Description
AST Multipoint Weld-in Roll Cage BMW E30 Coupé V5
The AST Multipoint Weld-in Roll Cage BMW E30 Coupé V5 is a full roll cage for the BMW E30 with 2-door coupé bodywork. This Multipoint E30 Coupé V5 is the most comprehensive specification in the range: the complete set of bars, bringing together all the front reinforcements, door bars, diagonals and the harness bar. Please note: this is the cage for the rear-wheel-drive E30; a separate cage is available for the all-wheel-drive 325iX.
The cage is designed and built by AST Roll Cages in Spain, for builders who are setting up their E30 as a fully-fledged competition car and want no compromise whatsoever on rigidity or safety.
Key benefits
- Complete set of bars, so you will not need to weld anything on later as your ambitions grow.
- Maximum torsional rigidity for an E30 bodyshell, as the footwell area, centre section and rear are all integrated into the structure.
- Ten welded mounting points on the bodyshell, supplemented by gussets and reinforcement plates in 3 mm steel.
- Full side protection thanks to the door bars in both doors.
- Harness bar and extra diagonals for correct harness mounting and a hoop that holds its shape.
- Best basis for set-up work, as a rigid bodyshell makes changes to springs and dampers measurable.
- 71 kg for the most comprehensive specification, thanks to thin-walled E355 steel in 45 and 40 mm.
Suitable for
BMW E30, 2-door Coupé
- BMW E30 2-door coupé, rear-wheel-drive versions only
- Not intended for the all-wheel-drive BMW 325iX; AST supplies a separate cage for that model
- Type: multipoint weld-in roll cage, version V5
- Drifting, track use and rallying
Technical specifications
- Manufacturer: AST Roll Cages
- Manufacturer part number: CMBN00437
- Sunroof: for roofs without a sunroof
- Headlining: for roofs without headlining
- Rear anchorage: in the rear suspension area
- Rear structure layout: X design
- Type: full roll cage, multipoint weld-in (permanent)
- Main hoop: E355 steel, 45 mm diameter
- Secondary structure: E355 steel, 40 mm diameter
- Foot plates: 3 mm steel, custom-designed for each car
- Mounting: 10 welded mounting points on the bodyshell
- Weight: 71 kg (manufacturer’s figure)
- Finish: unpainted weld-in kit
- Included: weld-in kit, gussets, reinforcement plates, bolts, washers and nuts, documentation, fitting instructions and sticker set
- FIA homologation as stated by AST: N-5401 / A-5401 / N-5138 / A-5138 / N-5292 / A-5292 / N-5327 / A-5327, valid for the BMW 318is, 323i, 325i and M3 versions
Fitting and delivery
The cage is built to order; the standard delivery time is 15 to 35 working days. AST digitises the bodyshell with laser scanners and designs the cage in 3D, so that it fits your car exactly. For this specification level, you will need a fully stripped interior and a spacious welding workshop; plan the welding sequence in advance, as the complete set of bars limits the space around the main hoop.
The V5 is the end point of the multipoint range: everything is included, and there is nothing left to weld on later.
Why choose this Multipoint E30 Coupé V5 roll cage?
Anyone doing a ground-up build of an E30 does not want to weld twice. From day one, the Multipoint E30 Coupé V5 includes every bar that AST has designed for this chassis, welded into the bodyshell at ten points. You get a shell that behaves as a single unit, so your suspension set-up finally does what you expect of it and your protection is at the highest level in this range.
Frequently asked questions
Is the V5 overkill for a drift car?
That depends on your ambitions. If you drift competitively or make a lot of contact, you will benefit all the more from the full set of bars of the Multipoint E30 Coupé V5: more rigidity, more protection and no later modifications needed.
How does AST make sure the cage fits?
AST digitises the bodyshell with laser scanners and designs the cage in 3D based on that scan. As a result, every tube is bent to suit the E30 Coupé and does not need any rework when it is welded in.
Does this cage also fit a 325iX?
No. This cage is made for the rear-wheel-drive E30 Coupé. The all-wheel-drive 325iX has a different floor and requires a separate cage.
What is the delivery time?
The standard delivery time for this roll cage is 15 to 35 working days.
Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.








Reviews
There are no reviews yet.