Description
AST Bolt-in Roll Cage BMW E92 Coupé V4
The AST Bolt-in Roll Cage BMW E92 Coupé V4 is a full roll cage for the BMW 3 Series E92 with two-door coupé bodywork. This Bolt-in E92 Coupé V4 builds up the complete cage, from the main hoop and its braces to the front reinforcement bars running to the bulkhead, the door bars and an extra diagonal and harness bar.
The cage is designed and built by AST Roll Cages in Spain, for drivers who want a fully equipped cage that goes into the car in sections instead of being welded in as a single piece.
Key benefits
- Six bolted mounting points: the cage is bolted onto six foot plates that are welded to the bodyshell, so that the loads are transferred to reinforced points.
- Fitted in sections: the structure is divided by connecting sleeves, so the cage fits into the two-door car through the door opening.
- Fully equipped V4 level: main hoop with braces, front bars to the bulkhead, door bars plus an extra diagonal and harness bar.
- Harness bar as standard: a fixed anchorage point for the shoulder straps of your four-point or six-point harness.
- E355 steel: main hoop with a diameter of 45 mm, rest of the structure 40 mm, foot plates in 3 mm steel.
- Laser-scanned fit: AST digitises the bodyshell of the E92 Coupé and designs the cage in 3D, so that every tube ends up in the right place.
- Complete package: connecting sleeves, reinforcement plates, bolts, washers and nuts, documentation, fitting instructions and a sticker set are included in the delivery.
Suitable for
BMW 3 Series E92, two-door Coupé
- BMW 3 Series E92 Coupé, years of manufacture 2006 to 2013
- Type: full roll cage, version V4
- Drifting, track use and rallying
The E92 is the coupé within the E90 generation. For the E90 saloon, the E91 Touring and the E93 convertible, AST builds separate cages; these are not interchangeable.
Technical specifications
- Manufacturer: AST Roll Cages
- Sunroof: for roofs without a sunroof
- Headlining: for roofs without headlining
- Rear anchorage: in the rear suspension area
- Rear structure layout: V design
- Manufacturer part number: CMBN05415
- Type: full roll cage, bolt-in on welded foot plates
- Main hoop: E355 steel, 45 mm diameter
- Secondary structure: E355 steel, 40 mm diameter
- Foot plates: 3 mm steel, custom-designed for each car
- Mounting: 6 bolting points on 6 foot plates welded to the bodyshell
- Weight: 210 kg (manufacturer’s figure)
- Finish: welded and unpainted, supplied in sections joined by connecting sleeves
- Included: welded structure, connecting sleeves, reinforcement plates, bolts, washers and nuts, documentation, fitting instructions and sticker set
Fitting and delivery
The cage is built to order; the standard delivery time is 15 to 35 working days. Please note: bolt-in does not mean that no welding is involved. The six foot plates are welded to the bodyshell; only then is the cage bolted onto them. Expect to strip the interior and to use a fitter who is experienced with cage work.
A fully equipped cage that goes into the E92 Coupé in sections and is bolted onto six welded foot plates.
Why choose this Bolt-in E92 Coupé V4 roll cage?
AST digitises the bodyshell with laser scanners and designs the cage in 3D so that it fits your car exactly, with no trimming or cutting required. The V4 level gives you the complete package of bars without going straight to the heaviest specification: door bars for side protection, an extra diagonal brace for torsional rigidity and a harness bar for your belts. The cage is intended for track and competition use; always check the regulations of your own organiser before you enter.
Frequently asked questions
Can I fit this bolt-in cage without welding?
No. On the Bolt-in E92 Coupé V4, the six foot plates are welded to the bodyshell and the cage is then bolted to those plates. Bolt-in refers to the way the cage itself is attached and to the fact that it goes into the car in sections, not to the foot plates.
Why does this cage weigh 210 kg according to the manufacturer’s figure?
That is the value AST itself lists for this item. We reproduce that figure exactly as stated and do not correct it, so that what you read here matches what the manufacturer specifies.
What is the delivery time?
The standard delivery time for this roll cage is 15 to 35 working days.
Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.








Reviews
There are no reviews yet.