Description
AST Multipoint Weld-in Roll Cage BMW E30 Touring V2
The AST Multipoint Weld-in Roll Cage BMW E30 Touring V2 is a full roll cage for the BMW E30 with 5-door Touring bodywork. This Multipoint E30 Touring V2 builds on the basic cage with front reinforcement bars that run through to the bulkhead, designed specifically for the rear-wheel-drive E30 Touring.
The cage is designed and built by AST Roll Cages in Spain, for drivers who, alongside safety, are above all looking for a more rigid front end.
Key benefits
- Front reinforcement bars to the bulkhead tie the cage to the front section of the bodyshell.
- Sharper steering response as torsion between the strut towers and the transmission tunnel is reduced.
- Ten welded mounting points instead of the eight on a standard weld-in cage.
- E355 steel with a 45 mm main hoop and 40 mm for the rest of the structure.
- Foot plates in 3 mm steel, custom-designed for each car.
- Complete weld-in kit including gussets and all bolts, washers and nuts.
Suitable for
BMW E30 3 Series, 5-door Touring, rear-wheel drive
- BMW E30 3 Series 5-door Touring
- Only the rear-wheel-drive E30 Touring
- Type: multipoint weld-in roll cage, version V2
- Drifting, track use and rallying
Technical specifications
- Manufacturer: AST Roll Cages
- Manufacturer part number: CMBN04767
- Sunroof: for roofs without a sunroof
- Headlining: for roofs without headlining
- Rear anchorage: in the rear suspension area
- Rear structure layout: X design
- Type: full roll cage, multipoint weld-in (permanent)
- Main hoop: E355 steel, 45 mm diameter
- Secondary structure: E355 steel, 40 mm diameter
- Foot plates: 3 mm steel, custom-designed for each car
- Mounting: 10 welded mounting points on the bodyshell
- Weight: 71 kg (manufacturer’s figure)
- Finish: unpainted weld-in kit
- Included: weld-in kit, gussets, reinforcement plates, bolts, washers and nuts, documentation, fitting instructions and sticker set
Fitting and delivery
The cage is built to order; the standard delivery time is 15 to 35 working days. When fitting, pay attention to where the front bars pass through to the bulkhead: the dashboard and wiring have to make way for them, so allow for extra dismantling work.
The front bars to the bulkhead make V2 the first step where you really feel the gain in rigidity through the steering wheel.
Why choose this Multipoint E30 Touring V2 roll cage?
AST digitises the bodyshell with laser scanners and designs the cage in 3D, so it fits your car exactly. That matters all the more for the front reinforcement bars, as they run past many existing body parts. On the rear-wheel-drive E30 Touring, this gives you a tight front end without endless test-fitting and cutting.
Frequently asked questions
What does V2 add to the basic version?
The Multipoint E30 Touring V2 has front reinforcement bars that run to the bulkhead. They tie the cage to the front section of the bodyshell and reduce torsion around the strut towers.
Does the cage fit without modifications?
AST scans the bodyshell with laser scanners and designs the cage in 3D for each model, so the tubes are already bent and cut to size. Aligning and welding are still a job for an experienced welder, though.
What is the delivery time?
The standard delivery time for this roll cage is 15 to 35 working days.
Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.








Reviews
There are no reviews yet.