Adamat BMW single-mass clutch kit M50/S50/M52/M54/S54/M57

€726,02 Incl. VAT

Adamat BMW single-mass clutch kit M50/S50/M52/M54/S54/M57

Light single-mass clutch kit that replaces the original dual-mass flywheel of your BMW inline six. The 4.9 kg flywheel is CNC-machined from AlZnMg+Ti and comes with a 240 mm clutch disc with LUK 8090S lining, a SACHS pressure plate and a release bearing, balanced together and suitable up to 650 Nm. When ordering, you choose your engine and state your gearbox in the note field. Lead time 5 to 7 weeks.

Available on back-order|Estimated delivery time: 5 to 7 weeks

Choose the engine the clutch kit will be fitted to.

Enter the code of your gearbox here (for example S5D-320Z, GS6-37BZ or S6S-420G), your chassis or anything else Adamat needs to take into account.

Description

Adamat BMW single-mass clutch kit M50/S50/M52/M54/S54/M57

This BMW single-mass clutch from Adamat Performance replaces the heavy original dual-mass flywheel of your BMW inline six with a light 4.9 kg flywheel. The kit fits the M50, S50, M52, M54, S54 and M57 and goes between the original engine and gearbox without modifications.

The flywheel is CNC-machined from AlZnMg+Ti, an aerospace alloy that is stronger than the widely used duralumin 2017A. It is combined with a rigid 240 mm clutch disc with LUK 8090S lining with kevlar and a SACHS pressure plate. The clutch is made for engines up to 650 Nm.

With less rotating mass, the engine revs up faster and drops back faster. You notice this when shifting on the track and when drifting, where you like to keep the engine high in the rev range.

Key benefits

  • Flywheel of only 4.9 kg, single-mass and CNC-machined
  • AlZnMg+Ti aerospace alloy, stronger than duralumin 2017A
  • Replaceable friction surface made of nodular cast iron in the flywheel
  • Ring gear already fitted on the flywheel
  • Rigid 240 mm clutch disc with LUK 8090S lining with kevlar
  • SACHS pressure plate with SAC mechanism, including release bearing
  • Fits without modifications on the original engine and gearbox
  • Balanced on a CIMAT machine, with measurement report in the box

Suitable for

Engine: BMW M50, S50, M52, M54, S54 and M57

Gearbox: the original manual gearbox fitted with these engines

When ordering, you choose your engine. The spline of the clutch disc depends on your gearbox, so please state the code of your gearbox (for example S5D-320Z, GS6-37BZ or S6S-420G) in the note field. If you are not sure which gearbox you have, we will find out together with Adamat.

Technical specifications

  • Manufacturer: Adamat Performance (Poland)
  • Part number: BM-SMK-MS524
  • Engine: BMW M50, S50, M52, M54, S54, M57
  • Maximum torque: 650 Nm
  • Flywheel: single-mass, AlZnMg+Ti, CNC-machined, 4.9 kg, with ring gear and replaceable friction surface made of nodular cast iron
  • Clutch disc: 240 mm, rigid, LUK 8090S lining with kevlar
  • Pressure plate: SACHS with SAC mechanism
  • Balancing: dynamic, as a complete clutch, on a CIMAT balancing machine
  • Included: flywheel with ring gear, clutch disc, pressure plate, release bearing, flywheel bolts and balancing measurement report

Installation and delivery

The flywheel takes the place of the original flywheel and is mounted on the crankshaft with the supplied bolts. Pressure plate, disc and flywheel are balanced together in advance, so you fit them as one unit.

When ordering, choose your engine and enter the code of your gearbox and, if applicable, your chassis in the note field. Adamat assembles the kit to order. The lead time is 5 to 7 weeks.

A light 4.9 kg flywheel with LUK kevlar disc and SACHS pressure plate, fitting the original inline six and gearbox.

Why choose this BMW single-mass clutch?

A clutch replacement is the moment to swap the dual-mass flywheel for a light single-mass version. For this, Adamat supplies a complete kit in which the flywheel, disc and pressure plate are already matched to each other. The flywheel is made of an aerospace alloy instead of steel, so low weight goes together with a strong material. If your engine develops further later on, Adamat also offers versions with sintered or 100% kevlar discs and a SACHS Racing pressure plate up to 780 Nm, as well as multi-disc clutches up to 2400 Nm.

Frequently asked questions

Which engines does this clutch kit fit?

The BMW M50, S50, M52, M54, S54 and M57. You choose your engine when ordering.

Do I need to state my gearbox?

Yes, please. The spline of the clutch disc depends on the gearbox. Enter the code of your gearbox in the note field when ordering, and Adamat will supply the correct disc.

How much torque can this BMW single-mass clutch handle?

This BMW single-mass clutch is made for engines up to 650 Nm. For more torque, Adamat can build a version with a sintered or 100% kevlar disc and SACHS Racing pressure plate up to 780 Nm. Please contact us for this.

What is included in the kit?

4.9 kg flywheel with ring gear, 240 mm clutch disc with LUK 8090S lining, SACHS pressure plate, release bearing, flywheel bolts and a dynamic balancing measurement report.

What is the lead time?

Adamat assembles the kit to order. Allow 5 to 7 weeks.

Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.

Additional information

Weight13 kg

Reviews

There are no reviews yet.

Be the first to review “Adamat BMW single-mass clutch kit M50/S50/M52/M54/S54/M57”
EN

Your Shopping cart

Close