AST Multipoint Weld-in Roll Cage BMW E92 Coupé V3

€1.300,93 Incl. VAT

AST Multipoint Weld-in Roll Cage BMW E92 Coupé V3

Full roll cage for the BMW 3 Series E92 Coupé, welded into the bodyshell at ten points. Version V3 combines the main hoop with backstays, the front reinforcement bars to the bulkhead and door bars on the left and right. The main hoop is made of E355 steel with a diameter of 45 mm, and the cage is custom-made from a laser scan of the bodyshell and supplied unpainted. Delivery time 15 to 35 working days.

Available on back-order|Estimated delivery time: 15 tot 35 werkdagen

SKU: CMBN04005 Category: Brand:

Description

AST Multipoint Weld-in Roll Cage BMW E92 Coupé V3

The AST Multipoint Weld-in Roll Cage BMW E92 Coupé V3 is a full roll cage for the BMW 3 Series E92 with 2-door coupé bodywork. This Multipoint E92 Coupé V3 brings together the main hoop with braces, the front reinforcement bars to the bulkhead and door bars in both doors in a single welded-in structure.

The cage is designed and built by AST Roll Cages in Spain, for drifters and track drivers who want to stiffen their E92 Coupé structurally while also getting a higher level of side protection.

Key benefits

  • Door bars on the left and right absorb side impacts, something the lower versions do not offer.
  • Ten welded mounting points spread the loads widely across the bodyshell instead of over a handful of foot plates.
  • E355 steel with a 45 mm main hoop and a 40 mm secondary structure.
  • Foot plates in 3 mm steel, custom-designed for each car.
  • Laser-scan fit ensures that every tube drops into place without endless trial fitting and grinding.
  • Noticeably stiffer chassis, so the suspension responds more predictably over kerbs and through changes of direction.
  • Supplied unpainted, so you choose the colour and the painting process yourself.

Suitable for

BMW 3 Series E92, 2-door Coupé

  • BMW 3 Series E92 Coupé, years of manufacture 2006 to 2013
  • Type: multipoint weld-in roll cage, version V3
  • Drifting, track use and rallying

The E92 is the coupé of the E90 generation. The saloon (E90), the Touring (E91) and the convertible (E93) each have their own cage, and these are not interchangeable with this Coupé version.

Technical specifications

  • Manufacturer: AST Roll Cages
  • Sunroof: for roofs without a sunroof
  • Headlining: for roofs without headlining
  • Rear anchorage: in the rear suspension area
  • Rear structure layout: V design
  • Manufacturer part number: CMBN04005
  • Type: full roll cage, multipoint weld-in (permanent)
  • Main hoop: E355 steel, 45 mm diameter
  • Secondary structure: E355 steel, 40 mm diameter
  • Foot plates: 3 mm steel, custom-designed for each car
  • Mounting: 10 welded mounting points on the bodyshell
  • Weight: 71 kg (manufacturer’s figure)
  • Finish: unpainted weld-in kit
  • Included: weld-in kit, gussets, reinforcement plates, mounting hardware, documentation, fitting instructions, sticker set

Fitting and delivery

The cage is built to order; the standard delivery time is 15 to 35 working days. AST digitises the bodyshell with laser scanners and designs the cage in 3D, so that it fits your car exactly. Welding in is permanent, so have this work carried out by an experienced welder with the interior and trim completely removed. This roll cage is intended for track and competition use; check the regulations of your own organiser beforehand.

Version V3 is the point at which the cage moves on from pure chassis rigidity to genuine side protection.

Why choose this Multipoint E92 Coupé V3 roll cage?

A welded-in cage forms a single unit with the bodyshell and therefore provides more rigidity than a bolted structure of the same level. With ten welded mounting points, the loads are absorbed over a wide area, and the door bars make this version suitable for drivers who compete rather than just doing track days.

Frequently asked questions

What is the difference between V2 and V3?

The V2 has the main hoop with backstays and the front reinforcement bars to the bulkhead. The Multipoint E92 Coupé V3 adds door bars in both doors for protection in a side impact.

What exactly will I receive?

You receive an unpainted weld-in kit with the bent and cut-to-length tubes, gussets, reinforcement plates, mounting hardware, documentation, the fitting instructions and a sticker set.

What is the delivery time?

The standard delivery time for this roll cage is 15 to 35 working days.

Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.

Additional information

Weight71 kg
Car make

BMW

Model

E92

Reviews

There are no reviews yet.

Be the first to review “AST Multipoint Weld-in Roll Cage BMW E92 Coupé V3”
EN

Your Shopping cart

Close