AST Multipoint Weld-in Roll Cage BMW E30 Sedan V4

€1.364,54 Incl. VAT

AST Multipoint Weld-in Roll Cage BMW E30 Sedan V4

This full roll cage adds an extra diagonal brace and a harness bar to the V3 frame, so you can attach your harnesses to a certified point. Ten welded mounting points anchor the structure in the rear-wheel-drive BMW E30 4-door saloon. The unpainted weld-in kit weighs 71 kg and includes gussets, reinforcement plates, mounting hardware and fitting instructions. Delivery time 15 to 35 working days.

Available on back-order|Estimated delivery time: 15 tot 35 werkdagen

SKU: CMBN00360 Category: Brand:

Description

AST Multipoint Weld-in Roll Cage BMW E30 Sedan V4

The AST Multipoint Weld-in Roll Cage BMW E30 Sedan V4 is a full roll cage for the BMW E30 with 4-door saloon bodywork. This Multipoint E30 Sedan V4 extends the V3 with an extra diagonal brace in the main hoop and a separate harness bar, the level at which the cage also takes over your harness mounting. This version is intended for the RWD model, the rear-wheel-drive E30, and not for the all-wheel-drive 325iX.

The cage is designed and built by AST Roll Cages in Spain, for drivers who want to make their car race-ready without going straight for the most comprehensive version.

Key benefits

  • Extra diagonal brace prevents the main hoop from twisting under lateral load.
  • Harness bar provides a solid, correctly positioned mounting point for 4-point and 6-point harnesses.
  • Door bars and front reinforcement bars are all present, carried over from the V3.
  • Ten welded mounting points make the cage a load-bearing part of the bodyshell.
  • 71 kg for the complete weld-in kit.
  • Exact fit thanks to a digital survey of the E30 saloon.
  • Supplied unpainted with documentation, fitting instructions and a sticker set.

Suitable for

BMW E30, 4-door saloon

  • BMW E30 4-door saloon
  • Drive: RWD, i.e. the rear-wheel-drive E30 and not the all-wheel-drive 325iX
  • Type: multipoint weld-in roll cage, version V4
  • Drifting, track use and rallying

Technical specifications

  • Manufacturer: AST Roll Cages
  • Manufacturer part number: CMBN00360
  • Sunroof: for roofs without a sunroof
  • Headlining: for roofs without headlining
  • Rear anchorage: in the rear suspension area
  • Rear structure layout: X design
  • Type: full roll cage, multipoint weld-in (permanent)
  • Main hoop: E355 steel, 45 mm diameter
  • Secondary structure: E355 steel, 40 mm diameter
  • Foot plates: 3 mm steel, custom-designed for each car
  • Mounting: 10 welded mounting points on the bodyshell
  • Weight: 71 kg (manufacturer’s figure)
  • Finish: unpainted weld-in kit
  • Included: weld-in kit, gussets, reinforcement plates, bolts, washers and nuts, documentation, fitting instructions and sticker set

Fitting and delivery

The cage is built to order; the standard delivery time is 15 to 35 working days. AST digitises the bodyshell with laser scanners and designs the cage in 3D, so that it fits your car exactly. Settle on the seat position before the harness bar is permanently welded in: the angle of the shoulder straps depends on it.

A harness bar integrated into the cage is always stronger than a harness mounting point in the floor pan.

Why choose this Multipoint E30 Saloon V4 roll cage?

For many drivers, the V4 is the practical end point. You get the full protective structure, a diagonal brace that keeps the main hoop in place and a harness bar to which you can securely attach your harnesses. If you are not chasing every tenth of a second but do want to race properly and safely, this version is all you need.

Frequently asked questions

Can I attach my harnesses to the harness bar?

Yes, that is exactly what the bar in the Multipoint E30 Sedan V4 is for. Use the correct eyes or loops and follow your harness manufacturer’s instructions on the permitted angle of the shoulder straps.

Is this cage also available for the all-wheel-drive 325iX?

Not in this version. This item is the RWD version for the rear-wheel-drive E30 saloon; for the all-wheel-drive 325iX, AST builds a separate cage.

What is the delivery time?

The standard delivery time for this roll cage is 15 to 35 working days.

Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.

Additional information

Weight71 kg
Car make

BMW

Model

E30

Reviews

There are no reviews yet.

Be the first to review “AST Multipoint Weld-in Roll Cage BMW E30 Sedan V4”
EN

Your Shopping cart

Close