 is not on the list. The regular E30 is.

Which original parts do they replace?

OE numbers 23701141614, 22316799331, 23711175424 and 23711175939.

How hard is the rubber?

The rubber has a hardness of 80 Shore A. That is a firm rubber, but it is still rubber and not a rigid block, so the mount still damps some vibration.

Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.

Additional information

Weight0,44 kg
Car make

BMW

Model

E30, E36, E46, E81, E82, E87, E88

Reviews

There are no reviews yet.

Be the first to review “BMW E30 E36 E46 E92 E82 Reinforced Gearbox Mounts”
EN

Your Shopping cart

Close