Mishimoto universal -10AN hose with fittings 1.22 m (4 ft) straight and 90 degree

€67,00 Incl. VAT

Mishimoto universal -10AN hose with fittings 1.22 m (4 ft) straight and 90 degree

Ready-to-fit -10AN hose of 1.22 m (4 ft) with a straight and a 90 degree swivel fitting, pre-assembled. Black nylon (up to 69 bar) or stainless steel (up to 52 bar), with CPE core for oil, fuel and coolant. Lead time: 4 to 7 days.

Available on back-order|Estimated delivery time: 4 to 7 days

SKU: MMSBH-10-4NBK Category: Brand:

Description

Mishimoto universal -10AN hose with fittings 1.22 m (4 ft) straight and 90 degree

The Mishimoto -10AN hose with fittings 4 ft is a ready-to-fit braided hose of 1.22 m. One end carries a straight and the other a 90 degree -10AN swivel fitting, both pre-assembled. No cutting or crimping required: connect, tighten and go.

-10AN hose with fittings 4 ft by Mishimoto
Mishimoto -10AN hose with fittings 4 ft

You choose between two versions when ordering. The black version has a nylon outer braid over a woven stainless steel inner jacket, handles up to 69 bar (1000 psi) and works from -23 °C to 150 °C. The stainless version has a stainless steel outer braid, is rated at 52 bar (750 psi) and works from -40 °C to 149 °C. Both have a CPE rubber core for fuel, oil and coolant, ideal for an oil cooler system or a turbo oil drain.

Key benefits

  • Ready to fit: straight and 90 degree -10AN fittings pre-assembled
  • Swivel nuts, so the hose does not twist while tightening
  • CPE rubber core for petrol, diesel, engine oil and coolant
  • Woven stainless steel jacket for high pressure resistance
  • Up to 69 bar in black nylon, 52 bar in stainless steel
  • Choice of black nylon or stainless steel outer braid
  • Mishimoto Lifetime Warranty from the manufacturer

Suitable for

Universal for -10AN lines

  • Oil cooler lines between engine and oil cooler
  • Turbo oil drain
  • Fuel and coolant lines with -10AN connections
  • A -10AN connection on both ends: one straight, one at 90 degrees

Technical specifications

  • Manufacturer: Mishimoto
  • Product: Mishimoto -10AN hose with fittings 4 ft
  • Part number: MMSBH-10-4NBK (black nylon), MMSBH-10-4 (stainless steel)
  • Length: 1.22 m (4 ft)
  • Connections: -10AN, one straight and one 90 degree swivel fitting
  • Inner core: CPE rubber
  • Outer braid: black nylon over stainless steel inner jacket, or stainless steel
  • Maximum pressure: 69 bar (1000 psi) black nylon, 52 bar (750 psi) stainless steel
  • Temperature range: -23 °C to 150 °C black nylon, -40 °C to 149 °C stainless steel
  • Compatible fluids: petroleum-based fuels, engine oil and coolant
  • Included: 1 pre-assembled -10AN hose

Installation and delivery

Mishimoto rates the installation as easy. Hand-tighten the nuts first and then secure them with a suitable spanner. Route the hose away from sharp edges and hot exhaust parts, and check that everything stays dry after the first drive. Lead time: 4 to 7 days.

A -10AN hose with both fittings already assembled: connect, tighten and drive.

Why choose this -10AN hose with fittings 4 ft?

Because the fittings are already assembled, you need no hose cutters or assembly tools and you can be sure the connection seals properly. The 1.22 m hose leaves enough room for neat routing through the engine bay. Mishimoto backs it with the Mishimoto Lifetime Warranty.

Frequently asked questions

Do I need to assemble the fittings myself?

No. The -10AN hose with fittings 4 ft comes pre-assembled with a straight and a 90 degree -10AN swivel fitting.

What is the difference between black nylon and stainless steel?

The black version has a nylon outer braid over a stainless steel inner jacket, handles up to 69 bar and does not abrade plastic or aluminium. The stainless version has a stainless steel outer braid and handles up to 52 bar.

Which fluids can run through the hose?

According to Mishimoto the CPE core is suitable for petroleum-based fuels, diesel, engine oil and coolant.

What is the lead time?

The lead time for this -10AN hose with fittings 4 ft is 4 to 7 days.

Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.

Additional information

Weight0,5 kg

Reviews

There are no reviews yet.

Be the first to review “Mishimoto universal -10AN hose with fittings 1.22 m (4 ft) straight and 90 degree”
EN

Your Shopping cart

Close