Shop

Description

AST Multipoint Weld-in Roll Cage BMW E24 Coupé V3

The AST Multipoint Weld-in Roll Cage BMW E24 Coupé V3 is a full roll cage for the BMW 6 Series E24 with 2-door coupé bodywork. This Multipoint E24 Coupé V3 has ten welded mounting points, front bars to the bulkhead and door bars in the door aperture.

The cage is designed and built by AST Roll Cages in Spain, for drivers who compete and want to be well protected in both a rollover and a side impact.

Key benefits

• Door bars: side protection across the large door aperture of the E24.
• Ten welded mounting points: the load is spread over more points in the bodyshell than with the standard weld-in cage.
• Front bars to the bulkhead: the gain in rigidity from the V2 is retained.
• E355 steel: main hoop 45 mm, rest of the structure 40 mm.
• 3 mm steel foot plates: custom-designed for each car.
• 3D design from a laser scan: the tubes follow the actual interior dimensions of your car.
• Unpainted weld-in kit: complete with gussets and mounting hardware.

Suitable for

BMW 6 Series E24, 2-door Coupé

• BMW 6 Series E24 2-door Coupé, years 1976 to 1989
• Type: multipoint weld-in roll cage, version V3
• Drifting, track use and rallying

Technical specifications

• Manufacturer: AST Roll Cages
• Manufacturer part number: CMBN07815
• Sunroof: for roofs without a sunroof
• Headlining: for roofs without headlining
• Rear anchorage: in the rear suspension area
• Rear structure layout: X design
• Type: full roll cage, multipoint weld-in (permanent)
• Main hoop: E355 steel, 45 mm diameter
• Secondary structure: E355 steel, 40 mm diameter
• Foot plates: 3 mm steel, custom-designed for each car
• Mounting: 10 welded mounting points on the bodyshell
• Weight: 71 kg (manufacturer’s figure)
• Finish: unpainted weld-in kit
• Included: weld-in kit, gussets, reinforcement plates, bolts, washers and nuts, documentation, fitting instructions and sticker set

Fitting and delivery

The cage is built to order; the standard delivery time is 15 to 35 working days. Before final welding, check that you can climb in comfortably past the door bars with a bucket seat fitted and your helmet on.

Door bars plus ten welded mounting points: the V3 multipoint provides side protection and spreads the forces widely across the bodyshell.

Why choose this Multipoint E24 Coupé V3 roll cage?

A coupé with long doors has a large unprotected side area. The door bars fill that area and also make the structure more rigid in the longitudinal direction. Combined with the ten welded mounting points, you get a cage that is a clear step forward in terms of both safety and chassis behaviour.

Frequently asked questions

How much space do I lose because of the door bars?

The door bars of the Multipoint E24 Coupé V3 run through the door aperture, which makes getting in tighter. Because AST draws up the cage in 3D after a laser scan, this restriction is kept to what is functionally necessary.

Is this roll cage FIA-approved?

AST states on its product page that this structure has been designed to FIA Appendix J for the BMW 633 CSi and 635 CSi. No homologation number is listed for this item, so always check the regulations of your own federation or sporting body before you enter an event.

What is the delivery time?

The standard delivery time for this roll cage is 15 to 35 working days.

Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.