Shop

Description

AST Multipoint Weld-in Roll Cage BMW E36 Touring V4

The AST Multipoint Weld-in Roll Cage BMW E36 Touring V4 is a full roll cage for the BMW E36 with 5-door Touring bodywork. This Multipoint Touring V4 builds on the door bars of the V3 and adds extra diagonal bars and harness bars.

The cage is designed and built by AST Roll Cages in Spain, for drivers who put their Touring to serious use on the circuit, the drift track or rally stages and want a permanent structure with maximum rigidity.

Key benefits

• Extra diagonal bars make the chassis noticeably more rigid than the V3 layout.
• Harness bars give your harness a proper mounting point behind the seat.
• Multipoint weld-in construction, permanently welded to the bodyshell at multiple points.
• Model-specific design for the 5-door Touring bodywork, so none of the fitting and cutting a universal cage requires.
• Supplied as an unpainted weld-in kit, so you choose the colour and finish yourself.
• Full roll cage that runs through the car from front to rear.
• Built to order by AST Roll Cages in Spain.

Suitable for

BMW E36, 5-door Touring

• BMW E36 5-door Touring
• Type: multipoint weld-in roll cage, version V4
• Drifting, track use and rallying

Technical specifications

• Manufacturer: AST Roll Cages
• Manufacturer part number: CMBN06828
• Sunroof: for roofs without a sunroof
• Headlining: for roofs without headlining
• Rear anchorage: in the rear suspension area
• Rear structure layout: V design
• Type: full roll cage, multipoint weld-in (permanent)
• Main hoop: E355 steel, 45 mm diameter
• Secondary structure: E355 steel, 40 mm diameter
• Foot plates: 3 mm steel, custom-designed for each car
• Mounting: 10 welded mounting points on the bodyshell
• Weight: 71 kg (manufacturer’s figure)
• Finish: unpainted weld-in kit
• Included: weld-in kit, gussets, reinforcement plates, bolts, washers and nuts, documentation, fitting instructions and sticker set

Fitting and delivery

The cage is built to order; the standard delivery time is 15 to 35 working days. AST digitises the bodyshell with laser scanners and designs the cage in 3D, so it fits your car exactly. As this is a weld-in cage, it should be fitted by an experienced welder or cage builder, with the interior completely stripped out of the car.

The V4 gives you the rigidity of a fully developed weld-in cage without going straight for the heaviest version.

Why choose this Multipoint Touring V4 roll cage?

The V4 sits exactly at the point where extra rigidity does not yet come at the expense of a usable interior. You get the diagonals and harness bars you really feel on track, in a kit that fits neatly into the Touring. For anyone who wants to upgrade the structure of their E36 Touring properly, this is a logical step.

Frequently asked questions

What is the difference from the V3 version?

The Multipoint Touring V4 has the same door bars as the V3, but adds extra diagonal bars and harness bars for more rigidity and correct harness mounting.

Can I remove this cage later?

No. This is a weld-in version that is permanently welded to the bodyshell. If you are looking for a removable solution, take a look at a bolt-in version.

What is the delivery time?

The standard delivery time for this roll cage is 15 to 35 working days.