Description
AST Multipoint Weld-in Roll Cage BMW E46 Compact V4 NASCAR door
The AST Multipoint Weld-in Roll Cage BMW E46 Compact V4 NASCAR Door Bars is a full roll cage for the BMW E46 with 3-door Compact bodywork. This Multipoint E46 Compact V4 NASCAR combines extra diagonal bars and a harness bar with door bars in several planes alongside the driver, and is permanently welded to the bodyshell at 10 points.
The cage is designed and built by AST Roll Cages in Spain, for drivers who leave nothing to chance and want both maximum rigidity and maximum side protection in their Compact.
Key benefits
- NASCAR door bars: multiple tubes in different planes alongside the driver.
- Harness bar: a fixed mounting point for the shoulder straps of your racing harness.
- Extra diagonals: the roof and rear planes are braced against twisting.
- Front reinforcement bars: the cage extends into the front section of the car.
- Ten welded mounting points: a permanent, widely distributed connection to the bodyshell.
- E355 steel: 45 mm main hoop, 40 mm for the other tubes, 3 mm foot plates.
- Unpainted weld-in kit: complete with gussets and mounting hardware.
Suitable for
BMW E46, 3-door Compact
- BMW E46 3-door Compact
- Type: multipoint weld-in roll cage, version V4 with NASCAR door bars
- Drifting, track use and rallying
Technical specifications
- Manufacturer: AST Roll Cages
- Manufacturer part number: CMBN03587
- Sunroof: for roofs without a sunroof
- Headlining: for roofs without headlining
- Rear anchorage: in the rear suspension area
- Rear structure layout: X design
- Type: full roll cage, multipoint weld-in (permanent)
- Main hoop: E355 steel, 45 mm diameter
- Secondary structure: E355 steel, 40 mm diameter
- Foot plates: 3 mm steel, custom-designed for each car
- Mounting: 10 welded mounting points on the bodyshell
- Weight: 71 kg (manufacturer’s figure)
- Finish: unpainted weld-in kit
- Included: weld-in kit, gussets, reinforcement plates, bolts, washers and nuts, documentation, fitting instructions and sticker set
Fitting and delivery
The cage is built to order; the standard delivery time is 15 to 35 working days. This is the most extensive version, so expect a fully stripped interior and a welder experienced with roll cages. AST digitises the bodyshell with laser scanners and designs the cage in 3D so that it fits your car exactly.
This is the top model of the Compact range: everything AST designs for this body style is included.
Why choose this Multipoint E46 Compact V4 NASCAR roll cage?
This version leaves nothing out. The diagonals keep the structure rigid, the harness bar anchors your harness, and the multi-plane door bars shield the driver’s side over the full height of the door opening. For a competition car that is driven hard, this is the final version you won’t need to revisit.
Frequently asked questions
How does it differ from the V3 with NASCAR door bars?
The Multipoint E46 Compact V4 NASCAR adds extra diagonal bars and a harness bar. The NASCAR door layout and the ten welded mounting points are the same in both versions.
Is there still enough room for a bucket seat?
Yes, but the margin is small. Fit the seat in the desired position before the door bars and harness bar are welded in for good.
How can I be sure the cage will fit?
AST scans the bodyshell of the E46 3-door Compact with laser scanners and designs the cage around it in 3D. This means no adjusting or re-bending is needed during fitting.
What is the delivery time?
The standard delivery time for this roll cage is 15 to 35 working days.
Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.








Reviews
There are no reviews yet.