SACHS Racing reinforced pressure plate 240 mm 883082.001243 for Adamat clutches

€365,78 Incl. VAT

SACHS Racing reinforced pressure plate 240 mm 883082.001243 for Adamat clutches

Reinforced 240 mm SACHS Racing pressure plate, the same one Adamat fits in its heavier single-disc and twin-disc clutches. Depending on the discs, according to Adamat it ranges from 650 Nm with a single LUK 8090S disc to 1420 Nm in a twin-disc clutch with sintered discs. You only get the pressure plate. Lead time 1 to 2 weeks.

Available on back-order|Estimated delivery time: 1 to 2 weeks

SKU: ADM-140 Category: Brand:

Description

SACHS Racing reinforced pressure plate 240 mm 883082.001243 for Adamat clutches

The SACHS Racing pressure plate 883082.001243 is a reinforced 240 mm pressure plate that Adamat Performance uses in its heavier single-disc and twin-disc clutches. With this pressure plate, the same clutch can transmit more torque than with a standard pressure plate.

How much torque depends on the clutch discs you combine it with. Adamat gives four example configurations, from a single disc with LUK 8090S lining to a twin-disc clutch with sintered discs. They are listed in the table below.

If you already have an Adamat clutch and want to make it heavier-duty, or if you are building your own kit with 240 mm discs, this is the pressure plate Adamat uses for that.

Key benefits

  • Reinforced SACHS Racing version for clutches that need to transmit more torque
  • 240 mm diameter, the size of the clutch discs in the Adamat kits
  • Original SACHS part number 883082.001243
  • For single-disc and twin-disc clutches, with LUK 8090S or sintered discs
  • Up to 1420 Nm in a twin-disc clutch with sintered discs, according to Adamat
  • Torque per combination specified by Adamat, so you know in advance which discs you need

Suitable for

Adamat uses this pressure plate in clutches with 240 mm discs. These are the example configurations Adamat itself lists:

ClutchClutch discTorque up to
Single-disc clutchLUK 8090S lining650 Nm
Single-disc clutch4-pad disc with sintered lining780 Nm
Twin-disc clutchLUK 8090S lining1180 Nm
Twin-disc clutchsintered discs1420 Nm

The pressure plate is supplied on its own. If you are not sure whether it fits your flywheel and clutch, send us a message with the details of your kit. We will check with Adamat.

Technical specifications

  • Manufacturer: SACHS Performance, supplied via Adamat Performance (Poland)
  • Article number: 883082.001243
  • Type: reinforced pressure plate (SACHS Racing)
  • Diameter: 240 mm
  • Torque according to Adamat: 650 to 1420 Nm, depending on the clutch discs
  • Contents: 1 pressure plate

Installation and delivery

The pressure plate replaces the existing pressure plate of your clutch. Make sure the discs and flywheel are also made for the torque of your engine: the table above shows which combination goes with which torque. The lead time is 1 to 2 weeks.

A pressure plate that Adamat itself fits in its heavier clutches, available separately for your own kit.

Why choose this SACHS Racing pressure plate?

Adamat builds this SACHS Racing pressure plate into its heavier clutches and specifies for each disc combination how much torque the kit can handle. That way you know in advance what to expect. Useful if you want to upgrade an existing Adamat clutch or replace a worn pressure plate.

Frequently asked questions

How much torque can this pressure plate handle?

That depends on the discs. According to Adamat, it is 650 Nm with a single LUK 8090S disc, 780 Nm with a single sintered 4-pad disc, 1180 Nm in a twin-disc clutch with LUK 8090S discs and 1420 Nm in a twin-disc clutch with sintered discs.

Can I fit the SACHS Racing pressure plate in my existing Adamat clutch?

The SACHS Racing pressure plate is the pressure plate Adamat uses in its heavier clutches with 240 mm discs. Send us the details of your current kit and we will check with Adamat whether it fits without modifications.

Are clutch discs or a release bearing included?

No, you only get the pressure plate. Discs, flywheel and release bearing are ordered separately.

What is the lead time?

The lead time is 1 to 2 weeks.

Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.

Additional information

Weight6 kg

Reviews

There are no reviews yet.

Be the first to review “SACHS Racing reinforced pressure plate 240 mm 883082.001243 for Adamat clutches”
EN

Your Shopping cart

Close