Shop

Description

AST Multipoint Weld-in Roll Cage ASN Toyota MR2 W30 2-door Roadster

The AST Multipoint Weld-in Roll Cage ASN Toyota MR2 W30 2-door Roadster is a full roll cage for the Toyota MR2 W30 with two-door roadster body, welded to the body at 12 points. This ASN roll cage MR2 W30 is designed and built to the FIA homologation regulations for safety cages and is supplied as a welding kit that is welded into one unit in the car.

This is the heaviest anchoring AST makes for the Toyota MR2 W30: twelve weld points spread the forces over the body and make the connection between cage and shell extra stiff. The matching ASN/FIA documentation must be purchased together with the cage.

Key benefits

• Twelve weld points: the strongest possible connection to the body.
• Built to FIA regulations: designed and built to the FIA homologation regulations for safety cages.
• ASN/FIA documentation: available through a certification procedure that you receive by email after delivery.
• Anchored at the rear: in the trunk.
• V-shaped rear structure: the rear is built as a V.
• Gussets included: to reinforce the joints.
• Custom base plates: 3 mm thick steel, designed per car rather than universal.
• Exact fit: the body is digitised with laser scanners before the cage is drawn in 3D.
• Complete kit: cut and bent tubes, installation manual, welding practice material and welding T sample.

Fits

Toyota MR2 W30, 2-door Roadster

• Toyota MR2 W30 two-door roadster
• Version: full roll cage, multipoint weld-in, ASN version with 12 weld points
• Circuit use and competition

This cage is designed for the two-door roadster of the Toyota MR2 W30 and does not fit other body styles or generations.

Technical specifications

• Manufacturer: AST Roll Cages
• Manufacturer part number: CMBN04513
• Roof: suitable for a car with the original hardtop
• Rear anchoring: in the trunk
• Rear structure shape: V design
• Type: full roll cage, multipoint weld-in, ASN version
• Base plates: 3 mm steel, designed per car
• Mounting: 12 weld points on the body
• Weight: 210 kg
• Finish: welding kit, unpainted
• Included: cut and bent tubes, gussets, reinforcement plates, installation manual, welding practice material and welding T sample

Installation and delivery

The cage is built to order; the standard delivery time is 15 to 35 working days. It comes as a welding kit and is welded into one unit in the car. Leave the welding to someone with experience in roll cages and practise beforehand with the included welding practice material. This cage requires parts of the interior to be modified or removed, such as the dashboard, door panels and upholstery. On a Toyota MR2 W30, check beforehand that the mounting areas are free of rust: welding onto corroded panels gives a cage that will not do its job in a crash. This cage is intended for circuit and competition use; consult your own federation or sports organisation beforehand for the minimum safety requirements that apply to your car, version, engine and type of event.

Twelve weld points and a cage built to FIA regulations: made for anyone who races seriously.

Why choose this ASN roll cage MR2 W30?

If you race where a documented cage is required, a universal cage will not do. This ASN version is designed for the Toyota MR2 W30 to the FIA regulations and drawn to measure from a laser scan of the body. That gives you a tight fit to the shell instead of a cage that has to be adapted with filler plates.

Frequently asked questions

What does ASN mean?

ASN stands for national sporting authority. This ASN roll cage MR2 W30 comes with ASN/FIA documentation, which you obtain through a certification procedure.

Is the ASN/FIA documentation included?

The documentation must be purchased together with the cage. After delivery you receive the certification procedure by email, which you have to complete. If you have questions about it, contact us before you order.

What is the difference with the standard multipoint weld-in cage?

This ASN version has 12 weld points instead of ten and is meant for anyone who needs a cage built to the FIA regulations.

Can I weld the cage in myself?

Only if you have experience welding roll cages. A poor weld takes the strength out of the structure. If in doubt, leave it to a specialist.

Does this cage also fit other versions of the Toyota MR2 W30?

No. This cage is designed for the two-door roadster. Other body styles and generations have a different structure.

What is the delivery time?

The standard delivery time for this roll cage is 15 to 35 working days, because AST builds every cage to order.

Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.