AST Removable Half Roll Cage BMW E30 Coupé AWD V1

€611,35 Incl. VAT

AST Removable Half Roll Cage BMW E30 Coupé AWD V1

A half roll cage for the all-wheel-drive BMW E30 325iX Coupé that you can take back out of the car in sections via connecting sleeves. The structure sits in the rear compartment on four bolting points on four foot plates in 3 mm steel welded to the bodyshell. Main hoop in 45 mm E355 steel, other tubes 40 mm, with a shipping weight of 71 kg. Supplied unpainted, complete with mounting hardware and instructions. Delivery time 15 to 35 working days.

Available on back-order|Estimated delivery time: 15 tot 35 werkdagen

Choose whether you want a sunroof cut-out in the roll cage.

Choose whether the roll cage needs to allow for headlining.

SKU: CMBN00444 Category: Brand:

Description

AST Removable Half Roll Cage BMW E30 Coupé AWD V1

The AST Removable Half Roll Cage BMW E30 Coupé AWD V1 is a half roll cage for the BMW 3 Series E30 with 2-door coupé bodywork and all-wheel drive, the E30 325iX. This Removable Half Cage E30 Coupé AWD V1 has the same basic layout in the rear compartment as the fixed version, but is divided into sections via connecting sleeves so that you can take it out of the car. This version is designed for the all-wheel-drive E30 and does not fit the rear-wheel-drive E30.

The cage is designed and built by AST Roll Cages in Spain, for 325iX drivers who also want to use their car normally away from the track.

Key benefits

  • Removable: the connecting sleeves let you lift the structure out of the rear compartment in sections.
  • For the 325iX: designed specifically around the bodyshell of the all-wheel-drive E30 Coupé.
  • Light: with a stated weight of 71 kg, this is one of the lightest AST structures for the E30.
  • Four welded foot plates: 3 mm steel, custom-designed for each car, with four bolting points.
  • E355 steel: 45 mm main hoop, other tubes 40 mm.
  • Laser-scanned fit: the bodyshell has been digitised, so the tubes run tightly along the panels.
  • Complete package: reinforcement plates, bolts, washers, nuts, documentation, fitting instructions and a sticker set are included.
  • Available for cars with and without a sunroof and with and without headlining – you choose this when ordering

Suitable for

BMW 3 Series (E30), 2-door coupé with all-wheel drive

  • BMW 3 Series (E30), 2-door coupé with all-wheel drive, the E30 325iX
  • Not suitable for the rear-wheel-drive E30
  • Type: half roll cage, removable, version V1
  • Drifting, track use and rallying

Technical specifications

  • Manufacturer: AST Roll Cages
  • Manufacturer part number: CMBN00444
  • Rear anchorage: in the rear suspension area
  • Rear structure layout: X design
  • Type: half roll cage, removable via connecting sleeves
  • Main hoop: E355 steel, 45 mm diameter
  • Secondary structure: E355 steel, 40 mm diameter
  • Foot plates: 3 mm steel, custom-designed for each car
  • Mounting: 4 bolting points on 4 foot plates welded to the bodyshell
  • Weight: 71 kg (manufacturer’s figure)
  • Finish: welded and unpainted, split into sections via connecting sleeves
  • Included: welded structure, connecting sleeves, reinforcement plates, bolts, washers and nuts, documentation, fitting instructions and sticker set

Fitting and delivery

The cage is built to order; the standard delivery time is 15 to 35 working days. The four foot plates are welded to the bodyshell once; the cage is then bolted onto them and can be detached again via the connecting sleeves. Have the welding done by an experienced welder, as the plates carry the entire structure.

A half roll cage that you fit for a track day and take back out of the 325iX in sections afterwards.

Why choose this Removable Half Cage E30 Coupé AWD V1?

AST digitises the bodyshell with laser scanners and designs the cage in 3D so that it fits your 325iX exactly. Being both removable and light makes this version attractive for a car that still goes out on the road as normal. The foot plates stay in place, so refitting takes little time afterwards.

Frequently asked questions

How exactly does removal work?

The Removable Half Cage E30 Coupé AWD V1 is divided into sections via connecting sleeves. You undo the fixings, take the sections out of the car and leave only the welded foot plates behind.

Does this cage fit the rear-wheel-drive E30?

No. This version is made for the all-wheel-drive E30 325iX. For the rear-wheel-drive E30, AST has dedicated versions in its range.

What if my car has a sunroof or headlining?

When ordering, please state whether your car has a sunroof and whether the headlining will stay in place, and AST will tailor the roll cage accordingly.

What is the delivery time?

The standard delivery time for this roll cage is 15 to 35 working days.

Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.

Additional information

Weight71 kg
Car make

BMW

Model

E30

Reviews

There are no reviews yet.

Be the first to review “AST Removable Half Roll Cage BMW E30 Coupé AWD V1”
EN

Your Shopping cart

Close