Description
AST Multipoint Weld-in Roll Cage BMW E46 Sedan V4
The AST Multipoint Weld-in Roll Cage BMW E46 Sedan V4 is a full roll cage for the BMW E46 with 4-door saloon bodywork. This Multipoint E46 Sedan V4 has the complete V3 package and adds an extra diagonal brace and a harness bar, giving the harnesses a fixed anchorage point within the structure.
The cage is designed and built by AST Roll Cages in Spain, for drivers who use a four-point or six-point harness and a bucket seat and don’t want to leave their mounting points to the car’s sheet metal.
Key benefits
- The harness bar gives the shoulder straps a solid mounting point at the correct height within the cage itself.
- An extra diagonal brace absorbs torsion in the main hoop and keeps the roof area in shape in an impact.
- Door bars on both sides, carried over from the V3 version.
- Front reinforcement bars to the bulkhead for rigidity at the front of the car.
- Ten welded mounting points on the bodyshell for even load distribution.
- E355 steel in 45 mm for the main hoop and 40 mm for the rest of the structure.
- Unpainted weld-in kit with gussets, reinforcement plates and complete mounting hardware.
Suitable for
BMW E46, 4-door saloon
- BMW E46 4-door saloon
- Type: multipoint weld-in roll cage, version V4
- Drifting, track use and rallying
Technical specifications
- Manufacturer: AST Roll Cages
- Manufacturer part number: CMBN03836
- Sunroof: for roofs without a sunroof
- Headlining: for roofs without headlining
- Rear anchorage: in the rear suspension area
- Rear structure layout: V design
- Type: full roll cage, multipoint weld-in (permanent)
- Main hoop: E355 steel, 45 mm diameter
- Secondary structure: E355 steel, 40 mm diameter
- Foot plates: 3 mm steel, custom-designed for each car
- Mounting: 10 welded mounting points on the bodyshell
- FIA homologation number: N-5658 / A-5658 (as stated by AST Roll Cages, for the BMW 320i)
- Weight: 71 kg (manufacturer’s figure)
- Finish: unpainted weld-in kit
- Included: weld-in kit, gussets, reinforcement plates, bolts, washers and nuts, documentation, fitting instructions and sticker set
Fitting and delivery
The cage is built to order; the standard delivery time is 15 to 35 working days. AST digitises the bodyshell with laser scanners and designs the cage in 3D, so that it fits your car exactly. Determine the seating position before any welding is done, as the harness bar has to match the driver’s shoulder height.
With its own harness bar, the V4 anchors the harnesses to the cage rather than to the car’s sheet metal.
Why choose this Multipoint E46 Saloon V4 roll cage?
A harness is only as strong as the point it is anchored to. This Multipoint E46 Sedan V4 addresses that with a harness bar built into the structure, while the extra diagonal brace holds the main hoop in place under heavy loads. For anyone putting in serious track miles, this is the logical step up from V3.
Frequently asked questions
Where exactly is the harness bar located?
On the Multipoint E46 Sedan V4, the harness bar runs horizontally behind the seats between the uprights of the main hoop, so the shoulder straps can be wrapped around it or attached to it directly.
Can I still use my rear seats?
No. This version requires the rear seats and the associated trim to be removed, as well as other interior parts around the bars and the mounting feet.
Is this cage suitable for competition?
For the Multipoint E46 Sedan V4, AST Roll Cages quotes FIA homologation numbers N-5658 and A-5658, listed for the BMW 320i. Always submit the cage to your own federation or sporting body to check that it meets their requirements.
What is the delivery time?
The standard delivery time for this roll cage is 15 to 35 working days.
Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.








Reviews
There are no reviews yet.