Shop

Description

Sparco Formula H-7 FIA harness 6-point

The Sparco Formula H-7 FIA harness is a professional 6-point harness for single-seaters and sports prototypes. Where most harnesses in this range are for saloon and rally cars, this one is designed for the tight cockpit of a formula car. The shoulder straps have loop fittings that you slide over a pin-type mounting on the chassis.

The pull-down adjusters can be set quickly and easily, even while wearing racing gloves. A bar for the adjusters is available separately. The 2 inch (5 cm) wide shoulder straps are intended for use with an FHR device. The harness is FIA 8853-2016 approved, exclusively for use with an FHR or HANS device.

Key benefits

• For single-seaters and sports prototypes
• FIA 8853-2016, for use with FHR/HANS
• Pull-down adjusters, easy to operate with gloves
• Ultra-light buckle for high loads
• Loop-fit crotch straps for more comfort
• 5 cm shoulder straps for a stable position on the FHR device
• Loop fittings on the shoulder straps for pin-type mounting

Suitable for

Formula cars and sports prototypes

• Single-seaters with pin-type mountings on the chassis
• Drivers with an FHR or HANS device

Technical specifications

• Brand: Sparco
• Part number: 04819H2
• Homologation: FIA 8853-2016, only with FHR/HANS
• Number of points: 6
• Shoulder straps: 2 inch (5 cm), loop fitting
• Lap and crotch straps: bolt plates with 13 mm bolt hole, bolts not included
• Adjusters: pull-down, bar available separately
• Colours: black, blue, red

Fitting and delivery

Slide the shoulder straps with their loops over the pin mountings on the chassis. Attach the lap belts and crotch straps with bolt plates (13 mm bolt hole); bolts are not included. Check the regulations of your class. Choose the colour when ordering. Delivery time 4 to 7 days.

Made for the cockpit of a single-seater: loop fittings, pull-down adjusters and FHR straps.

Why choose this Formula H-7 FIA harness?

Because it is set up specifically for formula cars and prototypes. The loop fittings and bolt plates match the usual chassis mountings, and the adjusters are easy to operate even with gloves on.

Frequently asked questions

Does the Formula H-7 FIA harness fit a saloon car?

The Formula H-7 FIA harness is designed for single-seaters and sports prototypes with pin and bolt-plate mountings. Other models in this range are intended for saloon and rally cars.

Are the bolts included?

No, the bolt plates have a 13 mm hole, but the bolts are not included.

Can I use the harness without a HANS?

No, the FIA 8853-2016 approval only applies with an FHR or HANS device.

Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.